PLCMDVR45 HOW TO CHANGE BACK TO ENGLISH AFTER FACTORY RESET
1. The following picture is when reset.
2. After reset, it will show as follows:
3. Use the up and down button to find the item for language setting: as follows:
press the ok button to confirm to change the language
4. Will see the following picture:
5. Use the up and down button to choose “ English” and then press ok to confirm.
6. After this step you will see following picture, then it is in English already.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI