Philips WP3922/00 Datasheet

Category
Water filters
Type
Datasheet

Philips WP3922/00 is a replacement filter for on-tap purifiers that uses a multi-filtration system to remove bacteria, harmful organic compounds, chlorine, and lead, while preserving beneficial minerals. It has a filter lifetime of 1500 liters or approximately 3 months and features a Quick Twist mechanism for easy filter replacement.

Philips WP3922/00 is a replacement filter for on-tap purifiers that uses a multi-filtration system to remove bacteria, harmful organic compounds, chlorine, and lead, while preserving beneficial minerals. It has a filter lifetime of 1500 liters or approximately 3 months and features a Quick Twist mechanism for easy filter replacement.

Philips
Replacement filter for on
tap purifier
Micro X-Pure
WP3922
Pure water made easy
Micro X-Pure filter
Advanced filtration system based on hollow fiber membrane and ion exchanger that
removes bacteria, harmful organic compounds, chlorine and lead. It improves taste and
smell and preserves good minerals in your water.
Pure water
Removes bacteria, soluble lead & harmful organic compounds
Made easy
Advanced Quick Twist mechanism for easy filter replacement
Issue date 2010-12-21
Version: 3.7.1
12 NC: 0000 000 00000
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
WP3922/00
Replacement filter for on tap purifier
Micro X-Pure
Highlights
Micro X-Clean filter
The Micro X-Clean is multi-filtration system. It
consists of a hi-tech hollow-fibre membrane, which
contains more than 300 billion micro-pores for the
efficient removal of 99.99% of all bacteria, an ion
exchanger to remove harmful soluble lead, a fine
granular activated carbon to remove the harmful
chlorination by-products, harmful industrial
pollutants such as volatile organic chemicals, and
agricultural pollutants such as the pesticide CAT. It
also removes unpleasant chlorine, bad taste and
odors. The filter preserves the good minerals in
drinking water that are vital for human health.
Quick Twist filter change
The advanced Quick Twist filter change mechanism
makes changing the filter quick, easy and secure,
bringing sense and simplicity to your water purifier.
General specifications
•Water flow rate: 5 °C
•Water flow rate: 1.6 l/min
Design specifications
Color(s): white
Product weight: 180 g
Product dimensions (L x W x H): 60 x 64 x
10
5 mm
Materials: plastic
Purification system
Bacteria removal: 99.99 %
Chlorine removal: >75 %
Turbidity removal: 3000 liters or approx. 1 year
•VOC Removal
•Hormones removal
•Pesticides removal
Filter specifications
Filter lifetime: 1500 L or approx. 3 months
Major filter components: hol
low-fiber membrane,
granular activated carbon GAC, ion exchanger,
pre-filter of sediments
Water input conditions
Min. input water pressure: 0.7 bar
Max. input water pressure: 3.5 bar
Max. input water temperature: 50 °C
Country of origin
Replacement filter: Japan
Sustainability
Packaging: > 90% recycled materials
  • Page 1 1
  • Page 2 2

Philips WP3922/00 Datasheet

Category
Water filters
Type
Datasheet

Philips WP3922/00 is a replacement filter for on-tap purifiers that uses a multi-filtration system to remove bacteria, harmful organic compounds, chlorine, and lead, while preserving beneficial minerals. It has a filter lifetime of 1500 liters or approximately 3 months and features a Quick Twist mechanism for easy filter replacement.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI