2. Kobe
  3. IN2636SQB-700-1 (650-5A)

Kobe IN2636SQB-700-1 (650-5A), IN2630SQB-700-2 (650-5A) Service guide

  • Hello! I am an AI chatbot trained to assist you with the Kobe IN2636SQB-700-1 (650-5A) Service guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KOBE Range Hoods
“So Quiet … You Won’t Believe It’s On!”
Page 1 of 4
Version 20180901
IN26 SQB-700-2 Parts Location and Replacement
This basic guide is to show the parts location of the IN26 SQB-700-2 and how to remove or install certain parts.
To see more detailed guidelines, please visit: KOBE Service and Repair
For 30” model: IN2630SQB-700-2
For 36” model: IN2636SQB-700-1
Overall Snapshot of IN26 SQB-700-2
1. Blower System (Manual Part #11 (30” model), Part #11 (36” model) – See “Parts List” page on manual)
2. Control Unit (Manual Part #16 (30” model), Part #16 (36” model) – See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #18 (30” model), Part #18 (36” model) – See “Parts List” page on manual)
1
3
2
3
KOBE Range Hoods
“So Quiet … You Won’t Believe It’s On!”
Page 2 of 4
Version 20180901
Accessing the Capacitor and Processor Board
Figure 1 Figure 2
4. Motor Transformer (Manual Part #6 (30” model), Part #6 (36” model) – See “Parts List” page on manual)
5. Capacitor (Manual Part #9 (30” model), Part #9 (36” model) – See “Parts List” page on manual)
6. Processor Board (Manual Part #7 (30” model), Part #7 (36” model) – See “Parts List” page on manual)
4
4
6
5
KOBE Range Hoods
“So Quiet … You Won’t Believe It’s On!”
Page 3 of 4
Version 20180901
Accessing the Control Unit
Figure 1 Figure 2
Figure 3 Figure 4
7. Light Panel Support (Manual Part #17 (30” model), Part #17 (36” model) – See “Parts List” page on manual)
8. Control Unit (Manual Part #16 (30” model), Part #16 (36” model) – See “Parts List” page on manual)
Accessing the LED Light
Warning: For the process above, loosen
the screw first with a hand tool screw
driver.
For a more detailed guideline, visit
How to Replace LED Lights
7
8
8
7
8
8
KOBE Range Hoods
“So Quiet … You Won’t Believe It’s On!”
Page 4 of 4
Version 20180901
Removing the Blower System
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.
Figure 1 Figure 2
Figure 3
1. Blower System (Manual Part #11 (30” model), Part #11 (36” model) – See “Parts List” page on manual)
/