Siemens Hicom 300 key 300 User manual

Siemens
Brand
Siemens
Model
Hicom 300 key 300
Type
User manual
Key300 Programming Instructions
Hicom 300
+
-
*
123
456
789
0#
Loud-
Spkr
Call
Back
Clear
Save
No.
Disc
Last
No
Park
Trsfer
Comm
Your Line
Ringer on/off
Shared Line 1
-
Shared Line 7
Remind
Call Fwd-Preset
Call Fwd-Variable
Call Fwd-Off
Call Fwd-Cancel
Message Wait
Message Retrieve
Menu / Esc
-
OK
-
Shared Line 5
-
Shared Line 6
Macro
Shared Line 2
-
Shared Line 3
-
Shared Line 4
-
Shared Line 8
Call Journal
Shared Line 9
Conference
2nd Level
-
8600 TH 17.08. 13:42
2
Programme Keys
This abbreviated programme manual is intended for use by Customer Support,
1st Line Maintenance and System Administrator personnel.
A fully comprehensive Service Handbook is also available.
The basic configuration of the instruments is programmed on the Service
Terminal.
The Key300 differs from the normal digital instruments on the Hicom 300
insofar as most of the programming of the keys is carried out on the instrument.
Key Codes
2nd Level 31 Intercom 17
3-Way Conference 15 Intercom Block 18
Call Forwarding - Preset 07 Knocking / Override 30
Call Forwarding - Off 08 Last Number 27
Call Forwarding - Variable 09 Line (Password reqd) 03
Call Forwarding - Cancel 10 Macro 04
Call Journal - In and Out 32 Message Waiting 23
Call Journal - In 33 Message Retrieve 26
Call Journal - Out 34 Mute 24
Call Back 12 Park 20
Call Transfer 13 Remind 22
Clear 29 Ring Transfer - Own 05
Communication 14 Ring Transfer - Remote 06
Dial (Destination) 01 Ringer on/off 11
Disconnect 19 Saved Number 28
DSS 02 Transfer (Consultation) 16
3
Notes
Most keys are progammed by simply entering the key code. Other keys
require more information.
Fixed keys - Menu / Esc, OK, Volume and Dial pad.
All other keys, with the exception of the Loudspeaker key, can be programmed
on the 1st and 2nd levels.
The KLMU module will accommodate 16 Set 551’s and a combination of 30
lines or DSS keys in one or more groups.
Selected lines can be multipled over 2 or more instruments.
To programme a key which is not vacant it must first be deleted.
Delete key
- press Menu / Esc key
- press 2nd Level key if required
- press # key
- press OK key
Programme key - Standard
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter key code
- press OK key
4
Programme key - Special
Dial (Destination)
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter code 01
- press OK key
- press OK key again or enter required number and OK key
DSS
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter code 02
- press OK key
- press new DSS key to scroll for required device number
- press OK key
- press 0 or 1 for CALL MEMORY ACTIVE? (Call Journal)
- press OK key
This key will not be operational until the associated key has been programmed
on the other device.
Macro
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter code 04
- press OK key
- press new Macro key to scroll for NOT USED number
- press OK key
5
Ring Transfer Own or Remote
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter code 05 (Own) or 06 (Remote)
- press new Ring Transfer key to scroll for new numbers if required
- press OK key
- press DSS key for required device
- press OK key
Line
- press Menu / Esc key
- press 2nd Level key if required
- press vacant key
- enter code 03
- press OK key
- enter PASSWORD
- press OK key
- enter required LINE NO.
- press OK key
- press 0 or 1 for CALL MEMORY ACTIVE (Call Journal)
- press OK key
- press 0 or 1 for RING TRANSFER POSSIBLE
- press OK key
- press 0 or 1 for GROUP ACTIVATED
- press OK key
- press OK key for RINGER TYPE HICOM
- press OK key for PREFIX NO.
6
Siemens Telecommunications (Pty) Ltd. Box 4583 Johannesburg
Wizard Menu
Programme Device Name
- press Menu / Esc key
- press
∗ ∗
∗ ∗
∗ key
- press 0
- enter name of device owner e.g. IAN
- press 4 three times and OK key
- press 2 once and OK key
- press 6 twice and OK key
- press OK key
Programme Line Name
- press Menu / Esc key
- press
∗ ∗
∗ ∗
∗ key
- press 1
- enter password
- press OK key
- press OK key for DPLM FOR PIN-MAN
- press OK key for INITIAL CONFIGURATION
- press 0 or 1 and OK key for DELETE USER PASSWORD
- enter required Line number
- enter Line name
- press 0 or 1 and OK key for DSS ACTIVATED
- press 0 or 1 and OK key for LOOP ON KLMU
- proceed to next Line number or press Menu / Esc key
The DSS ACTIVATED should only be programmed with a 1 when the line is
to be used as a DSS.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Siemens Hicom 300 key 300 User manual

Siemens
Brand
Siemens
Model
Hicom 300 key 300
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents