Candy CXW-245-C90D User manual

Brand: Candy

Model: CXW-245-C90D

Category: Cooker hoods

Type: User manual

This manual is also suitable for

CXW-245-C90T

Candy CXW-245-C90D is an innovative range hood that combines high-end manufacturing, stylish and concise appearance, three dimensional spiral flow smoke collecting chamber, energy-saving LED cold light, user-friendly design, anion function, and effective cleaning and maintenance. With its advanced features, Candy CXW-245-C90D offers efficient smoke and odor removal, creating a clean and healthy kitchen environment. Its sleek design and user-friendly operation make it a perfect addition to any modern kitchen.

EUROPEAN RANGE HOOD

ELEGANT APPREANCE, CONDENSED QUALITY

NATIOANAL COMPLUSORY CERTIFICATION

CONTENTS

PRODUCT FEATURES INTRODUCTION

TECHNICAL PARAMETER

STRUCTURE DESCRIPTION

OPERATION INTRODUCTION

INSTALLATION INTRODUCTION

CLEANING AND MAINTENANCE

EXHAUST PIPE INSTALLATION INTRODUCTION

CIRCUIT DIAGRAM

PACKING LIST

Customer Service

Dear Customer,

Thanks for using our products!

According to the relevant provisions: with warranty card and valid invoice, we will provide the

following services for you:

This range hood has one year free warranty service from the date of purchase (the time of

guarantee from the date of purchase, subject to invoice) and can be guaranteed for you forever.

Within the warranty period, all parts damaged by quality problems are for free warranty.

Within the warranty period, the user must hold the valid purchase invoice of repair products, the

manufacturer specified Three Guarantees certificate, with valid date from the date of invoice.

Users should keep the warranty card and the purchase invoice, for they must be shown when

repaired.

According to national regulation, the following items are not included in free warranty, which

should be charged:

Improper damage of carrying, installing, using and maintenance.

Damage of power supply voltage lower than 187V or higher than 240V.

Self or non manufacturer special repair.

Without Three Guarantees certificate and effective invoice.

Damaged by irresistible force.

Out of free warranty period

Due to the use of environmental conditions, such as: power supply, water, temperature, humidity

and other factors that can not be controlled by the company, all the damage and loss is not

within the scope of free warranty.

Dear customer,

Thanks for choosing our products!

Our products set high, fine, sharp in one, with superior quality and performance. In order to

facilitate your use, please read the instructions carefully, and follow the steps.

In future, this range hood is likely to be changed without notice.

Product Features Description

High-end Manufacturing:

Using the leading CNC manufacturing process with no oil leakage, and sturdy stainless steel

materials to highlight the strength, high-end quality and excellent performance.

Stylish and Concise Appearance:

Simple straight line and graphic design, and the perfect combination of glass and stainless steel,

are suitable for a variety of kitchen decoration style, creating an artistic kitchen for you.

Three Dimensional Spiral Flow Smoke Collecting Chamber:

Use the innovative triangular negative pressure power principle, to create a perfect

three-dimensional spiral flow smoke collecting chamber, sweeping away the fumes, completely

changing the trouble of fumes escaping.

Energy-saving LED Cold Light:

Use bright energy-saving LED cold light, to meet the needs of modern home kitchen decoration,

and the use of energy-saving cold light technology, is with the advantage of long service life and

soft light.

More Humanized Design:

Suction structure with a shorter distance, absorbing more cleanly, solve the problem of oil splash

toward the wall; with easily detachable design of magnetic type and oil filter, it’s more

convenient to clean the oil filter and inside chamber.

Anion:

Fashionable and science function of anion neutralizes the indoor cooking fumes and harmful gas,

creating a natural forest bath kitchen, so that the food is full of cheerful energy of life.

Technical Parameter

CXW-245-C90D/CXW-245-C90T

Product Name Range Hood

Model

CXW-245-C90D/CXW-245-C90T

N.W(KGS) 21

Body Size(mm) 895×520×650

Voltage 220V-

Frequency 50Hz

Lighting Power 2.5W

×2

Rated Power 250W

Ventilation Quantity

19±10%m3/min

Wind Pressure 270Pa

Maximum static pressure 330Pa

Noise Level 69dB

Normal odor reduction ≧95%

Oil Resolution ≧80%

Energy Efficiency Grade 1

Operation Standard GB4706.1-2005 GB4706.28-2008 GB/T17713-2011 GB29539-2013

Structure Description

T11D9

Outer decorative cover

Outer decorative glass

Screw

Logo back-light screen

Filter

Oil collector

Air inlet ring

Jam nut

Rotor

Cabinet

Plastic Motor

T09F

Outer decorative cover

Screw

Logo back-light screen

Filter

Oil collector

Air ventilation Rubber

Jam nut

Rotor

Cabinet

Plastic Motor

Exhaust pipe installation introduction

1. Remove the fixed ring from outlet.

2. Connect the fixed ring with the pipe.Notice: two ends of pipe is different, please take care.

3. Install the fixed ring with exhaust pipe to the outlet. Notice: The 3 buttons on the fixed ring

should be buckled in order to prevent the smoke tube from loosening.

Circuit Diagram 见 Core draw 文件

Cleaning and Maintenance

Pull out the electric plug before repairing and maintaining the range hood and clean according to

the methods of Introduction, to avoid firing danger.

Wear gloves when cleaning surfaces to prevent your hands being hurt by seamed edges.

Don’t use water to wash the range hood directly.

The range hood should be maintained and cleaned regularly depending on the surrounding

environment to keep its cleanness, a good effect and a longer service life.

Rotor Cleaning:

Put down range hood from the wall, remove the outer decorative cover and cover the body with

a screwdriver; take apart the air inlet ring and twist the clamp nut of motor with dry cloth; then

take out the rotor and wash it with detergent; final install it after dried.

Notice: be careful when removing the rotor, to avoid being deformed.

Timely cleaning when oil reached two thirds of oil collector , to avoid spilling.

Pictures 15 for reference, remove the oil collector.

Stainless Steel Surface Cleaning:

Use neutral detergent without abrasive to

clean the surface, and do not clean with

hard object or steel ball.

Changing a Lamp:

You must pull off the electric plug before

changing a light. Keep the power rate of

lamp no more than 2.5W and you could

check the power rate from label.

Breakdown Reason Solution

Press any buttons but no responses

The plug is not or

improperly inserted or

no power supply

Plug the power cord

Press light switch button

, but the

lamp cannot turn on

The lamp is damaged,

poorly contacted with

the power supply.

Use a good lamp or plug the

power cord

There is faradic electricity on the

surfaces of the cooker hood with a

slight electric shock.

The electric outlet is not

effectively grounded.

Use one-way triple socket and

have a good grounding

Irregular sounds are heard when the

impeller operates.

The impeller becomes

looseand screws are not

fixed.

Fix the motor

Universal pipe with noise

Universal pipe does not

straightened.

Please install as required.

Oil dripping

Installation of oil

collector is not suitable.

Install correctly.

Notice: If your range hood occurred the following phenomena, you must unplug the power cord

and contact with our service center:

Irregular running sound when opening the range hood;

Abnormal phenomena or vibration when working.

Finding unpleasant smell, smoke, heating and other unknown phenomena.

To avoid danger, the damaged power cord must be replaced by manufacturer or professional

personnel.

Structure Description

图略

Operation Introduction

Switch button:

In shutdown condition, the range hood is on standby when touching this button; and touch again,

it is off.

Delayed button:

Touchthis buttonwhen the motor is working, the cooker hood will continue to operate 1

minute;touch again, the range hood will be off.

Low Speed:

In standby condition, touch this button to turn on the range

hood at low speed; touch again, the motor is off.

Anion Button:

In any condition, touchthis button to activate the anion

function; touch again, it is off.

High Speed:

In standby condition, touch this button to turn on the range

hood at high speed; touch again, the motor is off.

Light Button:

In any condition, touch it, touch this button to turn on the light,

and touch again to turn it off.

Mid Speed:

In standby condition, touch this button to turn on the

range hood at mid speed; touch again, the motor is

off.

Clock setting:

In shutdown condition, long press the Mid Speed , enter into hour setting in 3s; touch again,

enter into minute setting; then touch High speed or Mid Speed , to set the clock, and

again off.

Power Switch Button:

Touch this button, hood is on standby; again power is off.

Touchthis buttonwhen the motor is working, the cooker hood

will continue to operate 1 minute.

Sensor Button:

In standby condition, touch this button for 2s, enter into gas

sensor condition after 30s. When the range hood induced the

burning gas, automatically turn on the high speed; downshift

after 3 minutes; shut down in another 30s. Checking again after

10s, if yes, high speed start working; if not, the range hood is on

standby.

Shift Button:

In standby condition, touch this button once, operating at

high speed; twice, at mid speed; again, at low speed; and

again, back to standby.

Light Switch button:

Press this button to turn on the light, and press again to turn

it off.

Installation Introduction

Determine Installation Site: find out 4 holes

for hang strip first, with 50mm depth for each

hole and diameter 10mm.

Install Hang Strip: Put the expanded particles into

the holes randomly, then fix the expanded screws.

Install Exhaust Pipe: Insert the exhaust pipe to the air outlet, then fix it with ST3X38Self operated

screws; finally, straighten the exhaust pipe to the outside or the common flue.

Fixing the range hood on the wall:

Hang the hood with hang strip on the wall, to ensure no shaking and decoupling; keep it

horizontal; then tighten the screw in the middle of fall prevention bracket to avoid the hood

falling down.

Notice:

Please do not bend the exhaust pipe less than 90 degree;

Do not make the exhaust pipe with concave bend and decrease the number of bends as much as

possible.

Don’t connect the pipe with other exhaust pipe whose diameter is less than 170mm;

Please don’t insert the pipe too deeply if you want to connect the pipe with the public one, to

avoid increasing exhaust resistance.

Do not discharge the smoke from range hood into the hot chimney pipewith smoke from burning

gas or other fuels, to avoid fire accident.

Installation Notice:

The range hood should not be installed too

high or influenced by outside air flow, to

avoid the decrease of exhausting efficiency.

Warning:

Do not fire the range hood directly, to avoid

the flame burning into the cooker hood to

secure it from accidents.

When using the range hood over gas or

other fuels cooker, the room must be

well-ventilated.

Ensure enough space left for installing the hood

when making the cabinet, in favor of

maintenance and checking.

During installation, keep the range hood horizontal.

The electric outlet must be single-phase outlet

with good grounded wire.

Installed and operated by professional

personnel, explain the method to customers, if

no excepted phenomena.

PACKING LIST

NO. ITEM QUANTITY(PCS) NO. ITEM QUANTITY(PCS)

1 Main Body 1 8 Stick 5

2 Introduction Manual 1 9 Plastic bag 1

Universal Pipe ф170mm

1 10 Instruction plastic bag 1

4 Hang Strip 1 11 Setscrew ST×8 2

5 Oil Collector 1 12 Anchors Ф10×40 4

6 Ф5×40 Anchors 4 13 Air outlet 1

7 Foam 1

Candy CXW-245-C90D User manual

Brand: Candy

Model: CXW-245-C90D

Category: Cooker hoods

Type: User manual

This manual is also suitable for

CXW-245-C90T

Download PDF

report

Candy CXW-245-C90D User manual

This manual is also suitable for

Candy CXW-245-C90D User manual

Other documents