Features:
50 BOTTLE WINE FRIDGE
Single temperature zone
5-18° temperature range
DUAL LAYERED
Dual Layered
Glass Door
Keeps the temperature inside
the cabinet stable and
condensation to a minimum.
ANTI-VIBRATION
Anti-vibration
Designed to keep your
wine in a
vibration-free environment
50 Bottle Capacity
Designed for the budding
wine enthusiast, this wine
fridge holds 50 standard 750ml
(Bordeaux-style) wine bottles.
CAPACITY
50
BOTTLE
Single Temperature Zone
Keeps your wine at the appropriate
serving temperature recommended
for sparkling (5–8ºC), white (9–14ºC)
or red wine (15–18ºC).
ZONE
ºC
SINGLE
TEMPERATURE
ZONE
ºC
Quick Set Up: Handle Installation
Model Number JC-145B1EQ
Colour Black/Stainless Steel
Temperature Range 5-18ºC
Capacity 50 Bottles
Warranty 3 Years
For more information
please visit www.stirlingappliances.com.au
or call 1300 886 649
Step 1
Before installing your wine fridge, read all safety instructions in the supplied manual, especially the
sections on electrical safety and installation.
The appliance must be installed to all electrical, plumbing, water and drain connections in accordance
with state and local codes. It is designed for built-in, recessed or free-standing installation.
The handle comes supplied with the necessary installation hardware in the plastic bag with the
instruction manual.
Open the fridge door and
gently lift the door gasket
at the area of the two
screw holes designated
for handle installation.
Step 2
Align the screw holes in
the handle with those in
the door frame, then insert
the screws and washers
from the inside and turn
clockwise to tighten.
Step 3
Replace the door gasket.
/