Blues car audio BX-69 Owner's manual

Type
Owner's manual

This manual is also suitable for

BLUES CAR AUDIO
BX-52
BX-65
BX-57
BX-69
BC-65 Component
OWNER’S MANUAL
Please read through this manual to familiarize yourself with your new
speakers. Should your Blues Speakers ever require service, you will
need to have the original dated receipt.
INTRODUCTION
Thank you for purchasing this Blues speakers system. Whether you are replacing or upgrading
your vehicles factory speakers your new Blues speakers, when used as described, will deliver
great sound and provide years of dependable service in your car, truck, RV or mini-van. We have
taken numerous measures in quality control to ensure that your product arrives in top condition,
and will perform to your satisfaction. Before installing please take a few moments to read through
this owner’s manual as it contains technical data plus installation tips to help you get the most out
of your speakers.
Should you have questions or concerns on how to install or wire your speakers please call us at:
Customer Service
Monday – Friday
Tel (909) 930-1338
8:30am – 5:30pm PST
CAR AUDIO
www.bluesaudiousa.com
©2013
HIGHLIGHTED FEATURES
• Black high gloss, warp-resistant, low-resonance steel baskets sized for OEM fit in most vehicles
• Low distortion polypropylene coated woofer cones for improved low end response and weather
resistance
• Balanced output Mylar Tweeters for improved high frequency response
• Double pressed foam rubber surrounds for increased sensitivity and better linearity
• Computer optimized FEA Motor Structure for maximum efficiency and increased power handling
• Metal mesh grills included on select models
PREPARATION
Here is a short list of guidelines to review prior to installation
• Ensure the speakers will fit in the factory location, double check the mounting depth of the
speakers. Make sure the speaker will not interfere with window mechanics, door handles
and window handles.
• The back of the speaker magnet should not touch any part of the vehicle
• If using the provided Blues mesh grills, be sure mounting location is sufficient distance from
door and/or window handles
• Check all safety regulations by reviewing your vehicle’s owner’s manual
REQUIRED TOOLS
The following is a list of tools need for installation
• Screw drivers
• Battery post wrench
• Hand held drill and bits
• Wire cutter
• Wire stripper
• Crimping tool
• Electrical tape
• Safety glasses (protective eyewear)
Step 1. Remove existing speaker
Step 2. Position new speaker and align
with existing mounting holes
Step 3. Attach positive (+) and negative (-)
speaker terminals. Be sure to observe proper
polarity when connecting the wires.
Step 4. If not using the factory grill, attach the Blues
mesh grill as shown above
Step 5. Mount speaker (save and use the original factory
hardware when possible)
BASIC INSTALLATION STEPS
Rear deck mounting
Door mounting
To radio or amplifier
To radio or amplifier
BX52/BX62
/BC65
BX57/BX69
INSTALLATION EXAMPLES
Your Blues coaxial speakers are designed as direct replacements for stock factory speakers.
Some basic installation examples are shown below.
For custom installations seek professional help from a car audio/electronics dealer.
CAUTION
Before installing these speakers, check the vehicle’s manual for location of important
vehicle equipment such as airbags, CO
2
systems, fuel systems, and electrical systems
in the vehicle. Accidental deployment of air bags may result in serious injury.
Model BX-52 BX-65 BX-57 BX-69
Size/Type
(in/mm)
5.25" (130mm) 6.5" (165mm) 5x7"
(126x180mm)
6x9"
(152x230mm)
Continuous Power
Handling (watts)
50W 60W 60W 70W
Peak Power
(watts)
200W 240W 240W 280W
Frequency Response
(Hz)
127Hz~20kHz 94Hz~20kHz 79Hz~20kHz 78Hz~20kHz
Nominal Impedance
(ohms)
4 ohms 4 ohms 4 ohms 4 ohms
Sensitivity
(1 watt/ 1 meter)
85.5db 87.8db 87.6db 88.2db
External Diameter
(in/mm)
5.47"/129.5mm 6.5"/165mm 7.56"/192mm x
5.51"/140mm
9.21"/234mm x
6.38"/162mm
Mounting Hole
Diameter (in/mm)
4.53"/115mm 5.68"/144.3mm 7.11"/180.5mm x
5"/127mm
8.68"/221mm x
5.91"/150mm
Top Mount Depth
(in/mm)
1.79"/45.5mm 2.05"/52mm 2.07"/52.5mm 2.89"/73.5mm
Bottom Mount
Depth (in/mm)
1.97"/49.5mm 2.28"/58mm 2.44"/62mm 3.16"/80.2mm
Tweeter Protrusion
(in/mm)
0.24"/6.1mm 0.35"/8.8 0.17"/4.3mm 0.45"/11.4mm
Mounting Height
(in/mm)
0.30"/7.6mm 0.58"/14.8 0.54"/13.8 0.71"/18.1mm
Grills Included
Yes Yes No Yes
SPECIFICATIONS FOR BLUES COAXIAL SPEAKERS
Due to continuing improvements, these specifications are subject to change without any notice.
Model
BC-65 Mid BC-65 Tweeter
Size/Type
(in/mm)
6.5” (165mm) Mid 1” (25mm) Tweeter
Continuous Power
Handling (watts)
60W* 60W*
Peak Power
(watts)
240W 240W
Frequency Response
(Hz)
94Hz~20kHz 2.5k~20KHz
Nominal Impedance
(ohms)
4 ohms 4 ohms
Sensitivity
(1 watt/ 1 meter)
87.8db N/A
External Diameter
(in/mm)
6.5"/165mm 2"/51mm
Mounting Hole
Diameter (in/mm)
5.68"/144.3mm 1.79"/45.6mm
Top Mount Depth
(in/mm)
2.05"/52mm 0.77"/19.5mm
Bottom Mount
Depth (in/mm)
2.28"/58mm N/A
Tweeter Protrusion
(in/mm)
N/A N/A
Mounting Height
(in/mm)
N/A 0.24"/6mm
Grills Included
Yes N/A
SPECIFICATIONS FOR BLUES BC65 COMPONENTS
* Continuous power handling when Crossover Network installed
SPEAKER DIMENSIONS
LIMITED WARRANTY POLICY
Blues Audio USA, Inc. offers limited warranty on Blues products under normal use on the
following terms:
Blues Audio USA Speakers are to be free of defects in material and workmanship for a period of one
(1) year.
This warranty applies only to Blues products sold to consumers by Authorized Blues Audio Dealers
in the United States of America. Products purchased by consumers from a Blues Audio dealer in
another country are covered only by that country’s Distributor and not by Blues Audio USA.
This warranty covers only the original purchaser of Blues Audio product. In order to receive service,
the purchaser must provide Blues with the receipt stating the consumer name, dealer, product and
date of purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product
deemed to be equivalent) at Blues discretion and will not be liable for incidental or consequential
damages. Blues Audio will not warranty this product under the following situations:
• Speakers received with bent frames or liquid damage
• Abuse such as holes in the cone, surround or ripped spider
• Voice coil damage due to amplier clipping or distortion
• Product that has not been installed according to this owner’s manual
Any implied warranties including warranties of fitness for use and merchantability are limited in
duration to the period of the express warranty set forth above. Some states do not allow limitations on
the length of an implied warranty, so this limitation may not apply. No person is authorized to assume
for Blues Audio any other liability in connection with the sale of this product.
Please call (909) 930-1338 for Blues Audio Customer Service. You must obtain an RA# (Return
Authorization Number) to return any product to Blues. The RA number must be prominently marked
on the outside of the shipping carton or the delivery will be refused. Please pack your return carefully;
we are not responsible for items damaged in shipping. Return the defective product along with a
copy of the original dated retail sales receipt, plus $12.00 for handling and diagnostic evaluation to:
Blues Audio USA, Inc., Attn: Returns (RA#__________)
2133 S. Green Privado, Ontario, California 91761
Residents of HI and AK will be charged for return shipping. All inquiries regarding service and
warranty should be sent to the above address.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Blues car audio BX-69 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI