WARRIOR 67864 Owner's manual

Type
Owner's manual

This manual is also suitable for

WARRIOR Item 67864-UPC 193175316127 is a wire brush that can be used for a variety of tasks, including removing rust, paint, and other debris from metal surfaces. The brush is made of high-quality steel wire that is durable and long-lasting. It has a 1/4-inch arbor that fits most power tools. The brush can be used at speeds up to 4,500 RPM.

Some of the possible use cases for the WARRIOR Item 67864-UPC 193175316127 wire brush include:

  • Removing rust from metal surfaces
  • Removing paint from metal surfaces
  • Removing other debris from metal surfaces
  • Cleaning tools and equipment
  • Polishing metal surfaces

WARRIOR Item 67864-UPC 193175316127 is a wire brush that can be used for a variety of tasks, including removing rust, paint, and other debris from metal surfaces. The brush is made of high-quality steel wire that is durable and long-lasting. It has a 1/4-inch arbor that fits most power tools. The brush can be used at speeds up to 4,500 RPM.

Some of the possible use cases for the WARRIOR Item 67864-UPC 193175316127 wire brush include:

  • Removing rust from metal surfaces
  • Removing paint from metal surfaces
  • Removing other debris from metal surfaces
  • Cleaning tools and equipment
  • Polishing metal surfaces
WIRE BRUSH SAFETY
During operation, brush filaments will break off due to
wear and fly out from the brush with great force along with
materials removed from the workpiece. This can cause
serious injury for the operator and others in the work area
(up to 50 feet or farther from the operation). To reduce
the risk of serious injury from flying wires and debris, the
operator and others in the area must wear safety goggles
with side shields or face shield and protective clothing.
WARNING
To prevent serious injury:
1. Do not use with tool rated higher than 4,500 RPM.
2. Wear ANSI-approved safety goggles or face shield,
and heavy-duty work gloves during installation and use.
Loose wires forcefully thrown during use.
3. Inspect before installing and every use; do not use if wires
are loose, damaged, or worn. If wires come loose or are
missing, discontinue use immediately and discard wheel.
4. Use as intended only. Use on tool with spindle that
matches arbor and guards appropriate for wire wheels.
Avoid applying heavy pressure to prevent wire breakage.
5. Disconnect tool from power before installing.
6. Keep away from children. 20i
SAVE THESE WARNINGS
WIRE BRUSH SAFETY
During operation, brush filaments will break off due to
wear and fly out from the brush with great force along with
materials removed from the workpiece. This can cause
serious injury for the operator and others in the work area
(up to 50 feet or farther from the operation). To reduce
the risk of serious injury from flying wires and debris, the
operator and others in the area must wear safety goggles
with side shields or face shield and protective clothing.
WARNING
To prevent serious injury:
1. Do not use with tool rated higher than 4,500 RPM.
2. Wear ANSI-approved safety goggles or face shield,
and heavy-duty work gloves during installation and use.
Loose wires forcefully thrown during use.
3. Inspect before installing and every use; do not use if wires
are loose, damaged, or worn. If wires come loose or are
missing, discontinue use immediately and discard wheel.
4. Use as intended only. Use on tool with spindle that
matches arbor and guards appropriate for wire wheels.
Avoid applying heavy pressure to prevent wire breakage.
5. Disconnect tool from power before installing.
6. Keep away from children. 17e
SAVE THESE WARNINGS
  • Page 1 1
  • Page 2 2

WARRIOR 67864 Owner's manual

Type
Owner's manual
This manual is also suitable for

WARRIOR Item 67864-UPC 193175316127 is a wire brush that can be used for a variety of tasks, including removing rust, paint, and other debris from metal surfaces. The brush is made of high-quality steel wire that is durable and long-lasting. It has a 1/4-inch arbor that fits most power tools. The brush can be used at speeds up to 4,500 RPM.

Some of the possible use cases for the WARRIOR Item 67864-UPC 193175316127 wire brush include:

  • Removing rust from metal surfaces
  • Removing paint from metal surfaces
  • Removing other debris from metal surfaces
  • Cleaning tools and equipment
  • Polishing metal surfaces

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI