Sub-Zero 5310858 User guide

Design Guide

REVISED 10/2020

2 | Sub-Zero Customer Care 800.222.7820

Design Guide

Features and speciﬁcations are subject to change at any

time without notice. Visit subzero.com/specs for the most

up-to-date information.

Throughout this guide, dimensions may vary by ± ⁄"

(3).

Dimensions in parentheses are millimeters unless otherwise

speciﬁed.

subzero.com | 3

Contents

4 Classic Series Refrigeration

40 PRO Series Refrigeration

48 Designer Series Refrigeration

58 Wine Storage

90 Undercounter Refrigeration

98 Sub-Zero Warranty

Contents

4 | Sub-Zero Customer Care 800.222.7820

Classic Series Refrigeration

For Classic series refrigeration, Sub-Zero design-

ers and engineers took a fresh look at every-

thing, inside and out. Exterior reﬁnements

include redesigned grilles and lower-proﬁle

hinges. Inside, new technology in food preserva-

tion makes Classic series refrigeration nothing

short of revolutionary.

Classic Series Refrigeration

CLASSIC SERIES MODELS

BI-36R

BI-36RG

BI-36F

BI-30U

BI-30UG

BI-36U(ID)

BI-36UG

BI-36UFD(ID)

BI-42UFD(ID)

BI-36S

BI-42S(ID)

BI-42SD

BI-48S(ID)

BI-48SD

subzero.com | 5

Speciﬁcations

INTERIOR CAPACITY—CU FT (L)

ALL REFRIGERATOR / ALL FREEZER REFR FRZR

BI-36R 23.5 (665)

BI-36RG 23.4 (663)

BI-36F 22.7 (643)

OVER-AND-UNDER REFR FRZR

BI-30U 13.2 (374) 4.2 (119)

BI-30UG 13.1 (371) 4.2 (119)

BI-36U(ID) 16.4 (464) 5.3 (150)

BI-36UG 16.3 (462) 5.3 (150)

BI-36UFD(ID) 15.7 (445) 5.3 (150)

BI-42UFD(ID) 17.9 (507) 6.3 (178)

SIDE-BY-SIDE REFR FRZR

BI-36S 12.4 (351) 8.2 (232)

BI-42S 16.3 (462) 8.0 (227)

BI-42SID 15.8 (447) 7.9 (224)

BI-42SD 16.0 (453) 7.9 (224)

BI-48S 19.1 (541) 9.8 (278)

BI-48SID 18.6 (527) 9.6 (272)

BI-48SD 18.8 (532) 9.6 (272)

Classic Series Refrigeration

6 | Sub-Zero Customer Care 800.222.7820

Classic Series Design Options

FRAMED

Choose framed custom door panels that contrast with

the stainless steel full-length handles and louvered grille

(shown). The framed application is an overlay model with

framed design features. Panel, grille, and handle options

are available.

Panels: Custom panels, stainless steel, or white enamel.

Grille: Classic louvered grille insert or solid custom panel

for 84" (standard), 83", or 88" overall unit height. Dual wide

grille for dual installations.

Handles: Full-length standard or extended handles.

OVERLAY

Custom overlay door panels can be combined with unique

handle hardware for design ﬂexibility. Shown with the pro

handle option to complement Wolf ranges. Customize

with panel, grille, and handle options.

Panels: Custom panels or stainless steel.

Grille: Solid custom panel or pro louvered grille for 84"

(standard), 83", or 88" overall unit height. Dual wide grille

for dual installations.

Handles: Custom, tubular, or pro handles.

Overlay

Framed

Classic Series Refrigeration

subzero.com | 7

Classic Series Design Options

FLUSH INSET

The ﬂush inset design option allows for ﬂush door and

grille panels and custom handle hardware. Shown with the

tubular handle option to match Wolf built-in ovens. The

ﬂush inset application is an overlay model with ﬂush inset

panels. Customize with panel, grille, and handle options.

Panels: Custom panels or stainless steel.

Grille: Solid custom panel or pro louvered grille for 84"

(standard), 83", or 88" overall unit height. Dual wide grille

for dual installations.

Handles: Custom, tubular, or pro handles.

STAINLESS STEEL

Stainless steel models require no customization. To com-

plement the look of Wolf ranges, choose the pro handle

option (shown). Grille and handle options are available.

Grille: Pro louvered grille for 84" (standard), 83", or 88"

overall unit height. Dual wide grille for dual installations.

Handles: Tubular or pro handles.

Flush inset

Stainless steel

Classic Series Refrigeration

8 | Sub-Zero Customer Care 800.222.7820

Overall Dimensions

ALL REFRIGERATOR / ALL FREEZER

Model BI-36R, BI-36RG, BI-36F

36"

(914)

84"

(2134)

4" (102)

73

3

/4"

(1873)

23

7

/8"

(606)

37

1

/4"

(946)

14

1

/8"

(359)

23

7

/

8

"

(606)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

26

3

/

16

"

(665)

Overall dimensions are based on stainless steel models.

For ﬂush inset applications, add ⁄"

(13) to door clearance

dimensions.

Classic Series Refrigeration

subzero.com | 9

Overall Dimensions

OVER-AND-UNDER

Model BI-30U, BI-30UG

30" (762)

84"

(2134)

4" (102)

50

3

/

4

"

(1289)

23"

(584)

23

7

/8"

(606)

23

5

/8"

(600)

31

1

/4"

(796)

12

1

/8"

(308)

26

3

/16" (665)

23

7

/8" (606)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/

2

"

(13)

Model BI-36U(ID), BI-36UG

36" (914)

84"

(2134)

4" (102)

50

3

/4"

(1289)

23"

(584)

23

7

/8"

(606)

23

5

/8"

(600)

37

1

/4"

(946)

23

7

/8" (606)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/

2

"

(13)

26

3

/16" (665)

14

1

/8"

(359)

Classic Series Refrigeration

10 | Sub-Zero Customer Care 800.222.7820

Overall Dimensions

OVER-AND-UNDER

Model BI-36UFD(ID)

36" (914)

84"

(2134)

4" (102)

50

3

/4"

(1289)

23"

(584)

23

7

/8"

(606)

23

5

/8"

(600)

19

1

/2"

(495)

8"

(203)

23

7

/8" (606)

HEIGHT DIMENSIONS ±

1

/

2

"

(13)

2

3

/8" (60)

26

3

/16" (665)

Model BI-42UFD(ID)

42" (1067)

84"

(2134)

4" (102)

50

3

/4"

(1289)

23"

(584)

23

7

/8"

(606)

22

1

/4"

(565)

9"

(229)

23

7

/8" (606)

HEIGHT DIMENSIONS ±

1

/2" (13)

2

3

/8" (60)

26

3

/16" (665)

23

5

/8"

(600)

Classic Series Refrigeration

subzero.com | 11

Model BI-36S

36" (914)

84"

(2134)

4" (102)

73

3

/4"

(1873)

23

7

/8"

(606)

22

1

/4"

(565)

7

1

/4"

(184)

8

3

/4"

(222)

23

7

/8" (606)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

26

3

/16" (665)

Overall Dimensions

SIDE-BY-SIDE

Model BI-42S(ID), BI-42SD

42" (1067)

84"

(2134)

4" (102)

73

3

/

4

"

(1873)

23

7

/8" (606)

23

7

/8"

(606)

26

1

/4"

(668)

10

3

/8"

(264)

7

1

/2"

(191)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

26

3

/16" (665)

Classic Series Refrigeration

12 | Sub-Zero Customer Care 800.222.7820

Overall Dimensions

SIDE-BY-SIDE

Model BI-48S(ID), BI-48SD

48" (1219)

84"

(2134)

4"

(102)

73

3

/4"

(1873)

23

7

/8" (606)

23

7

/8"

(606)

30"

(762)

11

5

/8"

(295)

8

3

/8"

(213)

2

3

/8" (60)

HEIGHT DIMENSIONS ±

1

/2" (13)

26

3

/16" (665)

Classic Series Refrigeration

subzero.com | 13

Classic Series Refrigeration

14 | Sub-Zero Customer Care 800.222.7820

Opening Dimensions

STANDARD INSTALLATION

3

/

4

"

(19)

TYPICAL

FRAMED

CABINETRY

W

FILLER

3

1

/

2

"

(89)

FINISHED

RETURN

FRAMELESS

CABINETRY

W

3

/4" (19)

TYPICAL

3

1

/2" (89)

FINISHED

RETURN

NOTE:

3

1

/2" (89) finished returns will be visible and should be finished to match cabinetry.

Shaded line represents profile of unit

.

83

3

/4"

(2127)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

FRONT VIEW

SIDE

VIEW

TOP VIEW

W

OPENING WIDTH

OPENING WIDTH W

30" Model 29

1

/2" (749)

36" Model 35

1

/2" (902)

42" Model 41

1

/2" (1054)

48" Model 47

1

/2" (1206)

If an 83" (2108) grille height is speciﬁed, the opening height

must be decreased by ⁄"

(22). If an 88" (2235) grille height is

speciﬁed, the opening height must be increased by 4"

(102).

If two units are installed side by side, refer to page 16 for

dual standard installations.

Classic Series Refrigeration

subzero.com | 15

Opening Dimensions

FLUSH INSET INSTALLATION

FLUSH INSET WIDTH W

30" Model 32" (813)

36" Model 38" (965)

42" Model 44" (1118)

48" Model 50" (1270)

Flush inset is available for overlay models only.

Dimensions assume a ⁄"

(19) panel thickness.

If an 83"

(2108) grille height is speciﬁed, the ﬂush inset

height must be decreased by ⁄"

(22). If an 88" (2235) grille

height is speciﬁed, the ﬂush inset height must be increased

by 4"

(102).

If two units are installed side by side, refer to page 17 for

dual ﬂush inset installations.

84"

(2134)

FLUSH

INSET

HEIGHT

1

/4"

(6)

26

3

/16"

(665)

FLUSH

INSET

DEPTH

2

3

/16"

(56)

NOTE:

3

1

/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry.

Shaded line represents profile of unit with

3

/4" (19) panel.

FRONT VIEW

SIDE

VIEW

TOP VIEW

1

/4"

(32)

W

FLUSH INSET WIDTH

FINISHED

CLEATS

5

11

/16"

(145)

FINISHED

RETURN

FILLER

FRAMED

CABINETRY

W

CLEAT

3

/4" (19)

TYPICAL

3

1

/2"

(89)

5

11

/

16

"

(145)

FINISHED

RETURN

FRAMELESS

CABINETRY

W

3

1

/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

Classic Series Refrigeration

16 | Sub-Zero Customer Care 800.222.7820

Opening Dimensions

DUAL STANDARD INSTALLATION

NOTE:

3

1

/2" (89) finished returns will be visible and should be finished to match cabinetry.

Shaded line represents profile of unit

.

83

3

/4"

(2127)

OPENING

HEIGHT

24" (610)

OPENING

DEPTH

FRONT VIEW

SIDE

VIEW

TOP VIEW

W

OPENING WIDTH

3

/

4

"

(19)

TYPICAL

FRAMED

CABINETRY

W

FILLER

3

1

/

2

"

(89)

FINISHED

RETURN

FRAMELESS

CABINETRY

W

3

/4" (19)

TYPICAL

3

1

/2" (89)

FINISHED

RETURN

A dual installation kit is required for this installation.

DUAL OPENING WIDTH W

Two 30" Models 59

3

/4" (1518)

30" and 36" Models 65

3

/4" (1670)

Two 36" Models 71

3

/4" (1822)

Classic Series Refrigeration

subzero.com | 17

Opening Dimensions

DUAL FLUSH INSET INSTALLATION

84"

(2134)

FLUSH

INSET

HEIGHT

1

/4"

(6)

26

3

/16"

(665)

FLUSH

INSET

DEPTH

2

3

/16"

(56)

FRONT VIEW

SIDE

VIEW

TOP VIEW

FINISHED

CLEATS

1

/4"

(32)

W

FLUSH INSET WIDTH

NOTE:

3

1

/2" (89) finished returns and shaded areas will be visible and should be finished to match cabinetry.

Shaded line represents profile of unit with

3

/4" (19) panel.

5

11

/16"

(145)

FINISHED

RETURN

FILLER

FRAMED

CABINETRY

W

CLEAT

3

/4" (19)

TYPICAL

3

1

/2"

(89)

5

11

/

16

"

(145)

FINISHED

RETURN

FRAMELESS

CABINETRY

W

3

1

/2"

(89)

CLEAT

3

/4" (19)

TYPICAL

Flush inset is available for overlay models only.

Dimensions assume a ⁄"

(19) panel thickness. A dual instal-

lation kit is required for this installation.

DUAL FLUSH INSET WIDTH W

Two 30" Models 62

1

/4" (1581)

30" and 36" Models 68

1

/4" (1734)

Two 36" Models 74

1

/4" (1886)

Classic Series Refrigeration

18 | Sub-Zero Customer Care 800.222.7820

Plumbing Requirements

Locate the water supply line within the shaded area shown

in the illustration below. Connect the water supply line to

the house supply with an easily accessible shut-o valve.

Do not use self-piercing valves. The water supply line must

not interfere with the installation of the anti-tip brackets.

A reverse osmosis system can be used provided there is

constant water pressure of 35–120 psi

(2.4–8.3 bar) supplied

to the unit at all times. A copper line is not recommended

for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply ⁄" OD copper, braided stainless

steel, or PEX tubing

Pressure 35–120 psi (2.4–8.3 bar)

Excess Line for Connection 36" (914)

Electrical Requirements

The electrical supply should be located within the shaded

area shown in the illustration below. A separate circuit ser-

vicing only this appliance is required. A ground fault circuit

interrupter (GFCI) is not recommended and may cause

interruption of operation.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Electrical Supply 115 VAC, 60 Hz

Service 15 amp dedicated circuit

Receptacle 3-prong grounding-type

75

1

/2" (1918)

FROM FLOOR

7"

(178)

E

6"

(152)

RIGHT SIDE

OF OPENING

Electrical supply location

3" (76)

18" (457)

6" (152)

RIGHT SIDE

OF OPENING

AREA EXTENDS

1

/2" (13)

FORWARD ON FLOOR

Water supply location

Classic Series Refrigeration

subzero.com | 19

FRAMED PANELS

The framed application is an overlay model with framed

design features. It is not a separate model.

If the custom panel is thinner than ⁄"

(6), a ﬁller material

must be added to achieve a proper ﬁt. If the panel is thicker

than ⁄"

(6), rout an edge around the panel or mount the

custom panel on a sheet of ⁄"

(6) thick material and insert

into the channel. Refer to the illustrations below.

Routing, recessing, or optional extended handles may be

required for ﬁnger clearance. Refer to the full-scale tem-

plate on page 34.

When installing two units side by side, refer to page 16 for

dual standard installations.

Custom Panels

For framed, overlay, and ﬂush inset applications, custom

door panels must be provided. Handle hardware must also

be provided for overlay and ﬂush inset applications. Refer

to Panel Requirements below and the charts on pages

22–27 for custom panel dimensions for your speciﬁc

design application.

IMPORTANT NOTE: Do not cover a glass door with a solid

panel.

Finish all sides of the custom panels. They may be visible

when the door is open or through the window of glass

door models.

PANEL REQUIREMENTS

WEIGHT PER PANEL MAX

BI-36R, BI-36RG, BI-36F 75 lb (34 kg)

All Other Models 50 lb (23 kg)

Grille Panel 13 lb (6 kg)

PANEL THICKNESS MIN

Framed ⁄" (6)

Overlay and Flush Inset ⁄" (16)

DOOR

1

/4" (6) TRIM REVEAL

1

/4" (6) PANEL

1

/4" (6) min

ROUT TO

1

/4" (6)

DOOR

Panel ⁄" thick or less

Panel thicker than ⁄"

Classic Series Refrigeration

20 | Sub-Zero Customer Care 800.222.7820

PANEL MOUNTING KIT

The Sub-Zero custom panel mounting kit eliminates the

need for the backer and spacer panels and is avail able

through an authorized Sub-Zero dealer. For local dealer

information, visit the ﬁnd a showroom section of our

website, subzero.com. The kit consists of mounting cleats,

screws, and gages used to properly position the cleats. The

kit is available for all Classic series models except glass door

models. Dual installations require two mounting kits.

OVERLAY PANELS

Overlay panels are typically created by combining a ⁄"

(19)

custom panel, a .10" (3) spacer panel, and a ⁄"

(6) backer

panel. Refer to the illustrations below.

When installing two units side by side, refer to page 16 for

dual standard installations.

1

/8" (3) (OVERLAY)

CUSTOM PANEL

SPACER PANEL

BACKER PANEL

TRIM

5

/16" (8) min

1

/4" (6)

.10" (3)

CUSTOM

PANEL

SPACER

PANEL

BACKER

PANEL

3

/4"

(19)

typical

Panel assembly (cross section)

Panel assembly (rear view)

Custom Panels

PARTIAL FRAMED OPTION

The partial framed kit includes a stainless steel panel for

above and below the external dispenser. Refer to the chart

below for panel width. The kit is avail able through an

authorized Sub-Zero dealer. For local dealer information,

visit the ﬁnd a showroom section of our website, subzero.

com.

PARTIAL FRAMED PANEL W

BI-42SD 15⁄" (383)

BI-48SD 18⁄" (476)

Classic Series Refrigeration

Page is loading ...

Sub-Zero 5310858 User guide

Related papers

Other documents