SportsArt Fitness T631 User manual

TABLE OF CONTENTS

CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED TV)

FOR THE T652 TREADMILL

CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED TV)

FOR THE T621/T631 TREADMILL

CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED

ANALOG TV) OPERATING MANUAL

CARDIO ACTIVE ENTERTAINMENT STATION – INTEGRATED

DIGITAL TV

CHAPTER 1:

CHAPTER 2:

CHAPTER 3:

CHAPTER 4:

1.1 INSTALLATION MANUAL..................................................................................

1.2 INSTALLATION INSTRUCTIONS.......................................................................

2.1 INSTALLATION MANUAL....................................................................................

2.2 INSTALLATION INSTRUCTIONS.......................................................................

3.1 TV Operating Instructions...................................................................................

3.2 CATV Function Settings......................................................................................

3.3 OSD Menu and Keys in CATV Mode..................................................................

3.4 How to Perform the Search Function..................................................................

3.4.1 Search Function Illustrations - TV System........................................................

3.4.2 Ntsc Cable Illustration.......................................................................................

3.4.3 TV Scan.............................................................................................................

3.4.4 TV Channel Search in Progress........................................................................

3.4.5 iPod Function....................................................................................................

3.5.1 iPod Function Illustrations – iPod System.........................................................

3.5.2 iPod Function Illustrations – iPod ON................................................................

3.5.3 iPod Function Illustrations – Source Key...........................................................

3.6.1 OSD Menu, Other Functions - Video................................................................

3.6.2 OSD Menu, Other Functions - Audio.................................................................

3.6.3 OSD Menu, Other Functions - System..............................................................

3.6.4 OSD Menu, Other Functions - DTV...................................................................

4.1 Digital TV System Cable Connections.................................................................

4.2 Integrated TV Screen Illustration..........................................................................

4.3 DTVATSC-USADigital TV Functions.............................................................

（）

26

27

30

31

32

33

34

35

36

38

40

41

1

2

19

20

4.4 DTV Mode Operation...........................................................................................

4.4.1 DTV Mode.........................................................................................................

4.4.2 ATSC Menu.......................................................................................................

4.4.3 DTV Mode Key Definitions................................................................................

4.5 Introduction to the ATSC Menu............................................................................

4.6 Auto Search Operation.........................................................................................

4.6.1 DTV Menu.........................................................................................................

4.6.2 Scan Window....................................................................................................

4.6.3 Channel Search Completed Window.................................................................

4.6.4 Channel Scan....................................................................................................

4.7 DTVDVB-T (European)Digital TV Functions.................................................

4.8 The System Setup Process..................................................................................

4.8.1 Country Setting.................................................................................................

4.8.2 Channel Search................................................................................................

4.8.3 ChannelSearchBlockDiagram.........................................................................

4.9 Other Notes..........................................................................................................

4.9.1 DVB-T Menu.....................................................................................................

4.9.2 Program Search................................................................................................

4.9.3 Parental Control................................................................................................

4.9.4 System Settings................................................................................................

4.9.5 Games...............................................................................................................

4.9.6 Accessory..........................................................................................................

4.9.7 Personal Style...................................................................................................

4.10 Setup Menu Navigation......................................................................................

（）

4.11 DVBTFrequency Table and Country List..........................................................-

43

44

45

47

48

50

54

57

58

59

60

61

62

1

CHAPTER 1

－CARDIO ACTIVE ENTERTAINMENT STATION

(INTEGRATED TV) FOR THE T652 TREADMILL

1.1 INSTALLATION MANUAL

No.

A1

A2

A4

A5

A6

Hardware Kit

Part Name Qty

1

Integrated TV module

Owner's manual

Lower cable(

TV lower power cord()

TV power adaptor

Adaptor power cord

Terminal plate

A3a)

A3b

A3

No.

A7

Part Name Qty

1

Coaxial cable splitter

2

1.2 INSTALLATION INSTRUCTIONS

Specification

Notes

Number

Components on the Product

Name

21

22

23

24

25

26

Inner hex screw

Spring washer

Serrated washer

Mushroom top Phillips screw

Zip tie

Phillips screw

Mushroom top Phillips screw

Phillips screw

Screwdriver bit and green handle

L-shaped Allen wrench

M11 open-end wrench

M6*L15

M6

D15*d6.5*t3.0

M5*P0.8*L12

M4*P0.7*L6

M5*0.8*L12

M4*P0.7*L6

Flat and Phillips

M5

M6

The CardioActive™ Entertainment Station is an integrated TV station for use on several

SportsArt Fitness products. Please follow instructions below to install this integrated TV

station on the T652 treadmill. Complete this installation before connecting the treadmill

and the TV module to power.

Note that throughout this manual, the words “left” and “right” are used in reference to

the product and its part. As such, these designations correspond to the left and right

sides of a person in position to operate this product. Also note that, for brevity, the word

screws is used where screws, washers, and other hardware may be involved.

Note: iPod is a trademark of Apple Inc., registered in the US and other countries.

Made for iPod” means that an electronic accessory has been designed to connect

specifically to iPod and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its compliance

with safety and regulatory standards.

Please note that SportsArt products use two types of boards for iPod® devices. One

board has audio-only functions. The other board has audio-video functions. Only the

audio-video board is suitable for use with the integrated TV module. Do not use the

audio-only board with the integrated TV module.

“

3

Qty

4

2

4

2

4

1

To access the motor compartment, remove covers as explained in steps (a) through (d)

below.

(a) Remove power cord screws. Remove the power cord.

(b) Remove covers at the base of the left and right pedestals. Loosen but do not

remove screws at the base of left and right pedestals.

Remove the caps in area (A). Loosen screws in that area. Remove screws in the

upper cover, and remove the upper cover (B). Then remove screws in the front

cover, and remove the front cover (C).

(d) Use wire cutters to cut away area (A) in the front cover.

(c)

4

STEP 1 Remove Covers

Install the adaptor and its cord as explained in steps (a) through (c) below.

a) Use screws (25) to secure the adaptor to the treadmill frame.(

(b) Note the original position of N and L wire connections on the power switch. Gently

compress the sides of the power switch and push the power switch outward, away

from the treadmill body.

Detach one wire between the filter and the power switch. From cable (A5), connect

the appropriate wire into the position of the wire you just removed. Detach the other

wire between the filter and the power switch. From cable (A5), connect the

appropriate wire into the position of the wire you just removed. After the wires are

connected securely, insert the power switch back into place as shown.

5

STEP 2 Install the Adapter

(b)

(a)

(c) Secure the ground wire of cable (A5) and the filter ground wire together as shown.

Insert the plug into the adaptor (A4) as shown.

6

(c)

STEP 2 Install the Adapter (Continued)

Cut out the cutaway in the display lower cover as explained in steps (a) through (b)

below.

(a) Remove screws from the lower cover.

(b) Peel off the sticker in the lower cover. Then cut out the cutaway in area (A) of the

display lower cover.

7

STEP 3 Remove the Cutaway

Disconnect the display upper cover as explained in steps (a) through (b).

(a) Disconnect cables on the display board as shown, and detach the display upper

cover.

(b) Cut the zip tie off the bracket for iPod. Disconnect the three cables as shown.

8

STEP 4 Detach the Display Upper Cover and Disconnect Cables

(b)

(a)

B

A

Install integrated TV module cables as explained in steps (a) through (d) below.

(a) First, remove screws in areas (A) and (B) on left and right pedestals.

(b) Slightly lift the handlebar assembly. Insert an L-shaped 5-mm Allen wrench into the

space in the left side of the handlebar assembly. This will prop up the handlebar

assembly, leaving space with which to direct cables on the left side.

9

STEP 5 Detach the Handlebar Cowling and Disconnect Cables

10

(c) Into the hole in the middle of the handlebar assembly, insert the plastic wrapped

end of cable (A3). Feed the cable toward the left side of the handlebar assembly.

When the lower end of cable (A3) nears the hole in the handlebar frame, feed

cable (A3)through the hole in the handlebar frame and into the pedestal.Stop

feeding cable (A3) downward when thelower end reaches the floor of the motor

compartment and the sticker on the cable meets your hand on the upper end.

(d) Finally, pull the lower end of cable (A3) out of the bottom of the pedestal. Feed the

cable (A3) into the motor compartment and secure it with zip ties (23) as shown.

Note: Secure the zip ties to the inner frame to avoid obstructing screw holes.

(c)

(d)

A

STEP 5

Detach the Handlebar Cowling and Disconnect Cables (Continued)

11

Install the TV cable terminal plate and cables as shown in steps (a) through (b) below.

(a) Before installing the cable terminal plate (A6), first select the metal terminal bracket

that belongs on this product. Then use screws (26) to secure the terminal plate onto

the metal bracket.

(b) Use an open-end wrench to secure cable (A3b) to the adapter (A4) cable. Connect

cable (a3a) to the integrated TV terminal plate (A6). Then use screws (24) to secure

the TV terminal plate bracket (A6) to the inside of the treadmill frame as shown.

Note: After connecting cable (A3b) to the adapter (A4) cable, push the plastic

sheath on cable (A3b) to completely cover the connection area. Use zip ties (23) to

secure the cable.

(a)

(b)

STEP 6 Install the TV Cable Terminal Plate

12

Installcovers, the pedestal, and the power cord as shown in steps (a) through (f) below.

a) First, remove the L-shaped Allen wrench from the handlebar assembly, and insert

the handlebar assembly into the pedestal.

(b) Secure screws that were removed previously, starting with area (A), then proceeding

to area (B).

Then secure the motor upper cover (D).

(

STEP 7 Install Motor Covers and the Power Cord

13

Secure pedestals and the power cord as shown in steps (d) through (f).

(d) Secure left and right pedestal screws.

(e) Install pedestal base covers on left and right sides.

(f) Finally, secure the power cord into place.

(e)

(d)

(f)

STEP 7 Install Motor Covers and the Power Cord (Continued)

14

Install the integrated TV module as shown in steps (a) through (f) below.

(a) Carefully

aim the TV module guide tubes through the holes in the display lower cover. At the

same time, feed integrated TV module cables through the hole.

(b) First secure screws (21) in area (A). Then secure screws in area (B). After securing

the TV module cables, carefully cut the zip tie to free the cables.

(a) Make sure that the ring is in place on the integrated TV screen neck.

STEP 8 Install the Integrated TV Module

15

(c) First, connect cable (L1) from the integrated TV module to cable (A3) from below.

Connect the CATV and DTV coaxial cables from the integrated TV module to the

output connectors on the coaxial cable splitter (A7). Connect the lower coaxial cable

to the input connector on the coaxial cable splitter. Use screws (22) to secure the

coaxial cable splitter (A7) into place. Use screw (22) to connect the ground wire

from the integrated TV module cable (L2) to the coaxial cable splitter (A7) as shown.

Loosen the cable clip screw on the coaxial cable splitter (A7). Collect cables in into

the clip, and secure its screw. (Note: Make sure that cables do not obstruct the

standoffs for display screws.)

(c)

STEP 8 Install the Integrated TV Module (Continued)

16

(d) Only carry out this step, (d), if the option kit for iPod is installed on this product. If

not, skip this step.Insert the integrated TV module cables (L2)into connectors on the

board foriPod.

(e) Insert integrated TV module cables (L3) into earphoneboardsas shown.

(f) Finally, connect display cables that were disconnected previously, and close the

upper cover onto the lower cover.

A

B

(f)

C

(e)

(d)

STEP 8 Install the Integrated TV Module (Continued)

17

Secure the integrated TV module neck cover as shown in steps (a) through (c).

(a) First remove screws from the integrated TV module neck cover. Then remove the

cover.

(b) Secure the display cover with the screws that were previously removed.

Make sure that the integrated TV module neck cover tucks neatly inside the treadmill

display top cover at area (A). Then use screws to secure the integrated TV neck

cover.

(c)

STEP 9 Secure Neck Covers

18

To secure the angle of the TV screen at its recommended position, follow instructions

on the sticker (inside the neck cover). To secure the TV screen angle at a different

position, follow steps (a) through (d) below.

(a) Remove the integrated TV module neck cover.

(b) Remove the screws at the lower left and right sides of the bracket. Loosen (but do

not remove) screws in position (A) until the angle of the TV screen can be adjusted.

(c) After adjusting the angle of the integrated TV screen, secure screws in area (A).

While aligning screw holes, secure other screws that were removed in step (b).

(d) Fit the integrated TV module neck cover to mesh inside the display top cover in area

(B). Then secure the integrated TV module neck cover with its screws.

STEP 10 TV Screen Angle Adjustment

Page is loading ...

SportsArt Fitness T631 User manual

This manual is also suitable for

SportsArt Fitness T631 User manual

Related papers

Other documents