Haier LC32F2120 User manual

LC32F2120

LCD

Contents

Safety and warnings.......................................................................................2-3

Introduction..................................................................................................4

Stand installation guide................................................................................. 5

Installation................................................................................................... 6-9

Remote Control............................................................................................10

Operation..................................................................................................... 11-15

Trouble Shooting...........................................................................................16

DVD Operation............................................................................................. 17-20

DVD Trouble Shooting...................................................................................21

Warranty...................................................................................................... . 2 2

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

The symbol indicates that dangerous

voltages constituting a risk of electric shock

are present within this unit.

The symbol indicates that there are

important operating and maintenance

instructions in the literaturaccompanying this

unit.

To reduce the risk of fire or electric shock, do

not expose this Television to rain or moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this Television near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in

accordance with the instructions.

8) Do not install near any heat sources such as

radiations, heat registers, stoves, or other Television

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

plug. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protected the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

Television.

11) Only use attachments/accessories specified by

the manufacturer.

12) Unplug this Television during lighting storms or

when unused for long periods of time.

13) Refer all servicing to qualified service personnel.

Servicing is required when the Television has been

damaged in any way, such as; power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the Television, the Television has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

14) Mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

15) The ventilation should not be impeded by

covering the ventilation openings with items, such as

newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles,

should be placed on the Television.

17) Attention should be drawn to the environmental

aspects of battery disposal.

18) The use of Television in moderate climate.

19) The Television shall not be exposed to dripping

or splashing and that no objects filled with liquids,

such as vases, shall be placed on the Television.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user accessible

parts. When servicing use only

identical replacement parts.

This marking indicates that this product should

not be disposed with other household wastes

throughout the EU. To prevent possible harm to

the environment or human health from

uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of

material resources. To return your used device,

please use the return and collection systems or

contact the retailer where the product was

purchased. They can take this product for

environmental safe recycling.

The batteries shall not be exposed to

excessive heat such as sunshine, fire or the

like.

WARNING:

The excessive sound pressure from earphones

and headphones can cause hearing loss.

WARNING:

Haier is committed to safely recycling

electronic products and product materials.

Please check for a local recycling location in

the United States at: 1800RECYCLING.COM

or call 1.800.RECYCLING.

When the television receiver is not used for an

extended period of time, it is advisable to disconnect

the AC power cord from the AC outlet.

Dim:5 15*32 0mm(不包括底座）

Input Power Voltage:

AC 100-240V 50/60Hz

Infrared Remote Control....................

1

User’s M anual .................................

1

Battery(AAA)................................... 2

Power Cable.....................................

1

■ Integrated ATSC TV tuner for HDTV broadcast reception

■ High brightness provides a vivid and brilliant picture

■ Deeper blacks and brighter whites with high contrast

■ Wide Screen aspect ratio (16:9) for a complete home

theater experience

■ HDMI input for true digital connection

■ VGA port for connection to PC

■ Built-in stereo speaker system

■ Full-function Remote Control

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

120W

Stand

TV

Place the Stand on the TV

2. Place the Stand on the TV as shown below.

3

1

2

1

2

3

4

5

6

7

8

9

VID EO

L

R

AV2

USB

7. Component Video (YPbPr) Input

8. Composite Video Input

9. HDMI2 Input

10. HDMI1 Input

11. AC Power Socket

1. Antenna Socket

2. Coaxial

3. PC Audio Input

4. Headphone Output

5. VGA Port (PC Input)

6. Audio Input

1 2

3

4 5

6

7

9

1011

8

VGA INPU T

R

L

Y

Pb

Pr

AV1

HDM I1 INPU THDM I2 INPU T

COMPONENT

INPUT

RF INPU T

HEADPHONE

COAXIAL

PC AUD IO

INP UT

AC INPU T

100-2 40V ~50 /60 Hz

AUD IO

INP UT

Note: 1. Composite video input and component video input share the audio input.

2. When HDMI1 has an input signal coming from a DVI source then the audio input signal

must be connected to the PC audio input.

3. When HDMI2 has an input signal coming from a DVI source then the audio input signal

must be connected to the YPbPr/AV audio input.

BLUE

1

2

3

4

5

6

7

8

9

10

720*400

640*480

800*600

1024*768

1280*1024

70

60

75

60

75

60

70

75

60

75

31.47

37.50

37.88

46.88

48.36

56.48

60.02

63.98

80.00

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

PRESET MODE

VGA IN PUT

R

L

Y

Pb

Pr

AV1

HDM I1 INPU THDM I2 INPU T

COMPONENT

INPUT

RF INPUT

HEADPHONE

COA XIAL

PC AUDI O

INPU T

AC IN PUT

100 -240V ~50/6 0Hz

AUD IO

INP UT

VIDEO

L

R

AV2

USB

Yellow (video)

White(audio L)

Red(audio R or Pr)

Y

W

R

W

R

To audio outputs

VIDEO EQUIPMENT

TO VIDEO

output

W R

G

B

R

G

R

B

Blue(Pb)

Green(Y)

B

G

VIDEO EQUIPMENT with YPbPr

W

R

HDMI

VGA INPUT

R

L

Y

Pb

Pr

AV1

HDM I1 INPU THDM I2 INPU T

COMPONENT

INPUT

RF INPU T

HEADPHONE

COAXI AL

PC AUD IO

INP UT

AC INPU T

100-2 40V ~50/6 0Hz

AUD IO

INP UT

-10-

1 2

3

4

5

6

7

8

9 0

+

CH

_

+

_

VOL

SLEEP P.G

P.M

EXIT

S.M

TV DISPLAY

SOURCE

MENU

MTS/SAP

MUTE

POWER

ASPECT

RECALL

CH LIST FAVEPG

RETURN

DISPLAY SUBTITLE

AUDIO

REPEAT

CC

GOTO

MENU

SETUP

PAGE UP

PAGE DOWN

EPG

ENTER

REMOTE CONTROL

1

2

3

4

5

6

7

8

9

10

19

20

24

25

26

27

28

29

11

12

13

14

15

16

17

18

32

21

22

23

30

31

33

1:POWER

Press to power ON/OFF (standby) the TV.

2:NUMBER KEY:

Press to enter the TV channel number and select a channel

(Press " " to choose the sub-channel).

3:MENU

Press to display the on screen display (OSD) menu or

return to the previous menu.

4:CURSOR

When the OSD menu is displayed on-screen, use these

buttons as the up, down, left, right and ENTER buttons to

adjust the various options in the OSD menu.

5:EXIT

Press to exit the OSD menu.

6:VOL+/-

Press VOL+ or VOL- to adjust the volume.

7:P.M

Press repeatedly to select a picture mode.

8:PAGE DOWN/PAGE UP

In EPG mode, use this key to page up/down the EPG

information.

9:SLEEP

Press repeatedly to set the sleep timer. The TV will automatically

turn off after the selected amount of time passes.

10:P.G

Press to go the Parental Control settings menu.

11:MUTE

Press to switch the sound ON/OFF.

12:RECALL

Press to switch between the current and previously viewed

channel.

13:SOURCE

Press to display or exit the TV input source menu.

14:ENTER

Press to confirm a selection.

15:TV DISPLAY

Press to show the information about the current input source.

16:S.M

Press repeatedly to switch audio modes.

17:CH+/CH-

Press CH+ or CH- to browse through the TV channels.

18:ASPECT

Press to change the picture aspect ratio.

19:CH LIST:

Press to display the channel list. In DVD mode, press to eject

the disc.

20:EPG:

Press to display the DTV Electronic Program Guide.

In DVD mode, press to go to the previous chapter.

21:FAV:

Press to display the favorite channels list. In DVD mode,

press to go to the next chapter.

27:CC

Press to turn on or off the closed captions.

31:MTS/SAP

Press to activate the NTSC TV sounds, such as Stereo,

SAP or Mono tone, and audio languages of DTV.

Insert Batteries Into the Remote Control

1 2

3

Remark:

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the

polarity (+ or -) of the batteries matches the polarity

marks inside the unit.

3. Mount the battery cover.

Replace with new batteries when the TV set begins

to show the following symptoms:

Operation is unsteady or erratic. Sometimes the TV

set does not function with Remote Control Unit.

1) Alkaline Battery Recommended.

2) Remove batteries when they are exhausted or if the

remote control is not to be used for long time.

NOTE:

For the function of DVD button,please refer to the

DVD part at the back of this instruction book.

OPERATION

The first item of the MENU is the PICTURE MENU.

This menu provides several video adjustment options

for fine tuning the video display.

Press to select, press to adjust, press MENU

to exit.

1). Picture Mode: Select the user picture mode (Standard,

Sports, Movie, Custom, Vivid).

2). Brightness: This will adjust the light output of the

complete picture. This will mainly affect the darker

areas of the picture.

3). Contrast: This will adjust the intensity of bright parts

in the picture but keep the dark parts unchanged.

4). Color: This will adjust the saturation level of the

colors to suit your personal preference.

5). Tint: Allows you to select color mix (tint) of the

picture.

6). Sharpness: This will adjust sharpness of fine details

in the picture.

1. PICTURE MENU

Note:

The Audio language is available for ATSC (DTV)

programs.

option only

3. SETUP MENU

The third item of the MENU is the SETUP MENU.

You can here.

Press to select, press to adjust, press MENU to exit.

set system settings

Note:

Restore Default: Reset all settings to the factory

default value.

Channel names that have been changed through the option

in the Channel Menu are not reset when a restore default is

initiated.

Select

Adjust

Menu

Exit

Parental Controls

Timer

Closed Caption

Menu Settings

VGA Settings

Restore Default

>

Picture Mode

Standard

Contrast

50

Brightness

50

Color

50

Tint

0

Sharpness

Advanced Video

50

Select

Adjust

Menu

Exit

< >

>

2. AUDIO menu

The second item of the MENU is the AUDIO MENU.

You can adjust sound options here.

Press to select, press to adjust, press MENU

to exit.

1). Sound Mode: Select the user sound mode (Standard, News,

Music, Theater, Sports, Custom).

2). Bass: Adjust to increase or decrease lower-pitched sounds.

3). Treble: Adjust to increase or decrease higher-pitched sounds.

4). Balance: Adjust to emphasize left or right speaker balance.

5). Surround: Turn on or off the simulated surround sound

feature.

6). AVL: Auto Volume Leveler, This will reduce the differences in

volume level during commercials or when changing the channel.

7). Digital Output: Select the digital sound signal that will be

output from the coaxial audio output.

8). Audio Language: Select the audio language (English,

French, Spanish).

Color Temp. Normal

Select

Adjust

Menu

Exit

< >

Aspect Wide

Noise Reduction Middle

< >

Press to select Advanced Video, press , and

the screen shown below will be displayed.

1). Color Temp: This will increase or decrease Warm (red)

and Cool (blue) colors to suit your personal preference.

Select Cool to give the white colors a blue tint, Normal

to give the white colors a neutral tint, Warm to give the

white colors a red tint.

2). Aspect: This will vary the size of the image on the TV

screen. There are four modes which can be selected

(Wide, Zoom, Cinema and Normal).

3). Noise Reduction: Adjust to reduce the appearance of

noise in the picture (dots). There are five modes to

choose from (Strong, Auto, Off, Weak and Middle).

Advanced Video:

Note:

If you want to adjust contrast, brightness, color,

and sharpness, the picture mode must to

"Custom".

be set

Standard mode is the default setting, if you

select other options, the power consumption may

change.

Select

Adjust

Menu

Exit

Sound Mode Standard

Bass

50

Treble

50

Balance

0

Surround

AVL

Digital Output PCM

Off

< >

Audio Language English

< >

OPERATION

Change Password:

Press , and the screen

shown below will be

displayed.

2). New password: Input the new password

Select

Adjust

Menu

Exit

New password

Confirm password

----

Old password

----

1). Old password: Input the old password

P.G switch:

When the is ON, the options

can be adjusted.

Parental Control shown

below

US: Press , and the screen shown below will be displayed.

Select

Adjust

Menu

Exit

TV

MPAA N/A

>

< >

Select

Adjust

Menu

Exit

Enter Password ----

Input the password, and you will

menu. The factory default password is 0000.

enter the Parental

Control

Select

Adjust

Menu

Exit

Change password

P.G switch

Off

US

Canada

RRT setting

Reset RRT

< >

>

3). Confirm password: Input the new password again

1): TV: Press , and the screen

shown below will be

displayed.

Select

Adjust

Menu

Exit

ALL

FV

V

S

L

D

Press the ENTER key to lock/unlock .Parental Controls

Rating Content

FV

(Fantasy

violence)

V

(Violence)

S

(Sexual

situation)

L

(Adult

language)

D

(Sexually

suggestive

dialog)

Suggested

age

TV-Y (All

children)

TV-Y7(Direct to

order children)

TV-G(General

audience)

TV-PG(Parental

Guidance

suggested)

TV-14(Parents

strongly

cautioned)

TV-MA(Mature

audience only)

X

Content

2). MPAA: switch the movie-rating control level: N/A,

G, PG, PG-13, R, NC-17, X.

Rating

Description

Age

G General audiences, All Ages admitted

PG

Parental Guidance suggested. Some material may not be

Suitable for children.

PG-13

Parents strongly cautioned. Some material .may be

Inappropriate for children under 13.

R

NC-17

X

Restrict. Under 17 requires accompanying parent or adult

guardian (age varies in some jurisdictions).

No one 17 and under admitted.

X is an older rating that is unified with NC-17 but may be

encoded in the data of older movies.

Canada: Press , and the screen

shown below will be

displayed.

1): Canada English: switch the English-rating control level:

EXEMPT, C, C8+, G, PG, 14+, 18+.

Select

Adjust

Menu

Exit

Canada English

Canada French

EXEMPT

< >

EXEMPT

< >

3.1. Parental Controls:

Press to select , press , and the

screen

Parental Controls

shown below will be displayed.

OPERATION

Rating

Description

Age

E Exempt: Includes news, sports, documents and other information

programming: talk shows, music videos, and variety programming.

C Children: Intended for younger children under the age of 8 years.

Pays careful attention to themes that could threaten their sense of

securityand well-being.

C8+ Children over 8 years old: Contains no portrayal of violence as the

preferred, acceptable, or only way to resolve conflict; nor encourage

children to imitate dangerous acts which they may see on the screen .

G General: Considered acceptable for all age groups, Appropriate

viewing for the entire family, contains very little violence, physical,

verbal or emotional.

PG Parental Guidance: Intended for a general audience, but may not be

suitable for younger children (under the age of 8) because it could

contain controversial themes or issues.

14+ Over 14 Years: Could contain themes where violence is one of the

dominant elements of the storyline, but it must be integral to the

development of plot or character. Language usage could be profane

and nudity, present within the context of the theme.

18+ Adults: Intended for viewers 18 years and older and might contain

depictions of violence, which while related to the development of

plot, character or themes, are intended for adult viewing. Could

contain graphic language and portrayals of nudity.

2).Canada French: switch the French-rating control

level: E, G,8ANS+,13 ANS+,16ANS+,18ANS+.

Rating

Description

Age

E Exempt programming

G General: All ages and children, contains minimal direct violence,

but may be integrated into the plot in a humorous or unrealistic

manner .

8ans+ General but inadvisable for young children: May be viewed by a

wide public audience, but could contain scenes disturbing to

children under 8 who cannot distinguish between imaginary and

real situations. Recommended for viewing with paren . tal guidance

13ans+ Over 13 years: Could contain scenes of frequent violent scenes

and intense violence.

16ans+ Over 16 years: Could contain frequent violent scenes and violence.

18ans+ Over 18 years: Only for adult viewing. Could contain frequent

violent scenes and extreme violence.

Reset RRT: Press , and the screen

shown below will be

displayed.

RRT setting: in ATSC digital TV mode, this option

could can be adjusted

Select

Adjust

Menu

Exit

Are you sure?

NO

YES

Press ENTER Key To Select

3.2 Timer

You can adjust the sleep timer and time related settings here.

Press to select, press to adjust, press MENU

to exit.

Sleep Timer: You can set the sleep timer.

Note:

Time zone, DST and Clock are available in ATSC ,

and the Clock can't be adjust .

mode

ed

Select

Adjust

Menu

Exit

Sleep timer

Time zone

DST

Clock

1999/12/31 04:03PM

Pacific

Off

< >

2): Option: You can edit the closed caption options.

Press , and the screen shown below will be displayed.

NOTE: Only available in ATSC mode.

1): Advanced selection: only ATSC mode.available in

3.3 Closed Caption: switch the closed caption mode.

Press to select Closed Caption, press , and the

screen shown below will be displayed.

Select

Adjust

Menu

Exit

CC Mode

Basic Selection

Advanced Selection

Option

Off

CC1

Service 1

< >

>

Select

Adjust

Menu

Exit

Mode

Font style

Custom

Default

Font size Default

Font Edge style Default

Font Edge color Default

FG color Default

BG color Default

FG opacity Default

BG opacity Default

< >

OPERATION

1). Air/Cable: Select Air TV signal or Cable TV signal.

2). Auto Scan:

, and the screen

If it's the first time using the TV, you

should perform a full channel scan in order to capture

and store all available channels.

Press the to confirm shown below

will be displayed.

Select "YES" and

and the screen

press the ENTER to confirm,

shown below will be displayed,

which indicates that the auto search is progressing.

Menu Language English

Select

Adjust

Menu

Exit

< >

3.5 VGA Settings: O

nly available in VGA (PC input)

mode.

1). H-Pos: Adjust the horizontal position of the screen.

2). V-Pos: Adjust the vertical position of the screen.

3). Clock: Fine tune the screen width.

4). Phase: Fine tune the phase of the screen. Usually

don't adjust this item .

5). Auto: Auto adjust to fit the screen.

you need to option

Press to select VGA Settings, press , and the screen

shown below will be displayed.

Select

Adjust

Menu

Exit

H-pos

V-pos

Clock

Phase

50

Auto

50

>

4. Channel MENU

Here you add/skip TV channels and customize displayed

channel info.

Press to select, press to adjust.

Select

Adjust

Menu

Exit

Air/cable

Auto Scan

Air

Favorite

Show/Hide

Channel NO.

Channel Lable.

DTV signal: Good

2-1

< >

>

Select

Adjust

Menu

Exit

Are you sure?

NO

YES

Press ENTER Key To Select

Select

Adjust

Menu

Exit

R F CH: 4

Found: 4

Analog: 1

Digital: 3

3.4 Menu Settings

You can adjust Menu Settings here.

Press to select, press to adjust, press MENU

to exit.

3). Favorite: Press ENTER to add/delete favorite channels.

4). Show/Hide: Press the ENTER button to display or

hide channels.

5). Channel NO . : Display the current channel number.

Press to change the channel.

6). Channel label: Press and to edit the current

channel name.

7). DTV signal: Display DTV signal strength.

Signal strength indicator is for reference only, it

cannot be selected or adjusted.

OPERATION

5. Multimedia MENU

With an external storage device attached to the USB input,

you can use the Multimedia Menu to display JPEG pictures

and play MP3 music.

Before starting operation, verify that the USB storage device

is using the FAT32 file system format. This television does

not support NTFS or other formats. Please use a high-speed

USB 2.0 device with a maximum capacity of 50GB.

1. Select a Photo

The screen shown below will be displayed.

: pause

: stop

: fast backward

: previous

: next

: fast forward

: repeat all

: random play

Random

2. Select Music

The screen shown below will be displayed.

USB

C:

Photo Music

..

Everything I do.mp3

C:\laoge\

:17 001/018

Total size:3.7 GB

Unused size: 3.7 GB

Sealed With A Kiss.mp3

.mp3

Everything I do.mp3

Title:

Artist:

Album:

Year:

Bit Rate: 128kbps

Play

05:49 06:33

Random

Use select the .jpg files or folders,

to display the photo or open the folder, EXIT to

stop playing or go to the menu.

press ENTER

press

play or open the folder, EXIT to go to menu.

press ENTER

press the previous

USB

C:

Photo Music

..

011.jpg

200812222178878787.jpg

20081.jpg

20087.jpg

20287.jpg

20787.jpg

20087.jpg

20787.jpg

20087.jpg

C:\photo\

:17 001/018

Total size:3.7 GB 1024 x 768 372.72KB

Unused size: 3.7 GB 2006:07:14 15:37:42

011.jpg

: play

The LCD TV panel is built with very high precision technology giving you fine picture details

in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed

point of red, green, blue, black or white. Please note this does not affect the performance of

the product.

microwave,

Component (Y Pb Pr) connections

-17-

Dolby Digital

32

Subtitle choices

8

Audio choices

MP3 files on

CD-R/CD-RW

16:9

LB

TV Aspect

Ratio modes

DVD video

R

RESTRICTED

Parental Lock

This product incorporates copyright

protection technology that is protected

by method claims of certain

U.S.patents and other intellectual

property rights owned by Macro vision

Corporation and other rights owners.

Use of this copyright protection

technology must be authorized by

Macro vision Corporation, and is

intended for home and other limited

viewing uses only. Unless otherwise

authorized by Macro vision Corporation.

Reverse engineering or disassembly is

prohibited.

Manufactured under license from Dolby

Laboratories."Dolby" and the double-D

symbol are trademarks of Dolby

Laboratories. Confidential Unpublished

Works. 1992-1997 Dolby Laboratories, Inc.

9

Multi-angle

DVD OPERATION

Caution

This DVD Player has a Class 1 laser which may

be harmful to your eyes. Do not attempt to

disassemble the cabinet or make any adjustments.

Refer all servicing to a qualified professional.

Features

Disc formats supported by this player:

CH LIST/

How to play a DVD disc

1. Change the TV input source to "DVD" mode by pressing

the SOURCE button on the remote or

on the side of the TV.

2. Place the DVD disc in the slot with the content side

(shiny side) facing the front of the unit.

3. The DVD disc will automatically be loaded in to the player

and begin to play.

4. To eject the DVD disc, press the button on

remote or the OPEN/CLOSE button on the side of the unit.

SOURCE

OPEN/CLOSE

PLAY/PAUSE

Disc with its content side

(shiny side) facing the front

of the unit, insert vertically

into the disc tray

DVD SIDE PANEL

-18-

MENU OPERATION

Press the SETUP button on the remote control, the

SETUP MENU will be displayed. After accessing the

setup menu, press to select an item, and press

to select the SUBMENU item. Then press the

ENTER/OK button to confirm. Press to return to

the previous menu. To exit the setup, press the

SETUP button again. In the SETUP MENU, you may

choose adjust any of the following options.

LANGUAGE SETUP

Select Language in the setup menu, and display the

Language submenu:

OSD Language

Use this item to select the language for the

setup menu and screen display.

Subtitle

This option provides the preset subtitle language.

Audio

Select the built-in disc dubbing language options.

DVD Menu

This option provides the film's menu language

options.

VIDEO SETUP

Select Video in the setup menu, and display the

Video submenu:

desired

SYSTEM SETUP

Aspect Ratio

Select the aspect ratio.

Notes:

TV System

Select the TV system.

For more information on output format,

refer to the instructions or your TV set.

RATING SETUP

Select Rating in the setup menu, and display

the Rating submenu:

The image display ratio is related to the recorded disc

format. Somes discs can not display images in the

aspect ratio you choose. If you play a disc recorded in

4:3 format on a wide screen TV, black bars will

appear on the left and right side of the screen. You

must adjust the screen setting depending on the type

of the television you have.

Note: The DVD player setting should be matched to

your TV set.

Parental Control

Set the parental control feature of the player

Note: The password is needed to set up the Parental

Control.

Set Password

Input four digits (password), then press ENTER /Ok

to confirm.

Note: If you forget your password, please use the

universal password 6666 to unlock.

MISC SETUP

Select MISC in the setup menu, and display

the submenu:

Use Default Settings

Reset setup data to factory default value.

DVD OPERATION

-19-

MP3/JPEG PLAYBACK

PICTURE CD PLAYBACK

The PICTURE CD disc has such a directory structure

structure as shown in the following picture.

Press Direction key to choose the root

directory and then press ENTER/OK button to

enter into the sub directory. Press Direction

key to choose the desired picture and then

press ENTER/OK or PLAY to enjoy the

picture. If you want to return to the upper menu,

press Direction key to choose the icon and

press ENTER/OK button.

Image rotation

In picture play state, press Direction key to

rotate the picture.

The MP3 disc has a directory structure as shown

picture above.

Press to choose the root directory and then press

ENTER/OK button to enter into the sub directory.

Press to choose the desired track and then press

ENTER/OK or PLAY to enjoy the music or movie. If

you want to return to the previous menu, press

to choose the icon and press the ENTER/OK

button.

Filter: Select the categories of files that are

displayed in the browser list.

Repeat: Change the repeat playing mode

Mode: Select different play modes:

Normal: Play chapters/tracks in normal order.

Shuffle: Play tracks/chapters in a random order until

all tracks/chapters have been played.

Edit Mode: Program tracks/chapters to play. When

you select the mode, press to directory and press

ENTER/OK to choose the desired track. Select Add

to program. Select Program view and select Edit

mode to cancel the edit mode. Press to display the

programmed tracks and press ENTER/OK to start

playback.

Program view: Display the programmed tracks.

Browser view: Display the track directory.

Add to program: Choose the track select Add to

program to add the track to the program play list.

Clear program: In the complete stop state (press the

STOP button twice), select Edit mode to enable the

edit mode. Press to program track and press

ENTER/OK to cancel the desired track. Select Clear

program to delete all tracks in the program play list.

DVD OPERATION

Page is loading ...

Haier LC32F2120 User manual

Haier LC32F2120 User manual

Related papers

Other documents