![](//vs1.manuzoid.com/store/data-gzf/488342250378c26984c36777397678ff/2/000868864.htmlex.zip/bg2.jpg)
2
InstallingtheBlade
Partsneededforthisprocedure:
1Bladebolt
1Blade
Procedure
WARNING
Thebladeissharp;contactingthebladecanresult
inseriouspersonalinjury.
•Disconnectthewirefromthesparkplug.
•Weargloveswhenhandlingtheblade.
1.Removethebolt,retainingbolt,andspacerstogain
accesstothebladecarrierassembly.
2.Retainthespacers,anddiscardthebladecarrier
assemblyandthebolt.
3.Installthebladeusingthesuppliedbladeboltandthe
retainedspacersandretainingboltasshowninFigure
2.RefertotheOperator’sManualforheightadjustment
procedure.
Important:Positionthecurvedendsoftheblade
topointawayfromthemachinesothewords
“GrassSide”areonthebottomofthebladewhen
cutting.
Figure2
1.Bladebolt3.Existingspacers
2.Existingretainingbolt4.Blade
4.Tightenthebladeboltto25N-m(18ft-lb).
2