Elsea compact Instruction and Maintenance Manual

Brand: Elsea

Model: compact

Type: Instruction and Maintenance Manual

This manual is also suitable for

Elsea ZLA40C is a compact and versatile floor cleaning machine designed for effective cleaning and drying of various floor surfaces. Its features include:

Interchangeable brush system with a 360 mm cleaning width, allowing for efficient dirt removal.
Powerful suction motor for thorough liquid pickup, leaving floors dry and clean.
Manual advance system for precise maneuverability and control during operation.
Durable construction with a stainless steel brush plate and chassis body, ensuring longevity and reliability.
Convenient solution and waste tank capacities of 35 and 45 liters respectively, minimizing the need for frequent refilling and emptying.

Elsea ZLA40C is a compact and versatile floor cleaning machine designed for effective cleaning and drying of various floor surfaces. Its features include:

Interchangeable brush system with a 360 mm cleaning width, allowing for efficient dirt removal.
Powerful suction motor for thorough liquid pickup, leaving floors dry and clean.
Manual advance system for precise maneuverability and control during operation.
Durable construction with a stainless steel brush plate and chassis body, ensuring longevity and reliability.
Convenient solution and waste tank capacities of 35 and 45 liters respectively, minimizing the need for frequent refilling and emptying.

INSTRUCTION AND MAINTENANCE MANUAL

WASH/DRYER FLOOR CLEANER

ZLA40 – ZLA40C – ZLA40CB

To obtain best results,always use original ELSEA s.r.l. parts.

All logos and headings in this manual belong soley to the registered company.

• Model : COMPACT

• Registered: __________

• Year of manufacture: __________

• Review: 0.0

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

SUMMARY

1. DESCRIPTION OF THE MACHINE................................................................ 3

2. TECHNICAL CHARACTERISTICS..................................................................4

3. SAFETY INFORMATION.................................................................................5

4. USE OF THE MACHINE................................................................................. 6

5. MOVING THE PACKING.................................................................................7

6. UNPACKING THE MACHINE......................................................................... 7

7. PREPARING THE MACHINE FOR SERVICE................................................ 8

8. PUTTING THE MACHINE INTO SERVICE...................................................20

9. WORKING PROCEEDURE...........................................................................27

10. PROCEEDURE AT THE END OF WORK...................................................28

11. SAFETY PROCEEDURES.......................................................................... 28

12. MAINTENANCE.......................................................................................... 29

13. PUTTING THE MACHINE OUT OF SERVICE...........................................31

14. CONTRA-INDICATION IN THE USE OF THE MACHINE.......................... 31

15. DESCRIPTION OF ANOMALIES IN THE MACHINE .................................33

16. ELECTRICS DIAGRAM .............................................................................. 34

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

PRESENTATION

Dear client,

ELSEA s.r.l. would like to thank you for choosing the

WASH/DRYER Mod. ZLA40 – ZLA40C – ZLA40CB the new and

compact wash/dryer, who,s characteristics we are sure will fullfill

your working needs.

WASH/DRYER Mod. ZLA40 – ZLA40C – ZLA40CB has been

designed and built in total line with the directive 459/96, with

premium quality materials and the maximum of reasearch to reduce

the risk of breakdowns.

This manual has been written to minimise the risk of injury to the

operator and also to teach the operator the correct use of the

machine ,its functions and its long life.

Before use, we suggest that the user fully reads the manual, and to

scrupulously keep to the instructions contained there in For safety

reasons do not try any kind of operation not specifically mentioned in

the manual. Leader2000 is availiable for any clarification required by

its clients.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

1. DESCRIPTION OF THE MACHINE

The constant research applied to wash/dry machines has enabled ELSEA S.r.l. to realise

WASH/DRYER Mod.Nimbus, a type of wash/dryer, extremely versatile and manageable,

with compact dimensions perfect for your place of work, cleaning your floor surfaces

perfectly, with optimum suction of liquids and simple to use.

The machine has been given an interchangeable brush, level to 360mm assembled on a plate

of completely stainless steel, the machine has also been built on a “chassis body”, that is a

bearing tank that acts as a chassis, to which all the components are fastened ( the wheel axis,

suction motor, and the brush plate).

This solution has allowed us to obtain certainly, a reliable working machine for our time,

with unique characteristics in the market, these characters are its simplicity function and

strength and above all low maintenance, light and practical, with asthetic beauty.

Also, the best design of the dryer (squeegee) and its particular collaboration with the brush

has allowed to obtain the perfect suction, of all detergent liquid onthe floos surface.

WASH/DRYER Mod. ZLA40 – ZLA40C – ZLA40CB has been dsigned and

built in line with electrics ruling EN60335-1.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

2. TECHNICAL CHARACTERISTICS

2.1. Weight and dimensions

• Width ………………………………………………………. mm 400

• Height………………………………………………………………. mm 1060

• Height of handlebars ……………………………………….…. mm 1000

• Length …………………………………………………………… mm 1060

• Width of cleaning zone ………………………………………….. mm 360

• Brush diameter …….………………………………………… mm 350

• Weight at empty ( without battery and empty tank) ……………………Kg 48

• Total weight ( with battery and full detergent tank)………. Kg 122

• Battey weight ………………………………………………………... Kg 40

2.2. Electrics

• Power source………………………………………………………… battery

• suggested battery …………………………………………………2 x 12 V 60 Ah cycle

• Voltage: ……………………………………………. 24 Volts

• power frequency: …………………………………………... direct current

• Total electric power: ……………………………………… 0,700 kW

• brush motor: ……………………………………………………… 200 W, 24 V CC

• suction motor: …………………………………………………… 480 W, 24 V CC

2.3. General characteristics

• Type of advance…………………………………..………….. manual

• Maximum tilt at full weight……..………………………….. 2%

• Capacity of work area ………………………………………………. 1800 mq/h

• Brush rotation speed ………………………………………… 180 revs/min

• Brush pressure ………………………………………. 240 N (25 Kg)

• Suction pressure ( empty level) ……………………13,50Kpa (1450 mm/H

• Solution tank capacity ……………………………….. 35 litres

• Waste tank capacity ………………………………………… 45 litres

• Acoustic level …………………………………. ≤ 66 dB

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

3. SAFETY INFORMATION

In consideration of the safety rules of the machine directive 459/96, and electric rules En

60335-1 e 60335-2, and of D.Lgs. 81/08 ( safety only text) the machine type

WASH/DRYER Mod. ZLA40 – ZLA40C – ZLA40CB adheres to the minimum

required safety features.

In particular the machine is built with the following technical features to protect the operator

in its use and maintenance.

• All moving parts ,mechanical or not,are protected by guards with hexagonal sunken

screws.

• The start ( which puts the suction and brush motors in motion) can be exclusively done by

using :I / O of the general ignition, situated on the control panel of the machine ( general

power to all the circuit), and successively pressing the button START to operate the

motors singly ( brush rotation,suction).

• On the contrary, it is possible for the operator in an emergency, to stop the machine at

any moment by using the same button I /O.

• Whatever operation, brush plate, suction motor, battery chamber, must always be done

with the machine switched OFF.

• Labels of danger and caution are placed in certain areas, if these ares are not respected,

you are putting yourself at risk.

3.1. CAUTION

1. ELSEA s.r.l. DOES NOT ACCEPT ANY RESPONSIBILITY OR MACHINE

GUARANTEE in the case of modifications, infringements or contrivance, however

small, and which ever part, the aqquired product is used for any thing it was not built

to do.

The machine has been built to top grade to satisfy the market in quality and

production.

All materials and components used in its making satisfy the safety rules CEE and

ELSEA s.r.l. hold the respective certification.

2. Only use brushes given with the machine, or those specified in the instruction

manual, Using other brushes could compromise the safety of the machine.

3.2. ATTENTION

1. this machine is not adapted to vaccum dangerous dust,debris.

2. Do not use the machine on a tilt more than suggested in the manual.

3. The machine must only be used by trained persons.

4. The machine must be disconnected from its power source ( cable if mains electric, or

its battery during cleaning or maintenance and during exchange of parts.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

5. Use adequate protection ( gloves) during contact with liquid detergent and during the

change of brush.

6. All accidental splash of detergent in the eyes must be washed out thoughroughly with

plenty of water and medical help sought.

7. Handle the battery with care, all accidental contact of battery fluid with the eyes or

sensitive parts of the body must be quickly washed out with plenty of running water

and medical help sought, use gloves and goggles.

8. Do not disperse battery fluid into the environment.

4. USE OF THE MACHINE

The floor washing machine, WASH/DRYER Mod. ZLA40 – ZLA40C –

ZLA40CB HAS BEEN BUILT ONLY AND EXCUSIVELY FOR THE CLEANING OF

FLOORS, USING A MECHANICAL ROTATING BRUSH ACTION,and a chemical action

of water and detergent solution.

Also, during its advance motion, the dirt removed and the detergent solution on the floor

come collected via a suction motor ( dryer or squeegee) which, through tubes, passes the

said liquid into a waste tank.

Every other use is considered inappropriate and consequently dangerous, if the safety rules

are not followed with this machine it could result in damage to the machine and its operator.

Every operation of maintenance, repair, brush change, etc, must be done with the electrics

sectioned.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

5. MOVING THE PACKING

The machine is delivered direct from the factory,mounted on a europallet.

The europallet must be moved using a fork lift truck.

CAUTION: Absolutely avoid stopping whilst moving the machine in its packing state.

No part of the machine is designed to take any weight.. therefore, not for any reason must

any raising hooks be placed on the machine. If the machine falls during lifting it could cause

grave damage to peronnel and itself .

6. UNPACKING THE MACHINE

Now the machine has to be unpacked.

Proceed as follows:

1. remove external packing, the machine will be fixed to the pallet base with steel straps.

2. Remove steel straps and fixings.

3. Tilting the pallet back gently, allow the machine to slowly roll off,keeping hold .

4. retain the steel straps and fixing bolts for any future re packing.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

7. PREPARING THE MACHINE FOR SERVICE

Before putting the machine into service,follow these pointers:

• First thing, check the machine has not been damaged, in particular,all external parts are

intact.

• The packing contains all the components (squeegee, brush , instruction manual, spare

parts catalogue, guarantee.)

In the unlikely case of damage, problems or missing parts, do not proceed with assembly,but

call the selling agent or directly to ELSEA.

7.1. Preliminary operations

7.1.1. Dryer (squeegee)

The squeegee is fixed directly behind the brush, in a “hugging” manner .

Fig 1

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Insert the suction tube in the opposite pipe, carefully rotating to one side the squeegee in

order to fit correctly.

There is no need to fix the squeegees raising cable, as this always works directly on the

support.

Fig 2

7.1.2. Assembly and charge of battery

The battery chamber is accessible at the back of the machine, and is found directly on the

waste tank, this permits easy maintenance of the battery, and much safer.

To install the battery for the first time, or to change, proceed as follows ( note: every single

detail is explained and shown in photos in the following paragraphs.):

1. remove the rear protection guard, loosening the two fixing screws.

2. Put back the battery in the waste tank

3. make sure the battery has been connected properly, lastly connect the power cable.

4. Close the panel

5. Safely connect the two red connectors ( Anderson plug fitting) to the electric.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 3

Fig 9

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 4

Fig 5

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 6

7.2. Splash guard

The chamber where the dryer brush rotates is delimited by a rubber band which has the

scope to avoid water splashes but holds detergent on the brush. The rubber band, or

“bumper” is fixed on the brush plate across two steel rings. Dismantling is done by

releasing the rings on the opposite grooves in the brush plate.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 7

7.3. Mounting the brush

The brush is easily mounted raising the brush plate across the opposite third wheel near the

back of the machine, on the side SX of the brush plate, as shown in the pictures.

1. Switch off all motors, shutting down power to all the machine.

2. Using the raising lever on the brush plate, as shown in the Fig, turning until the third

wheel is not resting on the floor and the brush plate is raised off the floor.

3. Position the brush under the brush plate, central to the hub, and with two hands

pushing up with one decisive movement so it fastens and remains parallel to the

brush plate.

4. Make sure the brush is fixed and positioned on the hub. ( the pivots of the central hub

must sit in the seats as shown in fig 14.

5. Lower the brush plate ,again using the lever, in the opposite direction.

Switch power back on, and switch on brush rotation. Fig 8

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 9

Fig 10

Fig 11

Filling the solution detergent tank.

The solution detergent tank is on the front of the machine, to fill you need to unscrew the

plastic cap on the top. Filling is simply done through this filler cap.. ( see fig ) .

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 12

Fig 13

Refill the tank with clean warm water ( not exceeding 50° C), at this point add the detergent

in the way and concentration suggested by the seller.

ATTENTION: TRY TO AVOID CAUSING TO MUCH LATHER, which could damage the

suction motor For this reason it is advisable to use the minimum amount of detergent, as

suggested by our company. Use a low lather solution and eventually introduce some anti-

lather liquid in your waste tank. Not for any reason must high acid solutions be used.

7.4. Note: detergent tank capacity = 35 litres

WASTE TANK

The waste tank is positioned centrally and constitutes the“ main frame ” of the machine.

To empty the tank,once filled with waste water you need to proceed this way:

• Empty waste water in a place where it is not going to harm the environment .

• Unfasten the corrugated waste tube, after having positioned it into the waste outlet,

open the waste tap.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

To clean the waste tank it is neccessary to unscrew on of the two caps which are placed on

top, of the side ( one right one left).

This operation only needs to be done if you need to clean the waste tank, proceed as follows:

• Remove the washer taps

• Fill with 4/5 litres of detergent/water solution.

• Move the machine from front to back to clean the tank.

• Empty as previously shown.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 14

Fig 15

Fig 16

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

The waste tank contains a float,which, by a led light on the control panel signals that the

waste water level is not at maximum. When the light switches off the waste tank needs

emptying.

NOTE: Maximum waste water capacity = 36 litres

7.5. Battery charging

The state of battery charge can continuously be see by a series of led lights on the control

panel.

• Green led on: battery charged

• Yellow led on: battery will soon need charging

• Red led on: no charge , charge battery immediately.

To re-charge the battery pack proceed as follows:

1. Switch off general ignition

2. take out the Anderson type plug, at the back of the machine.

3. Plug the charger into the domestic mains, assembled at the back of the machine.

Fig 17

Fig 18

NOTE: Only use the battery charger supplied with the machine ,avoid any other charger as

it may not have the same characteristics.

7.6. Adjusting handlebar tilt

The machine has been given a practical tilt adjustment ( height) on the handlebars.

To adjust the handlebar height you need to use the closing screw which is situated on the

stirrup,as shown in the Fig.

• loosen the screws ( on the battery chamber, left and right),

• Position the handlebars to the desired height.,

• Tighten the screws.

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Plug battery charger into

this plug socket.

Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB

Fig 19

05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB

Page is loading ...

Elsea compact Instruction and Maintenance Manual

Brand: Elsea

Model: compact

Type: Instruction and Maintenance Manual

This manual is also suitable for

Elsea ZLA40C is a compact and versatile floor cleaning machine designed for effective cleaning and drying of various floor surfaces. Its features include:

Interchangeable brush system with a 360 mm cleaning width, allowing for efficient dirt removal.
Powerful suction motor for thorough liquid pickup, leaving floors dry and clean.
Manual advance system for precise maneuverability and control during operation.
Durable construction with a stainless steel brush plate and chassis body, ensuring longevity and reliability.
Convenient solution and waste tank capacities of 35 and 45 liters respectively, minimizing the need for frequent refilling and emptying.

Download PDF

report

Elsea compact Instruction and Maintenance Manual

This manual is also suitable for

Elsea compact Instruction and Maintenance Manual

Related papers

Other documents