Dura-Trel 11200 Operating instructions

Type
Operating instructions

Dura-Trel 11200 is a potting bench designed for outdoor use. It is made of durable PVC materials and is backed by a 20-year warranty against manufacturing defects. The bench has a spacious tabletop that is removable for easy cleaning, and it also features a shelf for additional storage. The potting bench is easy to assemble and comes with all the necessary hardware. It is a perfect addition to any garden or patio.

Dura-Trel 11200 is a potting bench designed for outdoor use. It is made of durable PVC materials and is backed by a 20-year warranty against manufacturing defects. The bench has a spacious tabletop that is removable for easy cleaning, and it also features a shelf for additional storage. The potting bench is easy to assemble and comes with all the necessary hardware. It is a perfect addition to any garden or patio.

Model#
11200
Assembly Instructions
Part # Description
max 5 x 3.5
1 4 sq. x 66" Back Left Post
2 4 sq. x 66" Back Right Post
3 4 sq. x 38" Front Left Post
4 4 sq. x 38" Front Right Post
5 1½ x 4 x 51½" Table Rail
6 1½ x 4 x 51½" Shelf Rail
7 1½ x 4 x 22" Side Rail
8 ¼ x 1½ x 25" Back Panel Slat
9 ⅞ x 1½ x 51½" Back Panel Top/Bottom Rail
10
⅞ x 1½ x 51½" Back Panel Center Rail
11 ⅞ x 1½ x 51½" Back Panel Center Shelf Rail
12 ⅞ x 1½ x 51½" Back Panel Bent Top
13 ⅞ x 1½ x 22" Table Top Brace
14 ⅞ x 3 x 24½" Table/Shelf Rail
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
15 1½ x 5½ x 43" Table Top Rail
IMPORTANT: Check boxes for Contents Listed
16 1½ x 5½ x 43" Shelf Rail
Check inside of parts as some parts are packaged
17 22" Table Top End Cap
inside of others
18 5½" Shelf End Cap
19 4" sq. Flat Post Cap
In the event of missing, damaged or defective parts
20 Hardware Bag
(includes:)
please call our customer service dept. at 1-877-258-6020
7" Shelf Hook
1¼" Painted Screw
When assembling components, place on a clean, flat
¾" Painted Screw
non-abrasive surface to avoid scratches
Super Glue Tube
Battery or Electric Drill with #2 phillips bit
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
www.dura-trel.com
sales@dura-trel.com
Tools Required
1-877-258-6020
1
1
General Information
2
3
1
14
8
2
2
4
1
2
1
1
Qty
1
Berkshire Potting Bench
4
1
2
2
4
1
2
16
36
1
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
1-877-258-6020
2
www.dura-trel.com
sales@dura-trel.com
Please call manufacturer direct with questions concerning missing or defective parts at Toll Free:
877
-258-6020.
Dura
-trel,
Inc. products are warranted to be free from manufacturing defects resulting in delaminating,
peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the
PVC to change to its natural color for a period of 20 years from the date of purchase.
Normal weathering is defined as exposure to sunlight and extremes of weather and atmosphere which
will cause any colored surface to gradually fade.
CONDITIONS NOT COVERED BY THIS WARRANTY:
A. Physical abuse, misuse, neglect, or improper storage.
B. Improper installation or installation not in strict adherence to the instructions written by Dura
-Trel,
Inc.
C. This warranty does not apply if materials are painted, varnished, or coated with any substance.
D. Dura
-Trel, Inc. is not responsible for damages to product during shipping.
E. Damage attributable to atmospheric pollutants, hail, lightning, hurricane, tornado, wind borne
objects, earthquake, fire, mildew, casualty, act of God, building or ground settlement, or subjection to
stress or weight.
CLAIMS AND REMEDIES:
If a Dura
-Trel, Inc. product is determined to have a manufacturing defect which is covered by this
warranty, Dura
-
Trel, Inc. will replace the material containing the defect (labor not included) F.O.B from
the point of manufacture. Dura
-trel, Inc. will not be responsible for any cost incurred in the removal or
reinstallation of the product.
Important:
An claims must be sent to the following address and should describe the defect claim.
Dura-Trel, Inc., P.O. Box 122, Sheboygan Falls, WI 53085
Dura
-Trel, Inc. reserves the right to discontinue or change its design, and or color. If the original color
or style is not available, Dura
-Trel, Inc. shall have the right to substitute a product designated by Dura-
Trel, Inc.
Dura
-Trel, Inc. shall not be liable for any incidental, special, or consequential damages arising out of
the use of these products
3
Berkshire Potting Bench
Starting at bottom of 66" back left post (part 1), insert one 51½" shelf rail (part 6) , one 51½" table rail (part
5), one 51½" back panel top/bottom rail (part 9), three back panel center rails (part 10) and one back panel
center shelf rail (part 11). Leave top two holes empty at this time. Insert free ends of all rails into 66" back
right post (part 2). Slide eight 25" back panel slat (part 8) through back panel center rails and into back
panel bottom rail. Separate back left and back right posts just enough to insert remaining back panel
top/bottom rail (part 9) and back panel bent top (part 12) into posts, inserting back panel slats into back
panel top rail. Using four ¾" screws per post, screw together potting bench back panel. Be sure all parts are
fully inserted into posts before securing. Using included super glue tube, glue 4" sq. flat post cap (part 19)
onto top of each post.
Berkshire Potting Bench
4
Insert one 51½" table rail (part 5) into 38" front right post (part 4). Insert one 51½" shelf rail (part 6) into 38"
front right post. Insert free ends of table and shelf rail into 38" back left post (part 3). Using four ¾" screws
per post, screw together potting bench front panel. Be sure all parts are fully inserted into posts before
securing. Using included super glue tube, glue 4" sq. flat post cap (part 19) onto top of each post.
Lay out four 43" table top rails (part 15) with pilot holes facing up. Set each 22" table top brace (part 13)
over pilot holes of table top rails. Using eight 1¼" screws per table top brace, fasten table top braces to table
top rails. Apply glue to inside edges of 22" table top end cap (part 17). Press end cap onto ends of table top
(DO NOT slide from end). Take care that end cap is flush with ends of table top and use a file to round off any
sharp edges.
Berkshire Potting Bench
5
Insert four 22" side rails (part 7) into posts of potting bench pack panel (from page 3). Insert three 24½"
table/shelf rails into table rail of back panel. Insert eleven table/shelf rails into shelf rail of back panel.
Insert free ends of side rails and table/shelf rails into corresponding holes of potting bench front panel
(from page 4). Using four ¾" screws per post, fasten together potting bench. Be sure all parts are fully
inserted before securing.
Berkshire Potting Bench
6
Apply glue to inside edges of 5½" shelf end cap. Press end cap onto ends of 43" shelf rail (part 16) (DO
NOT slide from end). Insert two 7" shelf hooks from hardware packet into pre
-
drilled holes and place shelf
on top of hooks.
Set table top assembly in middle of potting bench with braces facing down. The table top is designed to be
removable for easy cleaning with a standard garden hose and any type of household cleaner without
abrasives.
11200
Berkshire Potting Bench
1
4" sq. x 66" BPtB Back Lt Post 1.00
2
4" sq. x 66" BPtB Back Rt Post 1.00
3
4" sq. x 38" PtB Front Lt Post 1.00
4
4" sq. x 38" PtB Front Rt Post 1.00
5
1½ x 4 x 51½" PtB Table Rail 2.00
6
1½ x 4 x 51½" PtB Shelf Rail 2.00
7
1½ x 4 x 22" Rail 4.00
8
¼ x 1½ x 25" Slat 8.00
9
⅞ x 1½ x 51½" PtB Back T/B 2.00
10
⅞ x 1½ x 51½" PtB Back Cen 3.00
11
⅞ x 1½ x 51½" PtB Back CwH 1.00
12
⅞ x 1½ x 51½" PtB Bent Top 1.0 0
13
⅞ x 1½ x 22" PtB TableBrace 2.00
14
⅞ x 3 x 24½" Rail 14.00
15
1½ x 5½ x 43" PtB Table Top 4.00
16
1½ x 5½ x 43" Rail 1.00
17
22" End Cap 2.00
18
5½" End Cap 2.00
19
4" sq." Flat Cap 4.00
20
Hardware Bag 1.00
7" Shelf Hook 2.00
#6 - 1¼" Screw 16.00
¾" Painted Screw 36.00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Dura-Trel 11200 Operating instructions

Type
Operating instructions

Dura-Trel 11200 is a potting bench designed for outdoor use. It is made of durable PVC materials and is backed by a 20-year warranty against manufacturing defects. The bench has a spacious tabletop that is removable for easy cleaning, and it also features a shelf for additional storage. The potting bench is easy to assemble and comes with all the necessary hardware. It is a perfect addition to any garden or patio.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI