RCA TP251N User manual

  • Hello! I am an AI chatbot trained to assist you with the RCA TP251N User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Se conecta al cable de teléfono e instala su teléfono de pared
Connects to phone wire and mounts your wall phone
Connects to phone wire and mounts your wall phone
Se conecta al cable de teléfono e instala su teléfono de pared
Wall Phone Mount
Montaje para teléfono de pared
TP251N
TP251N
DATE
CODE
Lifetime Warranty
Audiovox Electronics Corporation will replace this product, regardless of
how long you own it, if it should fail to perform to its design specifications.
Simply return to the following address for a replacement: Audiovox
Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788.
Garantía por Vida
Audiovox Electronics Corporation reemplazará este producto, independi-
entemente de por cuanto tiempo Ud. lo haya poseído, si se encontrara que
el producto no funciona según las especificaciones. Sencillamente
devuélvalo a la siguiente dirección para obtener un reemplazo: Audiovox
Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788.
0779000 40405
Audiovox
Lowes
TP251N Item R
PHONE
PC
© 2008 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Trademark(s) ® Registered
Marca(s) Registrada(s)
Made in China
www.rcaaccessories.com
TP251N NA CAW 00
How to install
1. Remove the front face plate.
2. Loosen the wall plate's terminal screws slightly. Connect the
strands from your phone wire to the terminals (make sure the
strands are stripped). Be sure to match colors. Tighten the screws.
3. Mount the wall plate to your electrical box or drywall.
4. Reattach the front face plate.
5. Plug in and mount your wall phone.
Cómo instalar
1. Retire la placa frontal.
2. Afloje un poco los tornillos de
terminal de la placa de pared.
Conecte los hilos del cable de
teléfono a los terminales
(asegúrese que los hilos estén
desforrados). Asegúrese de aparear
los colores. Apriete los tornillos.
3. Monte la placa de pared en la caja
eléctrica o la pared de yeso.
4. Vuelva a fijar la placa frontal.
5. Conecte y monte su teléfono
de pared.
INK
COLORS
Black PMS 185Cyan Magenta Yellow
CLIENT:
PROJECT:
FILE:
PROGRAM:
DATE:
DESIGNER:
Illustrator CS3
July 18, 2008
BL
NOTES:
Mechanical done at 100%
FILE PATH: JOBS/Jobs WIP/042669 Audiovox/Tactical Design/042669_D2Phone_HIJKLMNOPQRSTUVW.ai
/