Magnavox MHT935BT is a versatile audio device that offers a range of features for enjoying music and radio. With Bluetooth connectivity, you can wirelessly stream music from your smartphone, tablet, or other compatible devices. The unit also has an FM radio tuner with auto-scan and preset functions, so you can easily find and save your favorite stations. Additionally, there are two auxiliary input jacks, allowing you to connect external audio sources such as MP3 players or CD players.
Magnavox MHT935BT is a versatile audio device that offers a range of features for enjoying music and radio. With Bluetooth connectivity, you can wirelessly stream music from your smartphone, tablet, or other compatible devices. The unit also has an FM radio tuner with auto-scan and preset functions, so you can easily find and save your favorite stations. Additionally, there are two auxiliary input jacks, allowing you to connect external audio sources such as MP3 players or CD players.
2
Before using the unit, be sure to read all operating
instructions carefully. Please note that these are general
precautions and may not pertain to your unit For example,
this unit may not have the capability to be connected to an
outdoor antenna.
1. Read these instructions
All the safety and operating instructions should be read
before the product is operated.
2. Keep these instructions
The sately and operating instructions should be retained
for future reference.
CALIFORNIA PROP 65 WARNING:
This product contains c
hemicals
known to the State of
California to cause birth defects or other reproductive harm.
For more information on these
regulations and a list
of
chemicals, log on the
following website:
http://www.oehha.ca.gov/prop65.html
IMPORTANT SAFETY INSTRUCTIONS
3
POWER
ON OFF
AUX IN 1
AUX IN 2
R L
DC IN
DC 12V,2A
ANT
TO DC IN JACK
To Wall Outlet
Connect the small plug from the supplied AC/DC Adaptor
to DC IN Jack on the rear of unit. Connect the AC/DC
Adaptor to a wall outlet having AC 100-240V~,
50/60Hz.
NOTE: This AC/DC Adaptor is intended to be
correctly orientated in a vertical or floor mount
position.
4
POWER SOURCE
15
12
10
8 9
7
11
14
16
13
1. Remote Sensor（On the front of unit）
2. POWER ON/OFF Switch
3. DC IN Jack (DC 12V, 2A, )
4. AUX IN 2 Jacks
5. AUX IN 1 Jack
6. FM Wire Antenna
7. STANDBY / FM Indicator
8. (Bluetooth) Indicator
9. AUX 1 Indicator
10. AUX 2 Indicator
11. VOL - (Volume Down) Button
12. VOL + (Volume Up) Button
13. (Standby) Button
14. TUNE - / (Skip Backward) Button
15. TUNE + / (Skip Forward) Button
16. SOURCE -- LED ON/OFF Button
2
6
1
3 4 5
POW ER
ON OF F
AUX I N 1
AUX I N 2
R L
DC IN
DC 12 V, 2A
ANT
POWER
ON OFF
AUX IN 1
AUX IN 2
R L
DC IN
DC 12V,2A
ANT
AUX 1 AUX 2
STANDBY/F M
SOURCE
LED
ON/OFF
VOL+VOL-
TUNE-
TUNE+
AUX 1 AUX 2
STAN DBY/ FM
SOURCE
LED
ON/OFF
VOL +VOL -
TUN E-
TUN E+
5
LOCATION OF CONTROLS
LED
ON/OFF
FM
AUX 1 AUX 2
TUNE-
RESET
TUNE+
VOL - VOL +
2
1
4
7
11
6
8
12
5
3
9
10
1. (Standby) Button
2. � (Mute) Button
3. LED ON/OFF Button
4. FM Button
5. AUX 1 Button
6. AUX 2 Button
7. TUNE - / (Skip Backward) Button
8. TUNE + / (Skip Forward) Button
9. RESET Button
10.
6
11. VOL - (Volume Down) Button
12. VOL + (Volume Up) Button
LOCATION OF CONTROLS (Remote Control)
(Bluetooth) Indicator
During first time use, slide the insulation film out from the battery tray and
discard it as illustrated to the right:
When the battery is consumed, replace the battery as shown below:
1. Push the tap on the battery tray and slide it out as the illustrated below:
2. Install a new CR 2025 button cell to the battery tray as the polarity makings
on the rear of remote cabinet.
3. Close the battery tray.
BATTERY PRECAUTIONS:
Follow these precautions when using the battery in this device:
Remarks:
● When there is an obstacle between the unit and
the transmitter, the transmitter may not operate.
● When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light shines
on the REMOTE SENSOR of the unit, the remote
operation may be unstable.
Fig.1
Fig.2
Fig.3
7
Remote Sensor
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burn in just 2 hours and can lead to
death.
Keep new and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention
8.
Approx.12 feet
°
°
BATTERY INSTALLATION (Remote Control)
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer’s instructions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of
time, remove
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
8
GENERAL OPERATION:
1. Connect the supplied AC/DC Adaptor to the unit and wall outlet as previously instructed.
2. Slide the Power ON/OFF Switch on the rear of unit to turn the unit to standby mode.
3. Press the (Standby) Button on the unit approximately 2 seconds then release the button or
press the
(Standby) Button on the Remote Control to turn the unit ON from standby mode.
The
indicator
will illuminate.
4. Press the SOURCE -- LED ON/OFF Button on the repeatedly to switch to desired playback mode. (Or
press the
function selection buttons on the Remote Control to switch to desire mode directly).
The correspond
indicator will illuminate (and blink ) with your selection (see list below):
Playback Mode:
Indicators:
BT (Bluetooth) Indicator will illuminate (and blink)
FM Radio STANDBY/FM Indicator will illuminate
and blink
AUX 1 AUX 1 Indicator will illuminate
AUX 2 AUX 2 Indicator will illuminate
5. During playback,
Press the VOL (Volume) +/- Buttons on the unit or Remote Contr l to adjust volume level as desired.
Press the (MUTE) Button on the Remote Control to turn off the sound temporar , press again
to turn
it back .
Press and hold the SOURCE – LED ON/OFF Button on the unit or press the LED ON/OFF Button
on the
Remote control to turn ON/OFF the Decorative LED Lights.
6. When finished, press and hold the (Standby) Button on the unit approximately 0.5 second or
press the
(Standby) Button on the Remote Control to turn the unit to standby mode.
The STANDBY/FM will illuminate and
stop blinking.
7. urn off the unit by sliding the POWER ON/OFF
Switch on
the rear of
unit to OFF position. All the indicators will turn off.
( o saving energy, unplug the AC/DC Adaptor from wall outlet).
�
on
ing
correspond
ing
o
i
ly
o
n
on
If the unit will not be used over a long period of time,
t
T
OPERATION
9
BT (Bluetooth):
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Power on the unit as previously instructed.
2. Press the SOURCE – LED ON/OFF Button on the unit repeatedly until the (Bluetooth) Indicator
Or, press the (Bluetooth) Button on the Remote Control to enter BT mode directly, the
(Bluetooth)
Indicator illuminate and blink.
3. Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen
instructions from the external BT Device. After paired, the (Bluetooth) Indicator will stop
blinking.
4. If pairing is complete you may now play music with your external BT Device.
5. During playback:
Press the Button on the unit to pause, press again to resume normal playback.
Press the (MUTE) Button on the Remote Control to turn off the sound temporar y, press
again to turn
it back.
Press the TUNE -/ or TUNE +/ Buttons on the unit or Remote Control repeatedly to
skip tracks.
Notes:
When the external BT Device searche the unit, our model number “MHT935BT” will appear
on
the display of
external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Power on the unit and enter to BT mode as previously instructed. (Bluetooth) Indicator will
illuminate and
blink.
3. Wait a few seconds until the unit is automatically paired to the external BT Device. (“ Indicator will
stop
blinking).
4. After pairing is complete you may now play music with your external BT Device.
�
(Standby)
will
il
for
s
is illuminated and blinking.
10
FM Radio:
1. Power on the unit as previously instructed.
2. Press the SOURCE – LED ON/OFF Button on the unit repeatedly until the STANDBY/FM Indicator is
Or, press the FM Button on the Remote Control to enter FM Radio mode directly, the STANDBY/FM
Indicator
will illuminate and blink.
3. Press and hold the Buttons on the unit or Remote Control to auto
search
and plays
the previous/next available radio stations.
4. Repeat the same procedure until the desired station s .
5. If you want earch the stations from beginning, press the RESET Button on the Remote
Antennas:
This unit has a FM wire antenna, which provides adequate reception in most areas. If reception is weak,
unwound and
extended to its full length or reassemble the other direction/location to improve reception.
TUNE -/ or TUNE +/
i
ound
f
to res
Control then search through the radio stations again as instructed on Number 3.
illuminated and blink.
1. Insert one of the plugs from supplied Audio connection cable (with 3.5mm stereo mini plugs) to
the Phones Jack; Line Out Jack or AUX Out Jack on external audio device such as iPhones;
iPad; iPod; MP3 Player; Discman … etc as shown below.
2. Power on the unit as previously instructed.
4. Play the music on the connected external Audio device as usual. (Make sure the volume level
of the external device is in high level. Otherwise, sound from this unit is weak).
1. Insert one end of RCA connec tion cable to the Audio Out Jacks (RCA Type) on external
Video/Audio device such like TV; DVD Player; VCR … etc as shown below.
2. Power on the unit as previously instructed.
4. Play the music on the connected external Audio device as usual. (Make sure the volume level
of the external device is in high level. Otherwise, sound from this unit is weak).
POWER
ON OFF
AU X IN 1
AU X IN 2
R L
DC I N
DC 12V,2A
AN T
Rear Panel
POWER
ON OFF
AU X IN 1
AU X IN 2
R L
DC I N
DC 12V,2A
AN T
( Connection Cable Not Included )
Rear Panel
DVD
( Audio Connection
Cable Included )
11
AUX 1
AUX 2
3. Press the SOURCE – LED ON/OFF Button on the unit repeatedly until the AUX 1 Indicator is
illuminated and blinking. Or, press the AUX 1 Button on the Remote Control to enter AUX 1 mode
directly, the AUX 1 Indicator will illuminate.
3. Press the SOURCE – LED ON/OFF Button on the unit repeatedly until the AUX 2 Indicator is
illuminated and blinking. Or, press the AUX 2 Button on the Remote Control to enter AUX 2 mode
directly, the AUX 2 Indicator will illuminate.
Check the follows before requesting service:
SYMPTOM POSSIBLE CAUSE
No power AC/DC Adaptor had not
wall outlet
POWER Switch is in OFF
position
on
the rear of unit to ON
position
The unit in standby mode Press and hold the
(Standby) Button on the unit
2 seconds then
release the button or Press
the
(Standby) Button on
the Remote Control to turn
on the unit from standby
mode
No Sound Volume in minimum position Rise volume level by press
the
The connected device is
not
in playback mode
Plays the music/movie in
the
connected
device as usual
Sound output of the
weak
Rise the volume level of the
device
Input source incorrect
Sound distortion Volume level too high
press the
Volume level of the
connecte
device too high the connected device
BT not functioning
The external BT device too
far from the unit
Place the external BT
device close to the unit
Remote not
functioning
The button cell in the remote
control consumed
Replace it by new button cell
Set the input source as t
Reduce the volume level by
POSSIBLE SOULTION
VOL (Volume) +
Button
VOL (Volume) - B
utton
Reduce the volume and/or bass
level of
12
connect to
and unit
Connect the AC/DC Adaptor to
the wall outlet and unit
Slide the POWER ON/OFF Switch
approximately
/paird
/paird
connected
/paird
device
connected
/paird
source
paird
/paird
The external BT device had
not pair to the unit
Pair the external BT device to the
unit as page 9
TROUBLESHOOTING GUIDE
he desired
d/
Power Source: ………………………………DC 12V, 2A, Centre Positive
Power Source of Remote Control: ….DC 3V, 1 x CR 2025 Button Cell (Included)
Power Consumption: ………………………………………………………….. Max. 24 W
Radio FM Band Coverage: …………………………………………….…. 87.5-108MHz
BT Effective Range: ...................................…………......... Up to 32 Feet in open area
Remote Control Effective Range: ……………………………Up to 12 Feet in open area
Audio Power: ……………………………………………………………..20W RMS (4 x 5W)
Impedance of Speakers: ……………………………………………….. 3 Ohm;10W x 4
1 x Owner’s Manual
1 x Remote Control (Use 1 x CR 2025 button cell, already installed)
1 x Audio Connection Cable with 3.5mm Stereo Mini Plugs
1 x AC/DC Adaptor (Input: AC 100-240V~, 50/60Hz, 0.6A;
Output: DC 12V, 2000mA , Centre Positive）
13
GENERAL SPECIFICATIONS
ACCESSORIES
LIMITED WARRANTY
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Magnavox MHT935BT is a versatile audio device that offers a range of features for enjoying music and radio. With Bluetooth connectivity, you can wirelessly stream music from your smartphone, tablet, or other compatible devices. The unit also has an FM radio tuner with auto-scan and preset functions, so you can easily find and save your favorite stations. Additionally, there are two auxiliary input jacks, allowing you to connect external audio sources such as MP3 players or CD players.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Magnavox MHT983 Owner's manual
-
-
-
-
-
Magnavox MHT833 Owner's manual
-
-
-
-
