Broadcom USB 2380 AB vs AA summary of changes User guide

  • Hello! I am an AI chatbot trained to assist you with the Broadcom USB 2380 AB vs AA summary of changes User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
USB 2380 AB vs. AA Changes Summary
© PLX Technology, www.plxtech.com Page 1 of 1 06June12; v1.0
Introduction
USB 2380AB is a metal-only mask revision for USB 2380AA silicon. The AB silicon revision corrects a
number of issues that were found during testing and validation of the USB 2380AA device. These changes
are described below. Refer to the USB 2380 Errata documentation for details,
http://www.plxtech.com/products/usbcontrollers/usb2380.
USB 2380AA Documented Errata Corrected in USB 2380AB Silicon
Erratum #
Description
Risk
Category
Corrected in
AB
Err_1
Enabling ASPM L0s (and L1) on PCI Express ports causes
spurious ERR_CORR messages to be transmitted.
Low
No
Err_2
DMA channel for USB OUT endpoint may hang under
specific conditions
Med
Yes
Err_3
DMA channel for USB IN endpoint may hang under specific
conditions
Med
Yes
/