Datalogic Rhino II, 94ACC0173, Rhino II™ Owner's manual

Hello! I am an AI chatbot trained to assist you with the Datalogic Rhino II Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

INSTRUCTIONS

Datalogic and the Datalogic logo are registered trademarks of Datalogic

S.p.A. in many countries, including the U.S. and the E.U. Rhino is a

trademark of Datalogic S.p.A. and/or its affiliates. All other brand and

product names may be trademarks of their respective owners.

www.datalogic.com

94ACC0173 Cable Cover, 5 poles, w 2.9m power cable

General Features

Cable Cover, 5 poles, w 2.9m power cable extends the VMC with the possibility to access USB & the

12/24/48 VDC power supply when the cable cover is closed.

The pack contains the following components

• 1x Cable Cover, 5 poles, USB access

• 4x M3x10 phillips head

• 4x cable passage type 1

• 3x cable passage type 2

• 6x cable passage type 3

• 1x Power cord 12/24/48 VDC, 2.9m

• 6x cable tie

Assembling cable passage on the VMC

There are 3 types of cable passages

Assembling Cable Cover, 5 poles, USB access

Connect the USB cable, the power supply and the

ground cable on the backside of the VMC

Put the Cable Cover, 5 poles, USB access in the groove of the

VMC

Type 1:

e.g. USB Cable

Type 2:

e.g. power cord

Type 3:

no cable

INSTRUCTIONS

822002510

Push the Cable Cover, 5 poles, USB access down

Fix the Cable Cover, 5 poles, USB access with 4 screws and

fasten them with 1 Nm

Connect the Power cord 12/24/48 VDC, 2.9m to the Cable

Cover, 5 poles, USB access and screw it until it’s securely

fixed.

Cable pining:

1. IGN (ignition) brown

2. + (12/24/48 VDC) grey

3. – (GND) black