Frost King EZ Roll Cylinder Shrink Window Kit Installation guide

Brand
Frost King
Model
EZ Roll Cylinder Shrink Window Kit
Type
Installation guide

This manual is also suitable for

Instructions/Assembly EZ833CDSP & EZ86CDSP
EZ Dispenser 3 Pack Heavy Duty Window Kit & EZ Dispenser Patio Heavy Duty Window Kit
1. Affix Three strips of double sided tape to two sides and bottom of window, u-shape
2. Pull out window film, w/ pre-taped top edge, out of canister, and affix to top of the window
3. Slide cutter down on side of the canister to trim window film to width of window
4. Unfold window film and affix to double sided tape
5. Shrink window film with hair dryer and trim excess film from sides
  • Page 1 1

Frost King EZ Roll Cylinder Shrink Window Kit Installation guide

Brand
Frost King
Model
EZ Roll Cylinder Shrink Window Kit
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents