User manual Socks-jet
I. Preparation
Step 1
Place the Socks-jet on a flat, dry surface. The hand grip
points towards you and the open tube side to the front.
Wear rubber gloves to protect your stockings.
Step 2
Pull the stocking over the tube body and make sure that
the stocking tip is facing forward.
Step 3
Strip the stocking over the Socks-jet until the heel knit
appears at the top of the tube body.
II. Donning
Step 1
Place the Socks-jet in front of you on the floor and
stabilize your position or sit down. Slide your forefoot
into the open stocking.
Step 2
Slide down your foot until your heel is correctly
positioned in the stocking. Now pull the stocking
upwards to get out of the tube body. Please check the
comfort of your toes and heel again.
Step 3
Lift your stockings to their final position and smooth
them with your hands towards your knee or thigh. Look
for a wrinkle-free fit.
III. Doffing
Step 1
Place your foot in the Socks-jet and sit down. Slide the
stocking over the tube body from above and strip it as
far as possible, past the clamping jaws, downwards.
Step 2
Use the hand grips and press them inwards, so that the
clamping jaws push against the tube body.
Step 3
Tilt the Socks-jet and push it with your arms straight
forward. Now slowly pull your foot out of the fixed
stocking.
IV. Passive use
With Assistance
Use the integrated hand grip for a simple application by nursing and support
staff.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
SINGER Mk1 Owner's manual
-
Edelbrock 3563 User manual
-
Beretta SIDE BY SIDE Owner's manual
-
SIG SIGRC62 User manual
-
Craftsman 113.228162 Owner's manual
-
JET 719600 User manual
-
Cobra 2003 User manual
-
-
Jet Tools Lathe JWL-1642EVS User manual
-
BT / Empire Battle Tested BT-4 Combat Owner's manual