Candy CXW-245-C90T User manual
- Category
- Cooker hoods
- Type
- User manual
This manual is also suitable for
EUROPEAN RANGE HOOD
ELEGANT APPREANCE, CONDENSED QUALITY
NATIOANAL COMPLUSORY CERTIFICATION
CONTENTS
PRODUCT FEATURES INTRODUCTION
TECHNICAL PARAMETER
STRUCTURE DESCRIPTION
OPERATION INTRODUCTION
INSTALLATION INTRODUCTION
CLEANING AND MAINTENANCE
EXHAUST PIPE INSTALLATION INTRODUCTION
CIRCUIT DIAGRAM
PACKING LIST
Customer Service
Dear Customer,
Thanks for using our products!
According to the relevant provisions: with warranty card and valid invoice, we will provide the
following services for you:
This range hood has one year free warranty service from the date of purchase (the time of
guarantee from the date of purchase, subject to invoice) and can be guaranteed for you forever.
Within the warranty period, all parts damaged by quality problems are for free warranty.
Within the warranty period, the user must hold the valid purchase invoice of repair products, the
manufacturer specified Three Guarantees certificate, with valid date from the date of invoice.
Users should keep the warranty card and the purchase invoice, for they must be shown when
repaired.
According to national regulation, the following items are not included in free warranty, which
should be charged:
Improper damage of carrying, installing, using and maintenance.
Damage of power supply voltage lower than 187V or higher than 240V.
Self or non manufacturer special repair.
Without Three Guarantees certificate and effective invoice.
Damaged by irresistible force.
Out of free warranty period
Due to the use of environmental conditions, such as: power supply, water, temperature, humidity
and other factors that can not be controlled by the company, all the damage and loss is not
within the scope of free warranty.
Dear customer,
Thanks for choosing our products!
Our products set high, fine, sharp in one, with superior quality and performance. In order to
facilitate your use, please read the instructions carefully, and follow the steps.
In future, this range hood is likely to be changed without notice.
Product Features Description
High-end Manufacturing:
Using the leading CNC manufacturing process with no oil leakage, and sturdy stainless steel
materials to highlight the strength, high-end quality and excellent performance.
Stylish and Concise Appearance:
Simple straight line and graphic design, and the perfect combination of glass and stainless steel,
are suitable for a variety of kitchen decoration style, creating an artistic kitchen for you.
Three Dimensional Spiral Flow Smoke Collecting Chamber:
Use the innovative triangular negative pressure power principle, to create a perfect
three-dimensional spiral flow smoke collecting chamber, sweeping away the fumes, completely
changing the trouble of fumes escaping.
Energy-saving LED Cold Light:
Use bright energy-saving LED cold light, to meet the needs of modern home kitchen decoration,
and the use of energy-saving cold light technology, is with the advantage of long service life and
soft light.
More Humanized Design:
Suction structure with a shorter distance, absorbing more cleanly, solve the problem of oil splash
toward the wall; with easily detachable design of magnetic type and oil filter, it’s more
convenient to clean the oil filter and inside chamber.
Anion:
Fashionable and science function of anion neutralizes the indoor cooking fumes and harmful gas,
creating a natural forest bath kitchen, so that the food is full of cheerful energy of life.
Technical Parameter
CXW-245-C90D/CXW-245-C90T
Product Name Range Hood
Model
CXW-245-C90D/CXW-245-C90T
N.W(KGS) 21
Body Size(mm) 895×520×650
Voltage 220V-
Frequency 50Hz
Lighting Power 2.5W
×2
Rated Power 250W
Ventilation Quantity
19±10%m3/min
Wind Pressure 270Pa
Maximum static pressure 330Pa
Noise Level 69dB
Normal odor reduction ≧95%
Oil Resolution ≧80%
Energy Efficiency Grade 1
Operation Standard GB4706.1-2005 GB4706.28-2008 GB/T17713-2011 GB29539-2013
Structure Description
T11D9
Outer decorative cover
Outer decorative glass
Screw
Logo back-light screen
Filter
Oil collector
Air inlet ring
Jam nut
Rotor
Cabinet
Plastic Motor
T09F
Outer decorative cover
Screw
Logo back-light screen
Filter
Oil collector
Air ventilation Rubber
Jam nut
Rotor
Cabinet
Plastic Motor
Exhaust pipe installation introduction
1. Remove the fixed ring from outlet.
2. Connect the fixed ring with the pipe.Notice: two ends of pipe is different, please take care.
3. Install the fixed ring with exhaust pipe to the outlet. Notice: The 3 buttons on the fixed ring
should be buckled in order to prevent the smoke tube from loosening.
Circuit Diagram 见 Core draw 文件
Cleaning and Maintenance
Cleaning and Maintenance
Pull out the electric plug before repairing and maintaining the range hood and clean according to
the methods of Introduction, to avoid firing danger.
Wear gloves when cleaning surfaces to prevent your hands being hurt by seamed edges.
Don’t use water to wash the range hood directly.
The range hood should be maintained and cleaned regularly depending on the surrounding
environment to keep its cleanness, a good effect and a longer service life.
Rotor Cleaning:
Put down range hood from the wall, remove the outer decorative cover and cover the body with
a screwdriver; take apart the air inlet ring and twist the clamp nut of motor with dry cloth; then
take out the rotor and wash it with detergent; final install it after dried.
Notice: be careful when removing the rotor, to avoid being deformed.
Timely cleaning when oil reached two thirds of oil collector , to avoid spilling.
Pictures 15 for reference, remove the oil collector.
Stainless Steel Surface Cleaning:
Use neutral detergent without abrasive to
clean the surface, and do not clean with
hard object or steel ball.
Changing a Lamp:
You must pull off the electric plug before
changing a light. Keep the power rate of
lamp no more than 2.5W and you could
check the power rate from label.
Breakdown Reason Solution
Press any buttons but no responses
The plug is not or
improperly inserted or
no power supply
Plug the power cord
Press light switch button
, but the
lamp cannot turn on
The lamp is damaged,
poorly contacted with
the power supply.
Use a good lamp or plug the
power cord
There is faradic electricity on the
surfaces of the cooker hood with a
slight electric shock.
The electric outlet is not
effectively grounded.
Use one-way triple socket and
have a good grounding
Irregular sounds are heard when the
impeller operates.
The impeller becomes
looseand screws are not
fixed.
Fix the motor
Universal pipe with noise
Universal pipe does not
straightened.
Please install as required.
Oil dripping
Installation of oil
collector is not suitable.
Install correctly.
Notice: If your range hood occurred the following phenomena, you must unplug the power cord
and contact with our service center:
Irregular running sound when opening the range hood;
Abnormal phenomena or vibration when working.
Finding unpleasant smell, smoke, heating and other unknown phenomena.
To avoid danger, the damaged power cord must be replaced by manufacturer or professional
personnel.
Structure Description
图略
Operation Introduction
Switch button:
In shutdown condition, the range hood is on standby when touching this button; and touch again,
it is off.
Delayed button:
Touchthis buttonwhen the motor is working, the cooker hood will continue to operate 1
minute;touch again, the range hood will be off.
Low Speed:
In standby condition, touch this button to turn on the range
hood at low speed; touch again, the motor is off.
Anion Button:
In any condition, touchthis button to activate the anion
function; touch again, it is off.
High Speed:
In standby condition, touch this button to turn on the range
hood at high speed; touch again, the motor is off.
Light Button:
In any condition, touch it, touch this button to turn on the light,
and touch again to turn it off.
Mid Speed:
In standby condition, touch this button to turn on the
range hood at mid speed; touch again, the motor is
off.
Clock setting:
In shutdown condition, long press the Mid Speed , enter into hour setting in 3s; touch again,
enter into minute setting; then touch High speed or Mid Speed , to set the clock, and
again off.
Power Switch Button:
Touch this button, hood is on standby; again power is off.
Touchthis buttonwhen the motor is working, the cooker hood
will continue to operate 1 minute.
Sensor Button:
In standby condition, touch this button for 2s, enter into gas
sensor condition after 30s. When the range hood induced the
burning gas, automatically turn on the high speed; downshift
after 3 minutes; shut down in another 30s. Checking again after
10s, if yes, high speed start working; if not, the range hood is on
standby.
Shift Button:
In standby condition, touch this button once, operating at
high speed; twice, at mid speed; again, at low speed; and
again, back to standby.
Light Switch button:
Press this button to turn on the light, and press again to turn
it off.
Installation Introduction
Determine Installation Site: find out 4 holes
for hang strip first, with 50mm depth for each
hole and diameter 10mm.
Install Hang Strip: Put the expanded particles into
the holes randomly, then fix the expanded screws.
Install Exhaust Pipe: Insert the exhaust pipe to the air outlet, then fix it with ST3X38Self operated
screws; finally, straighten the exhaust pipe to the outside or the common flue.
Fixing the range hood on the wall:
Hang the hood with hang strip on the wall, to ensure no shaking and decoupling; keep it
horizontal; then tighten the screw in the middle of fall prevention bracket to avoid the hood
falling down.
Notice:
Please do not bend the exhaust pipe less than 90 degree;
Do not make the exhaust pipe with concave bend and decrease the number of bends as much as
possible.
Don’t connect the pipe with other exhaust pipe whose diameter is less than 170mm;
Please don’t insert the pipe too deeply if you want to connect the pipe with the public one, to
avoid increasing exhaust resistance.
Do not discharge the smoke from range hood into the hot chimney pipewith smoke from burning
gas or other fuels, to avoid fire accident.
Installation Notice:
The range hood should not be installed too
high or influenced by outside air flow, to
avoid the decrease of exhausting efficiency.
Warning:
Do not fire the range hood directly, to avoid
the flame burning into the cooker hood to
secure it from accidents.
When using the range hood over gas or
other fuels cooker, the room must be
well-ventilated.
Ensure enough space left for installing the hood
when making the cabinet, in favor of
maintenance and checking.
During installation, keep the range hood horizontal.
The electric outlet must be single-phase outlet
with good grounded wire.
Installed and operated by professional
personnel, explain the method to customers, if
no excepted phenomena.
PACKING LIST
NO. ITEM QUANTITY(PCS) NO. ITEM QUANTITY(PCS)
1 Main Body 1 8 Stick 5
2 Introduction Manual 1 9 Plastic bag 1
3
Universal Pipe ф170mm
1 10 Instruction plastic bag 1
4 Hang Strip 1 11 Setscrew ST×8 2
5 Oil Collector 1 12 Anchors Ф10×40 4
6 Ф5×40 Anchors 4 13 Air outlet 1
7 Foam 1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Candy CXW-245-C90T User manual
- Category
- Cooker hoods
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
