Panasonic NVHS960ECS Operating instructions

Brand: Panasonic

Model: NVHS960ECS

Category: Cassette players

Type: Operating instructions

This manual is also suitable for

NVHS960EGS

VQT8880

Before attempting to connect, operate or adjust this product,

please read these instructions completely.

Video Cassette Recorder

NV-HS960 Series

Operating Instructions

Bedienungsanleitung

Dear Customer

May we take this opportunity to thank you for purchasing this Panasonic Video Cassette Recorder.

We would particularly advise that you carefully study the Operating Instructions before attempting to operate the unit and

that you note the listed precautions.

Contents

Before Use

Controls and Components ............................................. 03

Checking the Accessories/Preparing the Remote

Control .......................................................................... 05

Cautions ........................................................................... 06

Warning and Important Information .............................. 07

Setting the Remote Control to Operate Your TV.......... 08

Connecting and Setting Up

Connecting and Preparations for a TV Equipped with

the Q Link Function ..................................................... 10

Connecting and Preparations for a TV Not Equipped

with the Q Link Function ............................................ 12

Connecting and Preparations for a TV Equipped with

the S-Video Socket ...................................................... 13

When You Insert a Video Cassette ........ 16

Playback

Playback .......................................................................... 17

≥ To Ensure High Playback Picture Quality

(3D DNR Function) ...................................................... 19

≥ To Ensure a Stable and Shake-Free Playback Picutre

Quality (TBC Function) ................................................ 19

Recording

Recording ........................................................................ 19

≥ To Immediately Record the Same TV Programme

That You Are Viewing on the TV

(Direct TV Recording) ................................................ 20

≥ To Make an S-VHS Recording on a Video Cassette .... 20

≥ To Record a VHS Tape with S-VHS Quality

(S-VHS Expansion Technology) ................................ 20

≥ To Select the Recording Duration and Perform

Timer Recording (OTR Recording) ............................ 21

≥ Linked Timer Recordings by external equipments .... 22

Timer Recording

Timer Recording ............................................................. 23

≥ To Programme with the On Screen Display (OSD) ... 23

≥ To Programme with the ShowView Function ............. 24

Other Timer Recordings and Convenient Functions .. 25

Tape Library System

Tape Library System....................................................... 28

≥ To Check the Tape Library Data ................................ 29

≥ To Manually Enter or Editing a Title or Category ....... 31

≥ To Delete the Tape Library Data................................ 32

≥ To Restore Deleted Tape Library Data ...................... 33

≥ To Demonstrate Tape Library System ....................... 33

Advanced Operations

Search Functions ............................................................ 34

≥ VISSlVHS Index Search System ............................. 34

≥ Intro-Jet Scan ............................................................. 34

Editing .............................................................................. 35

≥ Assemble Editing ....................................................... 35

≥ Album Function .......................................................... 36

≥ Insert Editing .............................................................. 37

≥ Audio Dubbing ........................................................... 38

≥ One-Touch Editing from a VHS-C, S-VHS-C or Digital

Movie Camera or VCR ................................................ 40

≥ One-Touch Editing from a Video-8/Hi8 Video Movie

Camera ....................................................................... 41

Connecting the VCR to a Decoder/

Connecting the VCR to a Stereo Amplifier ............... 42

Connecting the VCR to a Satellite Receiver or Digital

Receiver ....................................................................... 43

Various Settings

Tuning and Assigning the TV Stations Available in

Your Area to the Programme Positions

(Manual Tuning) ........................................................... 46

Restarting the Auto Setup or Download/

Resetting the VCR to the Shipping Condition .......... 51

Setting the VCR’s Clock ................................................. 52

Other Convenient Functions (Various Settings) .......... 53

≥ Settings for the Main Menu Item “Display” ................. 53

≥ Settings for the Main Menu Item “Functions” ............. 55

≥ Language Setting ....................................................... 57

≥ Country Setting .......................................................... 57

To Set the Subtitles .................................................. 48, 54

Helpful Hints

Glossary ........................................................................... 58

Before Requesting Service ............................................ 60

≥ Adjusting the Playback Picture .................................. 62

Specifications .................................................................. 63

°\

[

Í/I

S-VHS/S-VHS ET

DIRECT

TV REC

INSERT

A.DUB

3D DNR

INTRO-JET SCAN

TIMER REC

¥REC/OTR

CVC

EJECT

∑

;

TBC

S-VIDEO IN

AUDIO IN

AV3

^]_

a` bDc6 e

°f

°d

g°°N h kjil

EDIT/MONTAGE

AV1

(

)

NORMAL

AC IN

SECTEUR

S-VIDEO

OUT/

SORTIE

S-VIDEO

VIDEO

RF/

ANT

IN/

ENT

OUT/

SORTIE

L/G

R/D

8mm CONTROL/

CONTROLE 8mm

r s vt u

°m

°n

°xyz

°p

AV4 IN/ENT OUT/SORTIE

AUDIO

AV2

(

DECODER/DECODEUR/EXT

)

o q

Controls and Components/Bedienungselemente und

Anschlussbuchsen

SUBTITLE

TV/TEXT

VOLUME

REPLAY

OSD/DISPLAY

LIBRARY

;/D

DATE

CANCEL

SP/LP

AUDIORESET

TV ASPECT

INDEX

REC

VCR

OFF

PROG./CHECK

TIMER REC

INPUT SELECT

°°1

°°2

456

789

TRACKING/V-LOCK

°°3

MENU OK

EXIT

°°N

°Q

SHOW VIEW

TAPE AV LINK

°A

;

°°O

DIRECT TV REC

STILL ALBUM

VCR

SAT

SUBTITLE

TV/TEXT

VOLUME

REPLAY

OSD/DISPLAY

LIBRARY

;/D

AUDIORESET

TV ASPECT

INDEX

REC

VCR

INPUT SELECT

456

789

TRACKING/V-LOCK

DATE

CANCEL

SP/LP

PROG./CHECK

TIMER REC

°V

MENU OK

EXIT

SHOW VIEW

TAPE AV LINK

OFF

DIRECT TV REC

STILL ALBUM

VCR

SAT

SUBTITLE

TV/TEXT

VOLUME

REPLAY

OSD/DISPLAY

LIBRARY

;/D

CANCEL

SP/LP

AUDIORESET

TV ASPECT

INDEX

REC

VCR

PROG./CHECK

TIMER REC

INPUT SELECT

456

789

TRACKING/V-LOCK

MENU OK

EXIT

°°Y

°°X

rrr

DATE

OFF

SHOW VIEW

TAPE AV LINK

°°W

DIRECT TV REC

STILL ALBUM

VCR

SAT

° See page 4. (VCR Operation)

°°See page 8. (TV Operation)

°°Siehe Seite 66 unter „Bedienung des Videorecorders“.

°°Siehe Seite 70 unter „Bedienung des Fernsehgerätes“.

Keep this page open as you read through the Operating Instructions. Refer to it for the control and component names and

numbers which appear in the text.

Halten Sie diese Seite aufgeschlagen, während Sie die Bedienungsanleitung durchlesen. Auf diese Weise können Sie die

Lage von Bedienungselemente, Anschlussbuchsen und Bauteilen, deren Bezeichnungen und Nummern im Text erwähnt

werden, bequem überprüfen.

VCR Operation

When you want to operate the VCR, set the VCR/TV switch

P to “VCR”.

°2 Numeric buttons

To select the programme positions (1–99) of the VCR.

Example:

19:

To select the satellite programme positions.

Example:

SAT 9:

SAT19:

SAT129:

≥ 3-digit programme positions can be selected with this

remote control only in case of a satellite receiver that is

marked with (°

) on the enclosed list of compatible

satellite receivers.

To enter a ShowView number.

To enter numbers for various settings.

°A VCR 1/2 switch

Set to the “VCR 2” position when using two Panasonic

VCRs. (See page 56.)

°O SUBTITLE button

When receiving or playing back recordings of TV

programmes that are broadcast with subtitles via

Teletext, and also when playing back pre-recorded

cassettes with “Closed Caption” subtitles, you can make

the subtitles appear or disappear on the TV screen by

pressing this button.

≥ Every time you press this button, the “<:ON” indication

or “<:OFF” indication appears on the TV screen for a

few seconds. When you press this button to display the

“<:ON” indication, the subtitles are displayed on the

TV screen.

≥ After pressing this button so that the “<:ON” indication

appears, it may take a few moments until the subtitles

are displayed on the TV screen.

≥ Pressing this button also changes the setting of

“Subtitles” for “Display” on the Main menu accordingly.

Therefore, turning the subtitle function on or off is also

possible by changing the above setting on the Main

menu. (See page 54.)

SAT

0 1 9

SAT

2 9

SAT

°Q Infra-red transmitter

°V Child Lock Function buttons

(Convenient function to prevent unauthorized use)

This function deactivates all buttons on the VCR and the

remote control. Use this function, when you do not want

other people to operate the VCR.

To Activate the Child Lock Function:

1 Hold down the OK and the OFF (i) buttons V

simultaneously until the “!" hold” indication appears

in the VCR display.

≥ If you press a button while the Child Lock function is

on, the “!" hold” indication appears in the VCR

display to inform you that no operation is possible.

To Cancel the Child Lock Function:

1 Hold down the OK and the OFF (i) buttons V

simultaneously until the “!" hold” indication

disappears.

≥ If you disconnect the power cable, the Child Lock

function is automatically cancelled after the power

backup time of approximately 60 minutes has

elapsed.

≥ If you cannot cancel the Child Lock function, press

the EXIT button S and perform the operation step 1.

°\ Cassette compartment

°d Infra-red Remote Control Receiver window

°f VCR display

°m Video Input socket [VIDEO IN (AV4)]

This socket can be used for connection instead of AV3.

When the connection is made to AV4, press the INPUT

SELECT button 3 and select “A4”.

This cannot be used for the connection for performing the

Album Function.

°n S-Video Input socket [S-VIDEO IN (AV4)]

This socket can be used for connection instead of AV3.

When the connection is made to AV4, press the INPUT

SELECT button 3 and select “A4”.

This cannot be used for the connection for performing the

Album Function.

°p Video Output socket

To connect a Video cable to a TV or another unit.

°x Audio Input sockets [AUDIO IN (AV4)]

These sockets can be used for connection instead of

AV3. When the connection is made to AV4, press the

INPUT SELECT button 3 and select “A4”.

This cannot be used for the connection for performing the

Album Function.

Before Use

ENGLISH

Checking the Accessories/Preparing the Remote Control

Check that you have the accessories shown below .

∏ Operating

Instructions

∏ Satellite Receiver List

∏ S-VHS ET Sticker

(for cassette tape)

∏ RF lead to connect

VCR and TV

Inserting Remote Control Batteries

1 Slide off the battery cover.

2 Insert the batteries with the

polarity (+ and -)

correctly aligned.

3 Replace the battery cover.

≥ Do not heat or short-circuit the batteries.

≥ When you do not use the remote control for a long time,

take out the batteries and store them in a cool, dry

place.

If the Sliding Cover of the Remote

Control Becomes Detached

If the sliding cover of the remote control becomes

detached accidentally, fit it securely in place by placing it

on the top of the remote control at the position shown in

the illustration below, and pushing it down until it clicks

into position.

≥ It is not possible to fit the sliding cover in place by

pushing or sliding it on from the bottom end of the

remote control.

Notes for Battery Replacement:

≥ The service life of the batteries is approximately 1 year.

However, it varies considerably depending on the

frequency of use.

≥ When they are exhausted, replace them with two AA,

UM3, or R6 size batteries.

≥ When the batteries are exhausted, remove them

immediately and dispose of them correctly.

≥ Make sure that the batteries are inserted with the

polarity (+ and -) correctly aligned.

≥ Do not mix old battery with new battery.

≥ Do not mix different battery types, i.e. Alkaline and

Manganese.

≥ Do not use rechargeable (Ni-Cd) batteries.

∏ Batteries for the Remote

Control

∏ AC Mains lead

WrongCorrect

∏ S-Video cable

∏ Edit cable

∏ Remote Control

Be sure to read the cautions carefully before you operate this

VCR.

Avoid sudden changes in temperature

If the VCR is moved suddenly from a cold to a warm place,

condensation may form on the tape surface and inside the

VCR. If this happens, leave the VCR at room temperature for

at least 1 hour before operating it.

Avoid humidity and dust

Do not use the VCR in very humid or dusty places. This may

cause damage to its internal parts.

Do not cover the ventilation holes

The ventilation holes prevents excessive heat build-up inside

the VCR during extended periods of use. Do not block these

holes; especially avoid covering them with soft materials such

as paper or cloth.

Keep the VCR away from high temperatures

Keep the VCR away from extreme heat such as direct

sunlight, heating radiators, or closed automobiles.

Keep away from magnets and electromagnetic objects

Never bring a magnet or electromagnetic object close to the

VCR because this could adversely affect the performance of

the VCR. When using the VCR together with other

equipment, keep as much distance as possible between them

to prevent them from adversely affecting each other’s

performance.

No fingers or other objects inside

Touching internal parts of the VCR is dangerous, and may

seriously damage it. Do not attempt to disassemble the VCR.

There are no user serviceable parts inside.

Keep water away

Keep the VCR away from flower vases, tubs, sinks, etc.

Caution: If water or some other liquid is spilled into the VCR,

serious damage could occur. If you spill any liquid into the

VCR, consult qualified service personnel.

Lightning

To avoid damage by lightning, disconnect the aerial plug from

the VCR during lightning storms.

Cleaning the VCR

Wipe the VCR with a clean, dry cloth. Never use any cleaning

fluid or other chemicals. Also do not use compressed air to

remove dust.

Stacking

Install the VCR in a horizontal position and do not place

anything heavy on it.

Cautions

Video head clogging

The video heads record the picture signals on the tape during

recording and read picture signals from the tape during

playback. They are, therefore, of critical importance for the

picture quality. If the VCR is used for a very long time, these

heads may become dirty and clogged with dust and fine

particles from the tape coating. In such a case, the signals

can no longer be recorded correctly, and the playback picture

will be distorted accordingly. This is the case, for example, if

during the playback of a tape, which you know to have

excellent recording quality, the picture and sound quality are

inferior. When such a symptom occurs, have the recorder

checked by qualified service personnel.

Condensation may form in the following cases:

≥ If the VCR is in a room that was very cold before the heater

has just been turned on.

≥ If the VCR is in a room with steam or high humidity.

≥ If the VCR is brought from cold surroundings into a well-

heated room.

≥ The VCR is suddenly brought from cool surroundings, such

as an air-conditioned room or car, to a place which is hot

and humid.

Note:

≥ In any of the above-mentioned conditions, do not operate

the VCR for at least 1 hour.

This VCR is not equipped with a dew sensor.

Head cleaning by a service centre is not covered by

warranty.

Before Use

As this equipment gets hot during use, operate it

in a well ventilated place; do not install this

equipment in a confined space such as a book

case or similar unit.

IMPORTANT

Your attention is drawn to the fact that the recording of

pre-recorded tapes or discs or other published or

broadcast material may infringe copyright laws.

WARNING

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

FOR YOUR SAFETY

∫ DO NOT REMOVE OUTER COVER.

To prevent electric shock, do not remove cover. There are

no user serviceable parts inside. Refer all servicing to

qualified service personnel.

Remarks

1. This VCR is also capable of receiving SECAM type

broadcasting programmes (SECAM B/G) and recording/

playing back its colour television signals.

2. When a cassette which has been recorded on this VCR

is played back on a SECAM VCR, the picture may be

reproduced in black and white. When it is played back

on a PAL VCR without SECAM capability, the picture

may not be reproduced in normal colour.

3. When cassettes recorded on a SECAM VCR or SECAM

pre-recorded cassettes are played back on this VCR, the

picture may be reproduced in black and white.

4. This VCR is not designed for use in France, where a

SECAM VCR should be used instead.

Press the VCR-ON/OFF button 1 to switch the VCR from on

to standby mode or vice versa. In the standby mode, the VCR

is still connected to the mains.

HOWVIEW is a trademark of Gemstar Development

Corporation. The S

HOWVIEW system is manufactured

under licence from Gemstar Development Corporation.

If you dub still pictures from a conventional analogue video

movie camera or VCR, some picture distortion may occur in

the recorded picture.

Note:

≥ You will find the CE mark (conformity declaration for

Europe) on the shipping carton and on the rating plate (rear

side of the unit).

Warning and Important Information

Setting the Remote Control to Operate Your TV

This setting procedure allows you to operate the TVs of most

brands using the remote control supplied with this VCR.

≥ Some TV models cannot be operated with this remote

control.

Set the VCR/TV switch P to “TV”.

2 Look up your TV’s manufacturer in the list of TVs

compatible with the VCR’s remote control on the next

page.

3 While keeping the TV-ON/OFF button 1 pressed, use

the Numeric buttons 2 to enter the manufacturer’s code.

If there is more than one code listed for that

manufacturer, try the first code.

Be sure to enter the code in two digits.

Example: 01

4 Check whether you can operate the TV correctly with the

VCR’s remote control.

If the TV cannot be operated properly:

In step 3, enter the other code listed for that manufacturer

and repeat step 4.

TV Operation

The explanations below show you what functions individual

buttons have when the VCR/TV switch P is set to “TV”.

°°1 TV-ON/OFF button

To switch the TV on from standby mode (OFF) or vice

versa.

On some TVs it is only possible to switch the TV to

standby mode (OFF) with this button, but not on. In this

case, try to turn the TV on with one of the following

buttons:

Numeric buttons 2

AV button 3

Channel button N

°°2 Numeric buttons

To select the programme positions (1–99) on the TV.

°°3 AV button

To select the desired AV input on the TV.

°°N Channel button

To select the desired programme position (TV station) on

the TV.

°°O TV/TEXT button

To switch between normal TV mode and teletext mode.

°°W Teletext buttons

If your TV is equipped for Teletext reception, you can use

these buttons to change the teletext information

displayed on the screen and select desired information.

For details, refer to your TV’s operating instructions.

°°X TV ASPECT button

To switch the screen format between the wide-screen

and other formats.

°°Y VOLUME button

To adjust the volume of the TV.

The 3 Methods for Switching

to the AV Input on Your Panasonic TV

Your Panasonic TV uses one of three different methods for

switching between TV reception and the AV input(s). Perform

the operations steps listed for the switching methods A, B and

C below to determine which one your Panasonic TV uses.

A 1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3 to switch to the AV Input.

Each press of the AV button 3 switches between

“TV reception” and “AV Input(s)”.

B 1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

Colour bars for selecting the AV Input appear on

the TV screen.

3 Follow the instructions displayed on the TV screen

to select the desired AV Input from the displayed

colour bars for the AV Input by pressing the

corresponding colour button J (red) :, DATEi

(green) ;, ONi (yellow) G or OFFi (blue) F on

the remote control.

C 1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

The last previously selected AV Input indication

appears on the TV screen. The indications for

selecting another AV Input also appear,

but they disappear a few seconds later.

3 Before the indications for selecting another AV

Input disappear, press the I button :, DATEj

button ;, ONj button G or OFFj button F to

select the desired AV input.

With the following four buttons, you can move and

select as follows:

I :: Move left

DATEj ;: Move down

ONj G: Move up

OFFj F: Move right

Before Use

List of TVs Compatible with the VCR’s

Remote Control

Manufacturer Code

Panasonic 01–04

AIWA 35

AKAI 27, 30

BLAUPUNKT 09

BRANDT 10, 15

BUSH 05, 06

CURTIS 31

DESMET 05, 31, 33

DUAL 05, 06

ELEMIS 31

FERGUSON 10

GOLDSTAR/LG 31

GOODMANS 05, 06, 31

GRUNDIG 09

HITACHI 22, 23, 31, 40, 41, 42

INNO HIT 34

IRRADIO 30

ITT 25

JVC 17, 39

LOEWE 07

METZ 28, 31

MITSUBISHI 06, 19, 20

MIVAR 24

NEC 36

NOKIA 25–27

NORDMENDE 10

ORION 37

PHILIPS 05, 06

PHONOLA 31, 33

PIONEER 38

PYE 05, 06

RADIOLA 05, 06

SABA 10

SALORA 26

SAMSUNG 31, 32

SANSUI 05, 31, 33

SANYO 21

SBR 06

SCHNEIDER 05, 06, 29, 30, 31

SELECO 06, 25

SHARP 18

Manufacturer Code

SIEMENS 09

SINUDYNE 05, 06, 33

SONY 08

TELEFUNKEN 10–14

THOMSON 10, 15

TOSHIBA 16

WHITE WESTINGHOUSE 05, 06

Connecting and Preparations for a TV Equipped with the

Q Link Function

Connections and preparations for a TV equipped with the “Q Link”°

function and equipped with a 21-pin Scart socket.

For the connections and preparations for a TV

equipped with the “DATA LOGIC”°

, “Easy Link”°

, “Megalogic”°

“SMARTLINK”°

function and with a 21-pin Scart socket, also read from this page.

For details about the connections, also read TV’s operating instructions.

Be sure to keep both the TV and VCR switched off until all connections have been made.

For your safety, be sure not to connect or handle the equipment with wet hands.

Aerial (not supplied)

Aerial Input

socket

Aerial lead

(not supplied)

with Q Link function

(not supplied)

AC Input

socket

Aerial Output

socket

Aerial Input

socket

21-pin Scart

socket

To AC mains socket

RF coaxial cable

(supplied)

Fully-wired 21-pin Scart

cable (not supplied)

AC mains lead

(supplied)

Hints:

≥ If the TV set is equipped with a 21-pin Scart socket that features Y/C signal separation, set the Normal/S-Video Output switch

w to “S-VIDEO OUT” so that you can record or play back in the S-VHS format and use a

fully-wired 21-pin Scart cable (not

supplied) to connect the VCR to the TV.

≥ Q Link is an advanced system that offers a range of convenient functions such as automatic copying of the tuning position of

all available TV stations (in the same order as they are programmed on the TV) into your VCR’s memory (this is called

Download) if you connect the VCR to your TV with a

fully-wired 21-pin Scart cable (not supplied). Depending on the

manufacturer, the equivalent of the Q Link function has a different name and may not work exactly the same.

“Q Link” is a registered trademark of Panasonic.

“DATA LOGIC” is a registered trademark of Metz.

“Easy Link” is a registered trademark of Philips.

“Megalogic” is a registered trademark of Grundig.

“SMARTLINK” is a registered trademark of Sony.

For details, refer to your TV’s operating instructions or consult your dealer.

≥ Unlike in most commercially sold 21-pin Scart cables, in

fully-wired 21-pin Scart cables all 21 pins of one plug are connected

to the matching pin of the plug on the other end of the cable. This type of cable is necessary for the Preset Download

function to work.

21-pin Scart

socket

Connecting and Setting Up

Preset Download Function

The Preset Download function automatically copies the tuning

position of all available TV stations into the VCR’s memory

when you connect the VCR using a

fully-wired 21-pin Scart

cable to a TV

equipped with the Q Link function.

To Simultaneously Set Up this VCR with a

New TV

Perform the following operation steps exactly as described to

ensure that the Preset Download function works correctly.

√

First of all, make sure that the VCR is switched off.

1 Switch the TV on.

The TV starts to tune all available TV stations and to

adjust the clock.

(This is called Auto Setup function.)

√ When the TV has finished its

own auto setup, the VCR is

automatically switched on, and

the downloading of the setup

data from the TV to the VCR

starts. (Applicable to TVs with

“Q Link” or “DATA LOGIC”

function)

If your TV is equipped with the

“Easy Link”, “Megalogic” or

“SMARTLINK” function, the

Country setting menu appears

on the TV screen before

downloading. Press the Cursor

buttons (3421) R to select

the desired country. Then, press

the OK button T and the

downloading automatically starts.

√ The VCR’s Auto Setup

(Downloading) is complete

when the programme

position and the current

time appear in the VCR

display.

Note:

≥ If you accidentally switch on the VCR before the TV,

downloading of the setup data from the TV may not be

performed correctly. In this case, follow the operation steps

below.

1 Wait until the Auto Setup is complete on both the TV and

the VCR.

2 Press the MENU button U to display the OSD Main

menu on the TV screen.

3 Press the Cursor buttons (3421) R to select

“Tuning” and then “Download”.

4 Press the OK button T twice. Downloading of the setup

data from the TV to the VCR starts.

5 When the programme position and the current time

appear in the VCR display, downloading is complete.

On Screen Display

Hints:

≥ If you use a Panasonic TV and perform the operation step

1, starting the downloading of the setup data will

automatically display the “Download” indication. However,

in case of a TV of another make, the “Download” indication

may not appear. In this case, select the AV input on your

TV if you want to see the “Download” indication.

≥ If you select “Schweiz”, “Suisse” or “Svizzera” on the

Country setting menu, the Display setting menu appears

automatically to let you set the item “Power save” to “ON”.

In this setting, the VCR’s power consumption is minimised

when it is off (Standby mode). To turn the VCR on, keep

the VCR-ON/OFF button 1 pressed on the VCR main unit.

It is not possible to turn it on with the remote control.

To Set Up this VCR with a TV Already in

Use

1 Switch the TV on.

2 Select the AV input on your TV.

3 Set the VCR/TV switch P to “VCR”.

4 Press the VCR-ON/OFF button

1 to switch the VCR on.

Downloading of the setup data

starts automatically. (Applicable

to TVs with “Q Link” or “DATA

LOGIC” function)

If your TV is equipped with the

“Easy Link”, “Megalogic” or

“SMARTLINK” function, the

Country setting menu appears

on the TV screen before

downloading. Press the Cursor

buttons (3421) R to select

the desired country. Then, press

the OK button T and the

downloading automatically starts.

√ When the programme position

and the current time appear in

the VCR display, the VCR’s

Auto Setup (Downloading) is

complete.

Hint:

≥ If you select “Schweiz”, “Suisse” or “Svizzera” on the

Country setting menu, the Display setting menu appears

automatically to let you set the item “Power save” to “ON”.

In this setting, the VCR’s power consumption is minimised

when it is off (Standby mode). To turn the VCR on, keep

the VCR-ON/OFF button 1 pressed on the VCR main unit.

It is not possible to turn it on with the remote control.

Download

Download in

progress,

please wait.

Position 67

Indication during downloading

VCR display

Programme

position

Indication when the

current time is 16:45

Country

België

Belgique

Belgien

Danmark

España

France

Italia

Nederland

Norge

Deutschland

Österreich

Portugal

Suomi

Sverige

Schweiz

Suisse

Svizzera

others

Menu for Country setting

CVC

Programme

position

Indication when the

current time is 16:45

CVC

Download

Download in

progress,

please wait.

Position 67

Country

België

Belgique

Belgien

Danmark

España

France

Italia

Nederland

Norge

Deutschland

Österreich

Portugal

Suomi

Sverige

Schweiz

Suisse

Svizzera

others

Menu for Country setting

Indication during downloading

Connecting and Preparations for a TV Not Equipped with the

Q Link Function

Aerial (not supplied)

Aerial lead

(not supplied)

TV (not supplied)

Aerial Input

socket

To AC Mains socket

RF Coaxial cable (supplied)

≥ Must be connected to

watch TV channels.

AC Mains lead

(supplied)

or Method 2.

If you are connecting your VCR to a TV using only RF coaxial cable, then follow the

steps below. (RF Connection)

After completing the above connections, proceed to the Auto Setup page (Page 15).

Aerial (not supplied)

Aerial Input

socket

21-pin Scart

socket

Aerial lead

(not supplied)

TV (not supplied)

AC Input socket

Aerial Output

socket

Aerial Input

socket

21-pin Scart

socket

To AC Mains socket

RF Coaxial cable (supplied)

≥ Must be connected to

watch TV channels even if

21-pin Scart cable is used

to connect VCR to TV.

AC Mains lead

(supplied)

21- Scart cable to AV1

(not supplied)

Method 1.

If you are connecting your VCR to a TV using RF coaxial cable and 21-pin Scart cable, then

follow the steps below. (AV Connection)

After completing the above connections, proceed to the Auto Setup page (Page 14).

Aerial Input

socket

AC Input socket r

Aerial Output

socket

Connecting and Setting Up

Connecting and Preparations for a TV Equipped with the

S-Video Socket

Connections and preparations for a TV with S-Video socket.

This VCR uses the S-VHS format that makes it possible to obtain high resolution and high picture quality by using the high-

performance S-VHS video cassette tapes.

The conventional video sockets of VCRs output (input) a combination of the luminance signal (Y) and colour signal (C) which

are recorded on the video tape. The new S (Separate)-Video Socket allows separate transmission of signals in order to obtain

clearer pictures.

The connection with the S-Video Cable can also be used for playback of a tape that was recorded in the conventional VHS

system. The “S” in the “S-Video Socket” stands for “SEPARATED Y/C” not for “S-VHS”.

Be sure to keep both the TV and VCR switched off until all connections have been made.

For your safety, be sure not to connect or handle the equipment with wet hands.

After completing the above connections, proceed to the Auto Setup page (Page 14).

Aerial Input

socket

AC Input

socket

AC Mains lead

(supplied)

S-Video

Output

socket o

Aerial Output

socket

Audio Output

sockets

Aerial (not supplied)

Aerial lead

(not supplied)

Audio Input

sockets

Aerial Input

socket

S-Video Input

socket

To AC Mains socket

Audio cables

(not supplied)

RF Coaxial cable

(supplied)

S-Video cable

(supplied)

TV with S-Video

Input socket

(not supplied)

Tuning

Pos Name Ch

1 ARD 1

2 ZDF 2

3N3 19

4 HR3 26

5 BR3 18

6 RB3 3

7 SFB3 36

8SW3 29

9 WDR3 17

10 MDR3 32

Pos Name Ch

11 ORB 35

12 RTL+ 4

13 SAT1 5

s s s s s s s s

15 s s s s s s s s

16 s s s s s s s s

17 s s s s s s s s

18 s s s s s s s s

19 s s s s s s s s

20 s s s s s s s s

If you are connecting your VCR to a TV using Method 1,

follow the operations explained below.

Auto Setup Function

The Auto Setup function automatically tunes all available TV

stations and sets the VCR’s clock to the current date and

time. If the tuning and time/date settings are not correct,

performing timer recordings is not possible.

01 Switch the TV on.

02 Select the AV input on your TV.

03 Set the VCR/TV switch P to “VCR”.

04 Press the VCR-ON/OFF button

1 to switch the VCR on.

The Country setting menu

appears on the TV screen.

05 Press the Cursor buttons

(3421) R to select the

country where you are using the

VCR.

06 Press the OK button T and the

VCR’s Auto Setup automatically

starts and tunes all available TV

stations and also sets the clock.

This takes about 5 minutes.

07 When the indication shown on

the right appears on the VCR

display, the Auto Setup is

complete.

08 Press the MENU button U for

more than 5 seconds so that

the RF output channel

number appears on the VCR

display.

The initial setting is channel 36.

09 Press the Numeric button “0”

2 so that the displayed RF

output channel number

changes to “– –”.

10 Press the OK button T to conclude the setting.

√ To Cancel the Auto Setup Before It Has Finished

Press the EXIT button S.

On Screen Display

Indication during Auto Setup

Country

België

Belgique

Belgien

Danmark

España

France

Italia

Nederland

Norge

Deutschland

Österreich

Portugal

Suomi

Sverige

Schweiz

Suisse

Svizzera

others

Menu for Country setting

Hint:

≥ If you select “Schweiz”, “Suisse” or “Svizzera” on the

Country setting menu, the Display setting menu appears

automatically to let you set the item “Power save” to “ON”.

In this setting, the VCR’s power consumption is minimised

when it is off (Standby mode). To turn the VCR on, keep

the VCR-ON/OFF button 1 pressed on the VCR main unit.

It is not possible to turn it on with the remote control.

When the clock setting menu appears after Auto Setup

has finished:

1 Press the Cursor buttons (3421) R to set the correct

time and date.

2 Press the OK button T to conclude the setting.

3 Press the EXIT button S to exit the On Screen Display.

To Confirm that the TV Stations Have Been

Tuned Correctly by the Auto Setup

Function

1 Press the MENU button U to

display the OSD Main menu

on the TV screen.

2 Press the Cursor buttons

(3421) R to select

“Tuning” and “Manual” in this

order.

3 Press the OK button T to

display the list of tuned TV

stations and confirm that all

available TV stations have

been set correctly.

4 Press the EXIT button S to exit the On Screen Display.

When the station names and/or channel numbers have

not been set correctly:

See page 46 for details.

When no station has been set, confirm all connections of

the VCR again and restart the Auto Setup.

(See page 51 for details.)

Auto-Setup

in progress,

please wait.

Ch 21

Indication after changing the RF

output channel to “– –”

Indication when the RF output

channel is 36 (example)

Main menu

Timer record

Tape Library

Display

Tuning

Clock

Functions

Language

Country

Satellite

Manual

Auto-Setup Restart

Download

Shipping condition

List of tuned TV stations

(example)

VCR display

Programme

position

Indication when the

current time is 16:45

CVC

Connecting and Setting Up

If you are connecting your VCR to a TV using Method 2,

follow the operations explained below.

To be able to watch the VCR picture on the TV, RF

connection requires the video playback channel to be set on

the TV.

01 Switch the TV on.

02 Select an unoccupied programme position (which is not

tuned to a TV station).

If you are using a Panasonic TV, select programme

position “0”.

03 Set the VCR/TV switch P to “VCR”.

04 Press the VCR-ON/OFF button 1 to switch the VCR on.

05 Press the MENU button U for

more than 5 seconds.

The number of the RF output

channel appears on the VCR

display.

The initial setting is channel 36.

06 Tune your TV until the test

pattern shown on the right

appears on the TV screen.

Now, the setting of the RF

output channel is complete.

≥ As the tuning method differs

depending on the TV you are

using, refer to your TV’s

operating instructions for

details about tuning.

07 Press the OK button T.

The Country setting menu

appears on the TV screen.

08 Press the Cursor buttons

(3421) R to select the

country where you are using the

VCR.

09 Press the OK button T and the

VCR’s Auto Setup automatically

starts and tunes all available TV

stations and also sets the clock.

This takes about 5 minutes.

≥ If you select “Schweiz”,

“Swisse” or “Svizzera” on the

Country setting menu, see

page 14.

10 When the indication shown on

the right appears on the VCR

display, the Auto Setup is

complete.

√ To Cancel the Auto Setup Before It Has Finished

Press the EXIT button S.

VCR display

Indication when the RF output

channel is 36 (example)

On Screen Display

Panasonic

VCR

Ch:36

Indication of the test pattern

Country

België

Belgique

Belgien

Danmark

España

France

Italia

Nederland

Norge

Deutschland

Österreich

Portugal

Suomi

Sverige

Schweiz

Suisse

Svizzera

others

Auto-Setup

in progress,

please wait.

Ch 21

Indication during Auto Setup

Menu for Country setting

When the clock setting menu appears after Auto Setup

has finished:

See page 14.

To Confirm that the TV Stations Have Been

Tuned Correctly by the Auto Setup

Function

See page 14.

If the Picture on the TV’s Video Playback

Channel Is Distorted

If, after setup, you select the video playback channel

on the TV and view a TV programme on a programme

position selected on the VCR, some interference may occur

in certain cases. If this happens, you can minimise the

distortion by changing the RF output channel on the VCR to

another number. Follow the operations below.

1 Set the VCR/TV switch P to “VCR”.

2 Press the MENU button U for more than 5 seconds.

The number of the RF output channel appears on the

VCR display.

The initial setting is channel 36.

3 Press the Numeric buttons 2 to change the RF output

channel.

Enter a channel number which differs by 2 or 3 from the

one initially set number. For example, as the original

number is 36, enter 39.

4 Press the OK button T to conclude the setting.

Note When You Have Changed the RF Output Channel:

After changing the RF output channel to a different number,

be sure to retune your TV to the VCR’s new RF output

channel. (For details about tuning, refer to your TV’s

operating instructions.)

1 Press the MENU button U for more than 5 seconds.

2 When the test pattern shown on

the right appears sharp and

clear on the TV screen, the

tuning is complete.

3 Press the EXIT button S to exit the On Screen Display.

Indication when the RF output

channel is 36 (example)

Indication after changing the RF

output channel to 39 (example)

Panasonic

VCR

Ch:39

Test pattern indication

Programme

position

Indication when the

current time is 16:45

CVC

Checking tape number...

Please wait !

Content of tape: 5 Page 1/2

Football

We 5.04.00

ZDF (18:58)

We 19.04.00

¢¢¢03 (19:08) Ch 3

Sa 29.04.00

¢¢¢¢¢ (19:18)

Fr 12.05.00

Title

Date/Category

: Subtitles

Sports

News

Movies

Music

Tape ID could not

be detected

When You Insert a Video Cassette

The Tape Library System makes it easy to check what programmes are recorded on the inserted tape and lets you quickly

select a programme for playback. For further details about the Tape Library System, see page 28.

When you insert a cassette

with an erasure prevention tab:

As soon as you insert the cassette, the Cassette Number Check starts

automatically. Wait a few moments until this check is completed.

On Screen Display VCR display

When you insert a cassette without

an erasure prevention tab:

As soon as you insert the cassette,

playback starts and the cassette

number appears on the VCR display

for several seconds. However, the

cassette number and the cassette’s

contents (recorded programmes)

do not appear on the On Screen

Display.

(When loading cassette No. 5.)

When inserting a cassette that

was recorded on this VCR:

When the Cassette Number Check

is completed, the cassette number

and the cassette’s contents

(recorded programmes) appear on

the On Screen Display, and the

cassette number appears on the

VCR display.

(When loading cassette No. 5.)

To select a

programme

on the

inserted

cassette

and start

playback,

see page

29.

The cassette number and tape contents are

not displayed for the following types of

cassettes:

a. New (never used) cassettes.

b. Cassettes recorded on another VCR.

c. Cassettes whose cassette number was

deleted from the Library data.

d. Certain other kinds of cassettes.

e. Cassettes which do not have a programme

recorded for at least 15 munites.

(25 minutes in the EP mode.)

In the above cases, the following indications

appear:

(This indication appears for

several seconds.)

(This indication appears for

several seconds.)

To perform playback, recording or some other

function, operate the VCR for the desired

function.

If you want to cancel the

Cassette Number Check

midway:

Press the Play I, Stop 9,

EJECT Z or VCR-ON/OFF

button 1 after the check

has started.

≥ No Tape Library data

appears if you cancel the

Cassette Number Check.

(See page 29.)

≥ If you cancel the Cassette

Number Check midway

and then preform

recording, a different

cassette number may

additionally be recorded

on the cassette. However,

this VCR will

automatically cancel the

added cassette number(s)

when you play back the

tape from the beginning.

To perform playback

without making use

of the Tape Library

functions, recording

or some other

function, press the

EXIT button S to

make the Tape

Library indications

disappear, and then

operate the VCR for

the desired function.

Pressing the EXIT

button S is

necessary even if

the TV is not turned

on.

Playback

Preparations

≥ Confirm that the VCR is on.

≥ Confirm that the TV is on and the VCR viewing channel is

selected.

≥ Insert a recorded video cassette.

As soon as the cassette is inserted, the Cassette Number

Check starts. Wait a few moments until it is completed.

(See page 16.)

For Normal Playback:

Press the Play button I.

For Cue Playback:

During playback, tap the Fast Forward button H.

≥ To return to normal playback, press the

Play button I.

≥ If you press and hold down the Fast

Forward button H, cue playback continues

for as long as you keep the button pressed.

For Review Playback:

During playback, tap the Rewind button 8.

≥ To return to normal playback, press the

Play button I.

≥ If you press and hold down the Rewind

button 8, review playback continues for as

long as you keep the button pressed.

For Still Playback:

During playback, press the Pause/Slow button 7.

≥ To return to normal playback, press the

Play button I or the Pause/Slow button 7.

For Slow Playback:

During playback, keep the Pause/Slow button 7 pressed

for 2 seconds or more.

≥ To return to normal playback, press the

Play button I.

Fast-forwarding or Rewinding the Tape:

To fast-forward the tape:

Press the Fast Forward button H in the stop mode.

To rewind the tape:

Press the Rewind button 8 in the stop mode.

≥ To stop fast-forwarding or rewinding, press the Stop button

≥ To briefly view the picture during fast-forwarding or

rewinding, press and hold down the corresponding button.

≥ You can also perform same operation by turning the Shuttle

Ring clockwise or counterclockwise.

To Stop Playback

Press the Stop button 9.

Notes:

≥ Cue, review or slow playback will be automatically

cancelled after 10 minutes, and still playback after

5 minutes.

≥ During playback function other than normal playback,

horizontal noise bars may appear in the picture, the colour

of the picture may be unstable, or the picture may be

otherwise distorted.

When you play back a tape recorded in the LP mode, the

picture may be in black and white.

When you play back a tape recorded in the EP mode, the

picture and the sound may be distorted.

However, these are not malfunctions.

To Change the Playback Speed

1 Press the Pause/Still button i on the VCR.

2 Rotate the Shuttle Ring j.

To Locate Precisely the Desired Moment in

a Scene

1 Press the Pause/Still button i on the VCR.

2 Turn the Jog Dial k.

To Select the Desired Sound Mode during

Playback

Press the AUDIO button ? during

playback.

Every time you press this button, the audio output mode

changes as follows:

VCR display

ForwardBackward

Backward Forward

On Screen Display

Audio Level (Stereo)

–

40 25 12 3 0 3 6 9 r12

Stereo Left Right

Normal audio

track (Mono)

≥ Repeatedly pressing this button changes the indication in

the following order:

To Stop Midway:

Press the Stop button 9.

To Play Back NTSC Video Cassettes on

Your PAL TV

(Quasi-NTSC Playback Function)

This VCR allows playback of tapes recorded in the NTSC

system on a normal PAL system TV with the same operations

as usual.

On some TVs, however, the playback picture may roll up or

down.

≥ If your TV has a V-HOLD control or equivalent adjustment

function, use it to try to stop the picture movement.

Convenient Automatic Functions

VCR Auto Power On

When you insert a video cassette, the VCR switches on

automatically.

Auto Playback Start

When you insert a video cassette with a broken erasure

prevention tab, playback start automatically without having to

press the Play button I.

VCR-off Playback

When the VCR is off, an inserted cassette can be played

back by pressing the Play button I.

Auto Rewind

When the tape reaches the end, the VCR automatically

rewinds it to the beginning.

≥ This function does not work during timer recording and

OTR.

Automatic Switching Off and Ejection

When the VCR is switched off, and inserted cassette can be

ejected simply by pressing the EJECT button Z. The VCR

will eject the cassette and automatically turn itself off again.

To Eject the Video Cassette Using the

Remote Control

Keep pressing the Stop button 9 for at least 3 seconds.

To Play Back a Recorded Part Repeatedly

Press the Play button I on the remote control for more than

5 seconds.

The “R” indication appears on the On Screen Display.

≥ If “OSD” is set to “OFF” (See page 53), the “R” indication

will not appear in repeat playback mode.

To Cancel the Repeat Playback Mode:

Press the Stop button 9.

To Rewind the Tape a Little to View the

Same Scene Again (Replay Function)

If you want to view the same scene again, for example

because you could not catch clearly what a person said,

simply press the REPLAY button 4, to rewind the tape a little

from its present position and play it back again.

The direction in which the tape is rewound depends on what

playback mode the VCR is in when you press the REPLAY

button 4.

≥ If you press the REPLAY button 4 when the VCR is in the

stop, rewind, fast-forward, slow playback, or standby (Off)

mode, the Replay function does not work.

During Normal Playback, Cue Playback and Still

Playback:

When you press the REPLAY button 4, the VCR switches

over to the review playback mode for a few seconds and then

resumes normal playback.

During Review Playback:

When you press the REPLAY button 4, the VCR briefly

switches over to Cue playback and then plays back at normal

speed in forward direction from the point where the REPLAY

button 4 was pressed.

To Stop Playback Automatically

(Playback Off Timer Function)

If you set the playback duration, the playback will stop

automatically.

After the set playback time has elapsed, the VCR

automatically stops playback and switches off.

To Activate the Playback Off Timer Function:

During normal playback, press the Play button I

on the VCR

for more than 2 seconds to put the VCR in the Playback Off

Timer mode.

After that, press the Play button I on the VCR repeatedly

until the desired playback duration is displayed on the VCR

display.

0:00.29

Indication of the Repeat

Playback mode

Beginning of Tape End of Recorded Part

Repeat Playback

Control Signal

Interruption

(at least 5 sec.)

PLAY

REWIND

(min.)

240

(min.)

180

(min.)

120

(min.)

Counter display

(normal playback mode)

Recording

To Ensure High Playback Picture

Quality (3D DNR Function)

To activate the 3-Dimensional Digital Noise Reduction

(3D DNR) function, press the 3D DNR button h, so that the

3D DNR lamp is lit.

≥ When the 3D DNR function is activated, the 3D DNR lamp

is lit.

≥ We recommend that you leave this function activated for

normal use of the VCR. However, when performing editing,

press the 3D DNR button h to turn this function off so that

the 3D DNR lamp is not lit, to ensure editing with optimal

picture quality.

≥ The 3D DNR function does not work during playback of a

video cassette recorded in the NTSC system.

To Ensure a Stable and Shake-

Free Playback Picutre Quality

(TBC Function)

TBC stands for Time Base Corrector.

This function improves the horizontal shaking and the stable

distortion in the vertical lines which tend to take place when

tapes are played back.

≥ When the TBC function is activated, the TBC lamp is lit.

≥ We recommend that you leave this function activated for

normal use of the VCR.

≥ The TBC function does not work during playback of a video

cassette recorded in the NTSC system.

≥ When you cannot ensure high playback picture quality,

press the TBC button ` to cancel this function so that the

TBC lamp is turned off.

≥ When switching the TBC function, the picture and the

sound may be distorted.

However, these are not malfunctions.

Recording

Preparations

≥ Confirm that the VCR is on.

≥ Confirm that the TV is on and the VCR viewing channel is

selected.

≥ Set the VCR/TV switch P to “VCR”.

Operations

1 Insert a video cassette with an intact erasure

prevention tab.

≥ As soon as the cassette is inserted, the Cassette

Number Check starts. Wait a few moments until it is

completed. (See page 16.)

≥ If it has already been inserted, press the VCR-ON/

OFF button 1 to turn the VCR on.

2 Select the TV station using the

Channel buttons N.

≥ It is also possible to select by

pressing the Numeric buttons 2.

3 Press the REC (REC/OTR) button J

(g) to start recording.

4 Press the Stop button 9 to stop recording.

To Select the Desired Tape Speed

Press the SP/LP button E before recording.

≥ SP provides standard recording time

and optimum picture quality.

LP provides double recording time with

slightly reduced picture quality.

EP provides triple recording time with slightly reduced

picture quality.

When the recording starts in the EP mode, “EP” indication

on the VCR display blinks for about 8 seconds.

To Pause Recording

Press the Pause/Slow button 7 during

recording.

Press it again to continue recording.

To View One TV Programme while

Recording Another TV Programme

After pressing the REC button J to start recording, select on

your TV the programme position of the TV programme that

you want to view.

Notes:

≥ When playing back an E300 cassette recorded in the LP or

EP mode, some picture distortion may occur. However, this

is not a malfunction.

≥ The recording pause mode will be automatically cancelled

after 5 minutes and return to the stop mode.

≥ The tape recorded in the EP mode on this VCR cannot be

played back on the other VCR without EP mode function.

≥ On the other VCR (even with EP mode function), when you

play back the tape recorded in the EP mode, the picture

may be distorted. However, this is not a malfunction.

REC

VCR display

To Immediately Record the Same

TV Programme That You Are

Viewing on the TV

(Direct TV Recording)

This function allows you to immediately start recording the

same programme that you are viewing on the TV.

The programme position selected on the VCR automatically

changes to that of the TV programme that you are viewing on

the TV. When you stop the recording, the VCR automatically

switches back to the previously selected programme position.

Conditions for correct operation of the Direct TV Recording

function:

≥ Your TV must be equipped with the “Q Link” function.

≥ The VCR must be connected to the TV via a fully-wired

21-pin Scart cable.

To Perform Direct TV Recording:

1 Insert a video cassette with an intact erasure

prevention tab.

2 Press the DIRECT TV REC button 6.

≥ Recording of the TV programme that you are viewing

on the TV starts.

≥ In some cases, it may not be possible to change the

programme position on the TV during Direct TV

Recording.

≥ Do not press the AV LINK button B during Direct TV

REC, otherwise the recording may not be performed

correctly.

3 Press the Stop button 9, to stop recording.

To Display the Approximate Remaining

Tape Time

The remaining tape time can be displayed in the VCR display.

1 Press the TAPE button C and select the corresponding

cassette tape length.

See page 53.

2 Press the OSD/DISPLAY button 5 repeatedly until the

Remaining Tape Time appears on the VCR display.

≥ Pressing the OSD/DISPLAY button 5 once makes the

On Screen Display appear; after that, pressing it

repeatedly changes the indication in the following

order:

For certain cassettes, the remaining tape time may not be

displayed correctly.

Clock Counter

Remaining Tape Time

To Make an S-VHS Recording on

a Video Cassette

For recordings that you intend to play back on this VCR or

another S-VHS VCR, we recommend that you record in the

S-VHS format to take advantage of this system’s superior

picture quality. Be sure to use a video cassette bearing the

S-VHS logo.

Insert a S-VHS cassette so that the S-VHS indicator is lit.

Recording is performed in the S-VHS format.

≥ When a cassette that was recorded in the S-VHS format is

played back on a VHS VCR without S-VHS quasi playback

function, noisy playback picture will appear.

If you want to make a recording in the VHS format in order to

play it back on a VHS VCR, press the S-VHS/S-VHS ET

button a, so that the S-VHS indicator goes out.

≥ Once a setting is selected, it remains in effect until the

power is turned off.

Note:

≥ When you set “Video system” on the Manual tuning menu

or “TV system” on the Functions menu to “MESECAM” (see

pages 48 and 55), recording is automatically made in the

VHS format even if the S-VHS indicator is lit.

To Record a VHS Tape with

S-VHS Quality

(S-VHS Expansion Technology)

S-VHS ET stands for Super-VHS Expansion Technology.

This function allows recording and playback in S-VHS picture

quality on a normal VHS cassette.

Insert a VHS cassette and press the S-VHS/S-VHS ET button

a, so that the S-VHS ET indicator is lit.

Recording is performed in the S-VHS picture quality.

≥ When a cassette that was recorded using S-VHS ET

function is played back on a VHS VCR without S-VHS

quasi playback function, noisy playback picture will appear.

Notes:

≥ We recommend that you use video cassettes other than

type E300.

≥ When you set “Video system” on the Manual tuning menu

or “TV system” on the Functions menu to “MESECAM” (see

pages 48 and 55), recording is automatically made in the

VHS format even if the S-VHS ET indicator is lit.

≥ If you want to record and playback with highest possible

picture quality or store the cassettes for a long time, we

recommend that you use S-VHS cassettes and record in

the S-VHS format.

Recording in this format is only possible in the

SP mode.

If LP or EP mode is selected while setting up a timer

recording, the S-VHS ET indicator turns off and

S-VHS ET is cancelled.

Page is loading ...

Panasonic NVHS960ECS Operating instructions

Brand: Panasonic

Model: NVHS960ECS

Category: Cassette players

Type: Operating instructions

This manual is also suitable for

NVHS960EGS

Download PDF

report

Panasonic NVHS960ECS Operating instructions

This manual is also suitable for

Panasonic NVHS960ECS Operating instructions

Related papers

Other documents