Pelican Water PC300-I User manual

Type
User manual

Pelican Water PC300-I is a compact water filtration system that provides clean, healthy water for your home.

The PC300-I is easy to install and maintain, and it comes with a lifetime warranty. It features a three-stage filtration process that removes sediment, chlorine, and iron from your water.

The first stage of filtration uses a sediment filter to remove dirt, sand, and other particles from your water. The second stage uses a chlorine filter to remove chlorine and other chemicals from your water. The third stage uses an iron filter to remove iron and other metals from your water.

The PC300-I is a great choice for homes with well water or city water that is high in sediment, chlorine, or iron. It can also be used to improve the taste and smell of your water.

Pelican Water PC300-I is a compact water filtration system that provides clean, healthy water for your home.

The PC300-I is easy to install and maintain, and it comes with a lifetime warranty. It features a three-stage filtration process that removes sediment, chlorine, and iron from your water.

The first stage of filtration uses a sediment filter to remove dirt, sand, and other particles from your water. The second stage uses a chlorine filter to remove chlorine and other chemicals from your water. The third stage uses an iron filter to remove iron and other metals from your water.

The PC300-I is a great choice for homes with well water or city water that is high in sediment, chlorine, or iron. It can also be used to improve the taste and smell of your water.

1. Unpackage and account for all items before starting installation.
2. Determine location and water ow direction for system.
3. Install covers onto bracket orientating the INLET and OUTLET
correctly. Use 4 bolts and washers in each cover to attach.
Assembly
A. (12) Machine Bolts & Washers
B. (3) Lag Bolts & Washers
C. (1) Spanner Wrench
D. (3) 20” Housings w/Covers
E. (1) Sediment Cartridge
F. (1) Chloramine Cartridge
G. (1) Radial Flow Iron Cartridge
H. (1) Mounting Bracket
I. (3) Decals
J. (1) Silicone Grease
Items Included:
MODEL: PC-300-I
Specications:
Rated Service Flow 5 gpm Iron < 3 ppm
Minimum Working
Pressure
25 psi Iron Bacteria None
Maximum Working
Pressure
80 psi Hydrogen Sulde None
Operating
Temperatures
36°F - 120°F Silica <100 ppm
PH Range
>7.0
Manganese < 0.05 ppm
Radial Flow
Iron Cartridge
(Install as Shown)
Housing Cover
Housings
Stand Pipe
O-Ring
© Pelican Water Systems 3060 Performance Circle • Deland, FL • 32724 877-842-1635
EZ CONNECT COMPACT WATER FILTRATION SYSTEM
eco
A
E F
B
C
D
G
H I
J
Fig. A
PC-
300-I-RevB-0119
P
elicanW
ater.com
1. Install bracket to wall using appropriate fasteners (3 qty, 5/16” x 2” stainless lag bolts included).
2. Once the bracket is mounted you can now attach your plumbing to the INLET and OUTLET with 1” male threaded adaptions
(not included). (Plumbing a shut off valve prior and a bypass around the unit is recommended).
3. Apply corresponding decals to each of the covers as shown. (Sediment on Inlet side, Chloramine in middle, Radial Flow Iron
on Outlet side).
4. Unwrap cartridges and insert into each of the housings centering on the stand pipe.
5. Thread housings onto the corresponding covers counter clockwise. Snug housings (Do Not Over-tighten).
6. Slowly turn on water main to fill housings.
7. Open the nearest faucet and run water for 10 minutes to expel any
carbon fines.
8. After 10 minutes turn off faucet.
9. Your system is now ready for use.
Installation
Top of Pelican EZ Connect PC-300-I
Front of Pelican EZ Connect PC-300-I
WARNING:
If this or any other system is installed in a metal (conductive) plumbing system, i.e. copper or galvanized metal, the plastic
components of the system will interrupt the continuity of the plumbing system. As a result any errant electricity from improperly
grounded appliances downstream or potential galvanic activity in the plumbing system can no longer ground through
contiguous metal plumbing. Some homes may have been built in accordance with building codes, which actually encouraged
the grounding of electrical appliances through the plumbing system. Consequently, the installation of a bypass consisting of the
same material as the existing plumbing, or a grounded “jumper wire” bridging the equipment and reestablishing the contiguous
conductive nature of the plumbing system must be installed prior to your systems use.
Cartridge Replacement
1. Turn off main water supply
2. Open the nearest faucet (leave open)
3. Open drain on the bottom of Housing to drain water
4. Apply wrench to housing & turn clockwise to loosen (to the left)
5. Remove and discard old O-ring and cartridge
6. Unwrap and install a new cartridge centering on stand pipe
7. Install a new O-ring lubricated with food grade silicone grease
8. Re-install housing and tighten
(Do not over tighten)
9. Turn main water supply on slowly to allow the
system to ll, the air will expel through the open
faucet
* When replacing the chloramine cartridge, you will need to run
water at the nearest faucet for 10 minutes to expel any carbon
nes.
10. Close faucet and check for leaks
Maintenance:
- The Sediment, Chloramine and Radial Flow cartridges will need to be replaced approximately every 3 to 6
months depending on water chemistry.
© Pelican Water Systems 3060 Performance Circle • Deland, FL • 32724 877-842-1635
PC-
300-I-RevB-0119
P
elicanW
ater.com
3060 Performance Circle • Deland, FL • 32724 877-842-1635
Warranty
Pelicans Limited Lifetime Warranty
Pelican Water ("Pelican") warrants to the end user ("customer") that its tanks (13" and smaller), valves, in/out non-electric
heads, bypass's, fittings and housings for POE systems ("Covered Items") will be free from defects in material and workmanship
under normal use and service for a limited lifetime of twelve (12) years from the date of original purchase**.
Limitations and Responsibilities
Pelican's obligation to the customer under these warranties shall be limited, at Pelican's option, to replacement or repair of
Covered Items by these warranties, labor is not covered. These warranties do not cover replacement filter cartridges, elements
or lamps. Prior to return or repair of Covered Items, the customer must obtain a return goods authorization number from Pelican
by/at and at Pelicans option, return the Covered Items freight prepaid. Any Covered Item repaired or replaced under these
warranties will be returned prepaid standard freight to the original point of shipment. Expedited freight options are available at
customer expense.
No warranty is made, and is explicitly excluded, with respect to defects or damages due to neglect, misuse, alterations, accident,
misapplication, physical damage, or damaged caused by fire, acts of God, or freezing. These warranties apply only to the
original registered owner so long as the owner owns/lives in the home in which the unit was originally installed. Customer must
register their system with Pelican within 90 days of purchase* in order to obtain a warranty. Warranty will discontinue after the
unit is removed from the location where it was originally installed. Warranty begins on the date of delivery of product to the
customer. Improper maintenance of system (ie not replacing filters or media, for example) on time will be considered "neglect"
and explicitly excluded from the warranty. Installation of any system on water conditions outside of or beyond the recommended
specs of any system voids any warranty.
Pelican gives this warranty to the original owner/customer in lieu of all other warranties, express or implied, including without
limitation any implied warranties of merchantability or fitness for a particular purpose or treatment of certain water and hereby
expressly disclaims all other such warranties. THE WARRANTIES PELICAN GIVES IN THE ABOVE PARAGRAPHS ARE
EXCLUSIVE, PELICAN DISCLAIMS ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY AND SPECIFICALLY
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED
WARRANTY OF WORKMANLIKE PERFORMANCE. Pelican's liability hereunder shall not exceed the cost of the product.
Under no circumstances will Pelican be liable for any incidental or consequential damages or for any other loss, damage or
expense of any kind, including loss of use, arising in connection with the installation or use or inability to use the Covered Items
or any water treatment system the Covered Items are incorporated into. These warranties are governed by the laws of the state
of Florida and may change at any time without notice..
*Failure by California and Quebec residents to complete the product registration form does not diminish their warranty rights.
**For all orders placed on or after June 3rd, 2011.
MODEL: PC-300 I
EZ CONNECT COMPACT WATER FILTRATION SYSTEM
eco
© Pelican Water Systems 2019
PC-3
00-I-RevB-0119
P
elicanW
ater.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Pelican Water PC300-I User manual

Type
User manual

Pelican Water PC300-I is a compact water filtration system that provides clean, healthy water for your home.

The PC300-I is easy to install and maintain, and it comes with a lifetime warranty. It features a three-stage filtration process that removes sediment, chlorine, and iron from your water.

The first stage of filtration uses a sediment filter to remove dirt, sand, and other particles from your water. The second stage uses a chlorine filter to remove chlorine and other chemicals from your water. The third stage uses an iron filter to remove iron and other metals from your water.

The PC300-I is a great choice for homes with well water or city water that is high in sediment, chlorine, or iron. It can also be used to improve the taste and smell of your water.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI