Vitek Transcendent 5 Series Quick start guide

Brand: Vitek

Model: Transcendent 5 Series

Category: Security cameras

Type: Quick start guide

This manual is also suitable for

VTC-TNB5TH

Vitek Transcendent 5 Series is a powerful and versatile surveillance camera that can be used for a variety of applications, including security, surveillance, and temperature measurement. With its high-resolution image sensor, powerful thermal imaging capabilities, and advanced analytics, the Vitek Transcendent 5 Series can provide you with the information you need to keep your property and people safe.

Some of the key features of the Vitek Transcendent 5 Series include:

5-megapixel image sensor for capturing high-resolution images
Thermal imaging capabilities for detecting heat signatures

Some of the key features of the Vitek Transcendent 5 Series include:

5-megapixel image sensor for capturing high-resolution images
Thermal imaging capabilities for detecting heat signatures

VITEK

VTC-TNB5TH

VT-BB501

Transcendent Series 5 MegaPixel

Bi-Spectrum Long-Range Thermal

WDR IP Motorized Bullet Camera

QUICK START GUIDE

FEATURES - VISIBLE LIGHT

• 1/2.7” 5.0 Megapixel CMOS Image Sensor

• 5MP (2592 × 1944) @30 fps

• 8mm @ F2.0 Fixed Iris Lens (1/30s ~ 1/100000s)

• Field of View - 38°×27.5°(H×V)

• Captures 30 Faces Simultaneously

• Built-In White Light and Loudspeaker

• 120Db True Wide Dynamic Range (WDR)

• XD-DNR (3D & 2D Digital Noise Reduction)

• BLC, HLC, De-Fog

FEATURES - THERMAL LIGHT

• 17um 384×288 Vanadium Oxide Uncooled Focal Plane Detector

• Noise Equivalen Temp. Difference (NETD): <35mK(@25°C, F#=1.0)

• S12.3mm@F1 Thermal Imaging Lens

• 29.7°×22.5°(H × V)

• Minimum Focus Distance: 4’5” (1.34m)

• Temperature Measuring Distance 6’6”~20’ (2~6m)

• Black, White, Pseudo-color

GENERAL FEATURES

• Fully Programmable Gen. III Advanced Analytics: Face Detection, Target Counting,

Intrusion, Region Entrance / Exit, Line Crossing, Scene Change, Video Blur

• H.265/H.264/MJPEG

• Remote Viewing via CMS, Internet Explorer, iOS & Android Apps

• MicroSD Card Slot for Local Recording (256GB)

• Sound and Light Warning

• 1 Ch. Audio In + 1 Ch. Audio Out

• 1 Ch. Alarm Input + 1 Ch. Alarm Output

• ONVIF Compliant

• IP66 Weather Resistance

• 12VDC & PoE (Power over Ethernet) Operation

• Ceiling or Wall Mounting Feasability with Included Mount (Other Accessories Sold

Separately - See Following Page)

• 2-Year Warranty

*Please research local, state and federal laws regarding the implementation of audio surveillance.

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are

available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

PLUS

VT-BB501 - Black Body Temperature

Calibration Device (sold separately)

2 3

Camera Components and Accessories

.98”/25mm

.20”/5mm

.20”/10mm

Camera Overview

Allen Key

Tripod

Adapter

Plate

Weather Resistant Network Coupler

1. Loosen the nut from the Weather Resistant Network Coupler,

2. Run ethernet cable through coupler, then attach a RJ-45 connector.

3. Tighten the nut and coupler for a weather resistant seal.

Connecting Alarm Input / Output

Camera Installation

Install SD Card

1. Remove the MicroSD card slot cover.

2. Insert a MicroSD card.

3. Check if the water-resistant ring is

installed properly before re-installing the slot

cover. Tighten screws firmly.

Wall or Ceiling Mounting: Make sure the wall or ceiling can support 3X the

device’s weight. Install in dry conditions, free of dust and debris.

2.54”

.2” / 5mm

1. Drill the screw holes and the

cable hole on the wall according to

the drill template.

2. Route the cables and connect the relevant cables.

3. Fasten the mounting base to the wall/ceiling with

the screws provided.

4 5

4. BRACKET ADJUSTMENT.

Before adjustment, preview the image

of the camera on a monitor and loosen

the fixed screws to adjust the view

angle of the camera. After that, tighten

the fixed screws.

VTC-TNB5TH Camera Installation with Tripod

1. Screw the adapter onto the tripod (sold separately from camera).

2. Route and connect cables. Align the holes of the mounting base with the holes (b) of the

adapter. Attach the camera to the adapter with the screws provided.

VT-BB501 Blackbody Installation with Tripod

1. Align the holes of the blackbody with the holes of the adapter as shown below. Then fasten

the blackbody to the adapter with screws.

2. Screw the adapter with the black body onto the tripod (sold separately from blackbody).

Installation and Use Requirements (See Diagram on Next Page)

- In order to ensure accuracy in temp. measurement, the recomended ambient temp. is

50~95°F (10~35°C), and the infrared light should be turned off during temp. measurement.

- The VTC-TNB5TH can be used independently, but will provide greater accuracy when used

with the blackbody callibration device, VT-BB501 (sold separately).

- The VTC-TNB5TH should be used in a stable, wind-free indoor environment. Make sure the

monitoring field is far away from any objects that could produce airflow, high temp. or reflection.

- Avoid installation near a door or an air conditioner, or any place in direct sunshine.

- The recommended monitoring distance is 2~6m 6’7”~19’8”. To monitor an aisle, the best

temperature measurement distance is 6’7”~13’9” (2~4M).

- Set up a 1-way temp. measuring zone and make sure the camera can clearly see subjects’

faces.

- The VTC-TNB5TH requires 20-30 minutes after powering up to give steady readings.

- It is recommended to use DC 12V power supply to reduce power consumption.

- If the VT-BB501 is used with the camera, it should be installed 6’7”~9’9” (2-3M) away from

the camera. It cannot be blocked. During operation, do not move the camera or black body

callibration device, and make sure the VT-BB501 is positioned in a proper place within

the camera image.

6 7

Ideal Temperature Measurement Range

0-6’7”

6’7”-13’4”

13’4”-19’8”

6’7”-9’9”

*Always keep VT-BB501 within view

of VTC-TNB5TH

50~95°F

(10~35°C)

Steps for Setting Temp. Measurement Are as Follows:

LAN Configuration

The camera can be accessed on the local network either using the

IP-Tool or directly in a web browser.

Accessing the Camera Using the IP-Tool

1. Make sure the camera and PC are connected to the LAN.

2. Locate the IP-Tool installer at www.

vitekcctv.com/Downloads/Soft-

ware/Transcendent-IPTool_v2.0.2.zip

, then install on the PC. Open

the installed application.

3. Modify the IP address. The default IP address is 192.168.226.201.

Click the information of the camera listed in the above table to show

the network information on the right side. Modify the IP address and

gateway of the camera and make sure its network address is in the

same local network segment as the computer’s. Please modify the

IP address of your device according to the practical situation.

For example, the IP address of your computer

is 192.168.13.4. So the IP address of the

camera shall be changed to 192.168.13.X.

After modification, please input the password

of the administrator and click “Modify” button

to modify the setting.

** Default admin password: “123456".

LAN Configuration

The camera can be accessed on the local network either using the

IP-Tool or directly in a web browser.

Accessing the Camera Using the IP-Tool

1. Make sure the camera and PC are connected to the LAN.

2. Locate the IP-Tool installer at www.

vitekcctv.com/Downloads/Soft-

ware/Transcendent-IPTool_v2.0.2.zip

, then install on the PC. Open

the installed application.

3. Modify the IP address. The default IP address is 192.168.226.201.

Click the information of the camera listed in the above table to show

the network information on the right side. Modify the IP address and

gateway of the camera and make sure its network address is in the

same local network segment as the computer’s. Please modify the

IP address of your device according to the practical situation.

For example, the IP address of your computer

is 192.168.13.4. So the IP address of the

camera shall be changed to 192.168.13.X.

After modification, please input the password

of the administrator and click “Modify” button

to modify the setting.

** Default admin password: “123456".

8 9

4. Double-click the IP address and then the system will pop up the web

browser to connect IP-CAM . IE browser will download the Active X

control. After downloading, a login window will pop up as shown

below:

Input the user name and password to log in.

Default user name: admin / Default password: 123456.

Directly Access Through a Web Browser

The default network settings are as shown below:

IP address: 192.168.226.201 HTTP: 80

Subnet Mask: 255.255.255.0 Data Port: 9008

Gateway: 192.168.226.1

You may use the above default settings when you log in the camera for

the first time.

1. Manually set the IP address of the PC. The network segment should

be the same as the default settings of IP-CAM. Open the network

and share center. Click “Local Area Connection” to pop up the

following window.

Select “Properties” and then select Internet protocol according to the

actual situation (for example: IPV4). Next, click “Properties” button to

set the network of the PC.

2. Open the IE Browser and input the default address of IP-CAM and

confirm. The IE browser will download Active X control.

3. After downloading Active X control, the login dialog box will pop up.

4. Input the default username and password and then enter to view.

WAN Configuration

Access the camera by the router or virtual server for example.

1. Make sure the camera is connected to the LAN; Then log into the

camera via LAN and go to System Congfig→Network Config→Port

menu to set up the port number.

2. Enter System Config→Network Config→IP Address menu to modify

the IP address.

4. Open the web browser and input its WAN IP and HTTP port to

access the IP-CAM.

3. Go to the router’s management interface through IE browser to

forward the IP address and port of IP-CAM in the “Virtual Server”.

10 11

Enable Face Detection

Click Config>Event>Face Detection to go to the Face Detection

Settings Interface. Check “Enable” to enable the function. For more

detailed settings / instructions, please refer to the use manual.

Temperature Measurement Settings

Click Config>Temperature>Temperature Measurement to go to the

temperature measurement settings interface.

1. Enable “Temperature Measurement”, select Celcius or Farenheit

termperature as needed, then set the high and low temp. threshold.

2. Set the alarm

holding time and

the alarm trigger

options.

3. Click “Save” to

save the settings.

Temperature Calibration Settings

Click Config>Temperature>Temperature Calibration to go to the

following interface.

Please enter the ambient temperature and humidity accordingly.

Object Distance: The acutal distance between the camera and subject.

Emissivity: For human skin, this value is normally set at 95%.

Without VT-BB501 BlackBody Callibration Device

Blackbody: select “Close”

Temperature Correction Value = Thermometer Measurement

Temperature minus (-) Thermal Measurement Temperature.

After calibrating and saving the settings, it will take about 10 mins. for

the camera to be steady.

With VT-BB501 BlackBody Callibration Device

Blackbody: select “Open”.

Blackbody Temperature: Recommended

to set at “95

°F” / “35°C” here.

Click the blackbody image and then “Save”.

The system will correct the temperature

automatically. After saving, it will take

about 5 minutes for the camera to be steady.

Blackbody Temperature Setting

Turn on the blackbody and then press “Up”

or “Down” to increase or decrease the

temperature value. It will take 20-30 minutes

for the blackbody to be steady.

12 13

Detailed Specifications (V) = Visible Light, (T) = Thermal VTC-TNB5TH

Image Sensor (V)

Image Size (V)

Resolution (V)

Min. Illumination (V)

Lens (V)

Electronic Shutter (V)

Additonal Features (V)

Video Compression

H.264 Compression Stndrd.

Audio Compression

Region Of Interest

Main-Stream (T)

Main-Stream (V)

Sub Stream (T)

Sub Stream (V)

3rd Stream (V)

Bit Rate / Type

Wide Dynamic Range (V)

Digital Noise Reduction (V)

Field of View (V)

Field of View (T)

Resolution (T)

Temp. Measurement (Max 30.

People Simultaneously)

Temperature Alarm

Detector Type (T)

Noise Equivalent Temperature

Difference (T)

Lens (T)

Iris Type (T)

Min. Focus Distance (T)

Temp. Measuring Distance (T)

IR Type / Range

1/2.7” 5.0 Megapixel CMOS Image Sensor

5 MegaPixel (2592 × 1944)

5MP(2592×1944), 4MP(2592×1520), 2K(2560×1440), 3MP(2304× 1296),

1080P(1920×1080), 720P(1280×720), D1, CIF, 480×2400.0125 [email protected],AGC

ON; 0 lux with IR0.0045 [email protected],AGC ON; 0 lux with IR

[email protected]

1 / 30s 1 / 30 s ~ 1 / 100000 s

Backlight, Hightlight Compensation, Defog, Built-in White Light and Loudspeaker, Sound / Light Warning

H.265, H.264, MJPEG

Baseline Profile / Main Profile / High Profile

G.711A / G.711U

8 regions; each ROI to be configured separately

60Hz: 384 × 288 (1~30fps), 50Hz: 384 × 288 (1~25fps)

60Hz: 5MP/4MP/2K/3MP/1080P/720P (1~30fps),

50Hz: 5MP/4MP/2K/3MP/1080P/720P (1~25fps)

Thermal : 60Hz: 384 × 288 (1~30fps), 50Hz: 384 × 288 (1~25fps)

60Hz: 720P/D1/CIF (1~30fps), 50Hz: 720P/D1/CIF (1~25fps)

60Hz: D1/CIF/480 × 240(1~30fps), 50Hz: D1/CIF/480 × 240(1~25fps)

64 Kbps ~ 7 Mbps / VBR + CBR

120dB

XD-DNR (3D & 2D-DNR)

38° × 27.5°(H × V)

29.7° × 22.5°(H × V)

384 × 288

±0.5°C@(86°F~107.6°F / 30°C~42°C, without black body)

±0.3°C@(86°F~107.6°F / 30°C~42°C, with black body)

High Temperature, Low Temperature, Temperature Exception

17um Vanadium Oxide Uncooled Focal Plane Detector

(NETD) <35mK(@25°C, F#=1.0)

[email protected]

Fixed Iris

52.76” / 4’5” (1.34m)

6’6”~20’ (2~6m)

White Light / Up to 100’

Detailed Specifications - CONTINUED VTC-TNB5TH

Gen. III Advanced Analytics

Image Setting

Alarm

Smart Alarm

General Functions

Network

Hardware Reset

Audio

Local Storage

Remote View (Supported

Browsers)

Interface Protocol

Weather Resistance

Power Input / Consumption

Working Environment

Weight / Dimensions

Temperature Range

Radiation Area Size

Temperature Resolution

Temperature Accuracy

Temperature Stability

Effective Emissivity

Working Environment

Dimensions

Power Consumption

Power

Weight

Face Detection, Target Counting, Intrusion, Region

Entrance / Exit, Line Crossing, Scene Change, Video Blur

ROI, Saturation, Brightness, Chroma, Contrast,

Sharpen, NR; Adjustable through client software or browser

1 Ch. Alarm In + 1 Ch. Alarm Out

Motion Detection, SD Card Error / Full, IP Conflict, Cable Connection

Watermark, IP Address Filtering, Video Mask, Heartbeat, Password Protection,

Non-Photosensitive Switch, Image Distortion Correctio

RJ45

Yes

1 Ch. Audio In + 1 Ch. Audio Out*

Built-in Micro SD card slot up to 256GB

CMS / Web Browser / Mobile (iOS/Android), IE, Chrome and Firefox w/ IE Tab

ONVIF

IP66

12VDC / PoE, <9W

50~95°F (10~35°C) (Windless) / < 95% Humidity

41.62oz. / 2.60lbs. / 1.18kg 10.96 × 3.95 × 3.49” (278.3 × 100.2 × 88.7mm)

VT-BB501 SPECS

41~122° F / +5.0~50°C adjustable

2.76 x 2.76” / 70 x70mm

0.1°C

±0.1°C(@40°C)

±(0.1~0.2) °C/30min

0.97±0.02

32~104°F / 0~40°C

4.72 x 5.00 x 7.05” / 120x 127x179mm

≤35W

AC 110V~220V

2.49lb / 39.86 / 1.13KG

*Please research local, state and federal laws regarding the use of

audio surveillance.

14 15

THE VITEK VT-TNR818PTH:

8 Channel NVR with Smart Thermal and

Temperature Measuring Camera

Management Integration!

VT-BB501

Black Body

Temp. Calibration

Device

VT-TRPT

Tripod for use with

VTC-TNB5TH and

VT-BB501

OPTIONAL ACCESSORIES

AND RELATED PRODUCTS

(SOLD SEPARATELY)

VT-TJB01-W

Optional Junction

Box for Use with Select

Transcendent Bullet

Cameras - White

VT-TPLMT - W

Transcendent

Universal Pole

Mount - White

VT-TCNMT - W

Transcendent

Universal

Corner Mount -

White

Also Consider Vitek Temperature Screening

Face Panel, VT-TSP8!

Transcendent Series 2MP Temperature

Screening Camera with 8-inch Display Panel

*Shown with

VT-TDBTH -

Desktop bracket for

face panel

• High Accuracy Zero-Contact Infrared

Body Temperature Measurement

(with or without masks)!

• 32~122°F with ± 0.3°F Accuracy

Temperature Measuring Range

• Temperation Measuring Distance 12”

~ 18” (0.3~0.5m)

• Face Recognition Distance 1’ ~ 6.5’

(0.3m-2m)

• MicroSD memory slot for Local

recording up to 256GB MicroSDXC

card

*Shown with

VT-TPBTH -

Post mount for

use with

turnstile

*Shown with

VT-TFLBTH -

Stand-on-ground

type bracket

for face panel

16 PB

LIMITED PRODUCT

WARRANTY

This VITEK product carries a two (2) year limited warranty. VITEK

warrants to the purchaser that products manufactured by VITEK are free

of any rightful claim of infringement or the like, and when used in the

manner intended, will be free of defects in materials and workmanship for

a period of two (2) years, or as otherwise stated above, from the date of

purchase by the end user. This warranty is nontransferable and extends

only to the original buyer or end user customer of a VITEK Authorized

Reseller.

The product must have been used only for its intended purpose, and

not been subjected to damage by misuse, willful or accidental damage,

caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the

guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM

Version 1.0

July 2020

CLASS A DIGITAL DEVICE (INDUSTRIAL & COMMERCIAL ENVIRONMENT)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to CE and FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harm-

ful interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct

Vitek Transcendent 5 Series Quick start guide

Brand: Vitek

Model: Transcendent 5 Series

Category: Security cameras

Type: Quick start guide

This manual is also suitable for

VTC-TNB5TH

Some of the key features of the Vitek Transcendent 5 Series include:

5-megapixel image sensor for capturing high-resolution images
Thermal imaging capabilities for detecting heat signatures

Download PDF

report

Vitek Transcendent 5 Series Quick start guide

This manual is also suitable for

Vitek Transcendent 5 Series Quick start guide

Related papers

Other documents