Frost King EZ833CDSP Installation guide

Type
Installation guide
Instructions/Assembly EZ833CDSP & EZ86CDSP
EZ Dispenser 3 Pack Heavy Duty Window Kit & EZ Dispenser Patio Heavy Duty Window Kit
1. Affix Three strips of double sided tape to two sides and bottom of window, u-shape
2. Pull out window film, w/ pre-taped top edge, out of canister, and affix to top of the window
3. Slide cutter down on side of the canister to trim window film to width of window
4. Unfold window film and affix to double sided tape
5. Shrink window film with hair dryer and trim excess film from sides
  • Page 1 1

Frost King EZ833CDSP Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages