FMI GA7092 is a brass trim kit designed to enhance the appearance of CF26PR and CF26NR series fireplaces produced by Bayfront Fireplace Systems. It includes two brass trim pieces and four trim clips, which are used to secure the trim to the fireplace cabinet. The trim can be installed on both the top and bottom panels of the fireplace, and it is important to ensure that the clips are aligned with the pre-drilled holes in the fireplace cabinet. The kit comes with a template to assist with marking the hole locations, and it is recommended to use needle-nose pliers to snap the clips into place.
FMI GA7092 is a brass trim kit designed to enhance the appearance of CF26PR and CF26NR series fireplaces produced by Bayfront Fireplace Systems. It includes two brass trim pieces and four trim clips, which are used to secure the trim to the fireplace cabinet. The trim can be installed on both the top and bottom panels of the fireplace, and it is important to ensure that the clips are aligned with the pre-drilled holes in the fireplace cabinet. The kit comes with a template to assist with marking the hole locations, and it is recommended to use needle-nose pliers to snap the clips into place.
FMI GA7092 is a brass trim kit designed to enhance the appearance of CF26PR and CF26NR series fireplaces produced by Bayfront Fireplace Systems. It includes two brass trim pieces and four trim clips, which are used to secure the trim to the fireplace cabinet. The trim can be installed on both the top and bottom panels of the fireplace, and it is important to ensure that the clips are aligned with the pre-drilled holes in the fireplace cabinet. The kit comes with a template to assist with marking the hole locations, and it is recommended to use needle-nose pliers to snap the clips into place.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI