Broan B4VM-X Installation guide

Type
Installation guide

This manual is also suitable for

Circuit Breaker
Cover
Circuit
Breakers
Recess
Air Handler Access Door
Installation Instructions
FOR B4 & B5 SERIES AIR HANDLERS
AIR HANDLER CIRCUIT BREAKER COVER
The air handler circuit breaker cover is designed to protect the breakers of an installed heater kit from debris and
condensation.The cover attaches to the breaker recess of the air handler upper access door using a double-sided
adhesive gasket. The heater kit circuit breaker toggles are still accessible and can be switched with the cover in place.
709262A (Replaces 7092620)
There are 2 different circuit breaker cover sizes:
2-breaker cover for air handlers with A or B size cabinets
• 3-breaker cover for air handlers with C size cabinet
After the heater kit is properly installed, remove the
appropriate knockouts in the upper air handler access door
and follow these instructions to install the breaker cover:
1. Clean any oil, dirt, or insulation fibers from the recess
area of the air handler access door. This step is
important for ensuring the gasket adheres properly
to the sheet metal door.
2. Remove release paper from one side of the gasket
and attach to back side of the breaker cover.
NOTE: For proper alignment, It is recommended to
leave the center section of the gasket in place when
attaching the gasket to the breaker cover. Remove
the center section after the gasket is applied to the
breaker cover.
3. Remove the release paper from the other side of the
gasket and attach to the circuit breaker recess area.
4. Press firmly along all four sides of the cover to ensure
gasket and cover are securely attached to the access
door.
Specifications & illustrations subject to change without notice or incurring obligations (05/18).
O’Fallon, MO, © Nortek Global HVAC LLC 2018. All Rights Reserved.
  • Page 1 1

Broan B4VM-X Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI