Eurotech DuraCOR DC 1400 Owner's manual

Rev 1.0 - January 2010 - S8308MAN-S00

DIGITAL TECHNOLOGIES FOR A BETTER WORLD

www.eurotech.com

USER MANUAL

DC-1400

Trademarks

All trademarks both marked and unmarked appearing in this document are the property of their

respective owners.

Revision History

REVISION DESCRIPTION DATE

1.0 First release January 2010

Table of Contents

3

Table of Contents

Trademarks .................................................................................................................................................... 2

Revision History ............................................................................................................................................. 2

Table of Contents ............................................................................................................................................ 3

Important User Information ............................................................................................................................ 5

Safety Notices and Warnings ......................................................................................................................... 5

Installation in Cupboards and Safes ......................................................................................................... 5

Do Not Operate in an Explosive Atmosphere ........................................................................................... 5

Keep Away From Live Circuits ................................................................................................................. 5

Do Not Operate in an Explosive Atmosphere ........................................................................................... 5

Alerts that can be found throughout this manual ...................................................................................... 5

Use an Appropriate Power Supply ........................................................................................................... 6

Antistatic Precautions ............................................................................................................................... 6

Life Support Policy ......................................................................................................................................... 6

Warranty ......................................................................................................................................................... 6

CE Notice ....................................................................................................................................................... 6

Compliance to European R&TTE Directive .................................................................................................... 7

WEEE ............................................................................................................................................................. 7

RoHS .............................................................................................................................................................. 7

Technical Assistance ..................................................................................................................................... 8

Device labelling ......................................................................................................................................... 8

Product Overview ............................................................................................................................................ 9

Product specifications .................................................................................................................................. 10

Optional Accessories ................................................................................................................................... 11

Front Panel Layout ....................................................................................................................................... 11

LED indicators Functionality ................................................................................................................... 11

Rear Panel Layout ....................................................................................................................................... 12

Product Interfaces ......................................................................................................................................... 13

Rear Panel Interfaces .................................................................................................................................. 13

M1 connector .......................................................................................................................................... 13

M2 connector .......................................................................................................................................... 13

M3 connector .......................................................................................................................................... 14

M4 connector .......................................................................................................................................... 14

M5 connector .......................................................................................................................................... 15

SIM1 - SIM2 connector ........................................................................................................................... 15

Front Panel Interfaces (for maintenance) .................................................................................................... 16

Features Availability ...................................................................................................................................... 17

Wireless Features ........................................................................................................................................ 17

Main Wireless LAN Features .................................................................................................................. 17

Main HSUPA/UMTS/EDGE features ...................................................................................................... 19

Main GPS features ................................................................................................................................. 20

Isolated Digital I/Os ...................................................................................................................................... 21

Isolated Digital Inputs (DIN1 to DIN6 and DIN8) .................................................................................... 21

Isolated Digital Input 7 (DIN7) ................................................................................................................ 22

Isolated Digital Outputs DOUT1 to DOUT5 ............................................................................................ 23

Serial Ports ................................................................................................................................................... 24

Ethernet Ports .............................................................................................................................................. 25

USB Ports .................................................................................................................................................... 25

Audio Ports ................................................................................................................................................... 25

DC-1400 - User Manual

4

S8308MAN-S00

Hardware Monitor (I2C) ................................................................................................................................ 26

Battery .......................................................................................................................................................... 26

System Installation and Use ......................................................................................................................... 27

Unpacking .................................................................................................................................................... 27

Usage ........................................................................................................................................................... 27

Installation Notes .......................................................................................................................................... 28

Mounting information .................................................................................................................................... 29

Electrical Connections .................................................................................................................................. 31

Earth bonding ......................................................................................................................................... 31

Cable separation instructions ................................................................................................................. 31

Powering the system .............................................................................................................................. 32

Connecting the serial ports ..................................................................................................................... 32

Connecting Audio devices ...................................................................................................................... 32

Operating System Information ..................................................................................................................... 33

I/O Devices ..................................................................................................................................................... 35

Related Documents ...................................................................................................................................... 35

The “I/O Devices” Software interface ........................................................................................................... 35

Registers in detail ................................................................................................................................... 36

Appendix ........................................................................................................................................................ 39

Physical Characteristics ............................................................................................................................... 39

Operating Characteristics ....................................................................................................................... 39

Environmental specifications .................................................................................................................. 39

Mechanical Characteristics ..................................................................................................................... 40

Acronyms and Abbreviations ....................................................................................................................... 41

Eurotech Worldwide Presence ..................................................................................................................... 43

Important User Information

5

Important User Information

In order to lower the risk of personal injury, electric shock, fire or damage to equipment, users

must observe the following precautions, as well as good technical judgment, whenever

installing or using the product.

Eurotech S.p.A has made every effort to ensure the accuracy of this document; however, Eurotech

S.p.A. assumes no liability resulting from any error/omission in this document, or from the use of the

information contained herein.

Eurotech reserves the right to revise this document and to change its contents at any time without

obligation to notify any person of such revision or changes.

Safety Notices and Warnings

Users must observe the following safety precautions during all phases of operation, service, and repair

of the equipment. Failure to comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards of design, manufacture, and intended use of the equipment.

Eurotech S.p.A. assumes no liability for the customer’s failure to comply with these requirements.

The safety precautions listed below represent warnings of certain dangers of which Eurotech is aware.

You, as the user of the product, should follow these warnings and all other safety precautions

necessary for the safe operation of the equipment in your operating environment.

Installation in Cupboards and Safes

When installing the product within a cupboard or safe, together with other heat generating equipment,

ensure appropriate ventilation.

Do Not Operate in an Explosive Atmosphere

Do not operate the equipment in the presence of flammable gases or fumes. Operation of any

electrical equipment in such an environment constitutes a definite safety hazard.

Keep Away From Live Circuits

Operating personnel must not remove equipment covers. Only Factory Authorized Service Personnel

or other qualified maintenance personnel may remove equipment covers for internal subassembly or

component replacement or any internal adjustment. Do not replace components with power cable

connected. Under certain conditions, dangerous voltages may exist even with the power cable

removed. To avoid injuries, always disconnect power and discharge circuits before touching them.

Do Not Operate in an Explosive Atmosphere

Do not operate the equipment in the presence of flammable gases or fumes. Operation of any

electrical equipment in such an environment constitutes a definite safety hazard.

Alerts that can be found throughout this manual

The following alerts indicate potentially dangerous situations:

Danger, electrical shock hazard:

Information highlighting potential electrical shock hazards:

• Personal injury or death could occur.

• Damage to the system, connected peripheral devices, or software could occur.

Therefore, appropriate safety precautions should always be used, and these should meet the requirements

set out for the environment that the equipment will be deployed in.

DC-1400 - User Manual

6

S8308MAN-S00

Warning:

Information highlighting potential hazards:

• Personal injury or death could occur.

• Damage to the system, connected peripheral devices, or software could occur.

Therefore, appropriate safety precautions should always be used, and these should meet the requirements

set out for the environment that the equipment will be deployed in.

Information and/or Notes:

These will highlight important features or instructions.

Use an Appropriate Power Supply

• Only start the product with a power supply that conforms to the voltage requirements as displayed on

the voltage label attached to the system. In case of uncertainty, please contact your local Eurotech

Tech

nical Support Team (see page 8) or your local electricity authority.

• Only use power supplies that are compliant with the SELV regulations.

• Always use certified power cables. The power cable must meet the products’ voltage and current

requirements.

• Position cables with care. Avoid situation that may cause damage to the power cables. Take

particular care of the mains plug and sockets.

• Avoid over-loading power-points

Antistatic Precautions

To avoid ESD (Electro Static Discharge) damage, always use appropriate antistatic precautions when

handing any electronic equipment.

Life Support Policy

Users must not use Eurotech products as critical components of life support devices or systems

without the express written approval of Eurotech S.p.A.

Warranty

Please contact your local Eurotech Sales Office for detailed warranty terms and conditions.

Refer to the back covers of this manual for full contact details.

CE Notice

This product has the CE labelling in accordance with the 1999/5/EC regulations.

Eurotech shall not be liable for use of its products with equipment (i.e. power

supplies, personal computers, etc.) that are not CE marked.

Important User Information

7

Compliance to European R&TTE Directive

This Product is intended for operation in the following Member States and other countries that

implement the R&TTE Directive: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland, Turkey and the United Kingdom.

In accordance to article 6(3) of 1999/5/EC, Eurotech herewith inform you about the national restrictions

and requirements for authorization in the following countries (see table below). The requirements for

any country may evolve. Eurotech recommends that you check with local authorities for the

latest status of their national regulations for both 2.4 and 5 GHz wireless LANs.

Frequency Band Restrictions RF - Radiated Power Comments

2400 - 2454 MHz None 100 mW EIRP Class 1

2400 - 2483.5 MHz None 10 mW EIRP Class 1

2454 - 2483.5 MHz Yes 100 mW EIRP Class 2

5150 - 5250 MHz Yes Class 2

5250 - 5350 MHz Yes Class 2

5470 - 5725 MHz Yes Class 2

Warning:

Despite careful research on the subject, there may be some regulations in countries that are not mentioned.

If you are uncertain about your national regulations, please see specific information at:

http://ec.europa.eu/enterprise/rtte/spectr.htm and http://www.ero.dk/rtte

WEEE

The information below complies with the regulations set out in the 2002/96/EC directive, subsequently

superseded by 2003/108/EC. It refers electrical and electronic equipment and the waste management

of such products.

When disposing of a device, including all of its components, subassemblies and materials that are an

integral part of the product, you should consider the WEEE directive.

The use of the following symbol, attached to the equipment, packaging, instruction

literature, or the guarantee sheet, states that the device has been marketed after August

13th 2005, and implies that you must separate all of its components when possible, and

dispose of them in accordance with local waste disposal legislations:

• Because of the substances present in the equipment, improper use or disposal of the refuse can

cause damage to human health and the environment.

• With reference to WEEE, it is compulsory not to dispose of the equipment with normal urban refuse;

an arrangement for separate collection and disposal is essential.

• To avoid any possible legal implications users should contact the local waste collection body for full

recycling information.

RoHS

This device, including all the components, subassemblies and the consumable materials that are an

integral part of the product, have been manufactured in compliance with the European directive

2002/95/EC known as the RoHS directive (Restrictions of the use of certain Hazardous Substances).

This directive targets the reduction of certain hazardous substances previously used in electrical and

electronic equipment (EEE).

DC-1400 - User Manual

8

S8308MAN-S00

Technical Assistance

For any technical questions, or if you cannot isolate a problem with your device, or for any enquiry

about repair and returns policies, feel free to contact your local Eurotech Technical Support Team.

Refer to the back covers of this manual for full contact details.

Transportation

When transporting any module or system, for any reason, it should be packaged using anti-static

material and placed in a sturdy box with sufficient packing material to prevent damage.

Warning:

The products warranty will be void if any product returned to Eurotech and damaged as a direct result of

incorrect packaging or insufficient packaging!

Device labelling

On the exterior of the system, you will find a label that displays the following information:

• Model Number

• Serial Number

• Power Requirements

Figure 1. Label location

Figure 2. Example of label location

Product Overview

9

Product Overview

The DC-1400 is a system ideal for developing applications that require a combination of precise GPS

positioning and wireless communication using either Wi-Fi or modern high speed cellular networks.

Multiple Ethernet ports can be used to interface external devices such as IP-cameras, IP-based digital

signage subsystems and other networked vehicle devices.

Four audio input and four audio output channels allow for the management of a broad selection of

audio devices. Multiple serial ports can be used to connect serial devices such as radio communication

devices.

The DC-1400 is available in several configurations with a wide choice of x86 processors.

Figure 3. DC-1400: front and rear view

DC-1400 - User Manual

10

S8308MAN-S00

Product specifications

FEATURE DESCRIPTION

Processor and Memory

DC-1400-01: Intel Atom, 1.6 GHz Processor; 1 GB RAM; 2 GB Flash

DC-1400-02: Intel Celeron M, 1 GHz Processor; 512 MB RAM; 2 GB DOM

DC-1400-03: Intel Celeron 400, 400 MHz Processor; 256 MB RAM; 2 GB DOM

Mass storage 50 GB Automotive class HDD (-40°C to 85°C qualified)

Wireless features

Localization:

• GPS: 12-ch GPS receiver; external antenna required

Communication:

• WWAN: Tri-band UMTS/HSUPA (up to 7.2 Mbps downlink) and quad-band

EDGE/GPRS/GSM (up to 216 kbps downlink); external antenna required

• WLAN: Wi-Fi 802.11 a, b, g; external antenna required

Communication ports

• 1x 10/100 Mbps Ethernet port

• 4x 10/100 Mbps Ethernet switch (unmanaged)

• 2x USB2.0 High speed ports

• 1x CAN Bus 2.0B

• 10x Serial Ports

o 9x RS232

o 1x RS232/422/485

• Audio

o Line IN, Line OUT, Microphone IN (for DC-1400-02 and DC-1400-03)

o 4x Stereo Line Inputs and 4x Stereo Line Outputs provided by the INT-1410

audio matrix module (for all DC-1400 versions)

Isolated Digital I/O

(Isolation: 500VAC for 1 minute)

• 7x Isolated digital inputs + 1 reserved as “ignition switch input”

• 5x Isolated digital outputs

Maintenance interfaces

• 1x Maintenance connector

• 1x Keyboard / Mouse connector

• 1x VGA connector

• 1x Reset pushbutton

Power Consumption 12 / 24 V DC; 2.4 / 1.2 A

Operating Temperature

• 0 to +55 °C (for DC-1400-01)

• -25 to +55 °C (for DC-1400-02 and DC-1400-03)

Storage Temperature range -40 to +85 °C

Non-Condensing Relative Humidity <95% at 40 °C

Maximum Weight 3 Kg

Dimensions (L x W x H) 254 x 129 x 109 mm

IP Rating IP65 (NEMA 4X)

Software

• Operating System: Linux (kernel 2.6)

• Optional: Eurotech Software Framework (ESF)

• Contact Eurotech for further options

Peripherals & Accessories

• Cable set with standard connectors for peripherals and I/O connection

• Wi-Fi dual-band antenna

• GPS magnetic mount antenna kit

• HSDPA penta-band antenna kit

The system integrates the following Eurotech modules:

MODEL PC/104-Plus CPU MODULE PC/104 ADD-ON MODULES

DC-1400-01

ISIS with Intel Atom Processor

• COM-1274-NI: PC/104 module with 8 serial ports and up to 2

TTL CAN ports

• COM-1480: PC/10-Plus module with HSDPA and GPS

• COM-1452: PC/104-Plus Multi-Ethernet module with 5 Fast

Ethernet Controllers

• INT-1410: PC/104-Plus module with 4 CODEC audio matrix

DC-1400-02

CPU-1472 with Intel Celeron M Processor

DC-1400-03

CPU-1452 with Intel Celeron 400 Processor

Note:

Within the individual User Manuals there could be some features mentioned that are not available in this

equipment or they could be referred to by other names.

Further information regarding the integrated modules can be found in the corresponding User Manual,

available from: www.eurotech.com/en/download

Product Overview

11

Note:

The power ON and OFF is controlled by a dedicated digital input (Digital IN8).

There is an auto-retention circuit for controlling the power down procedure via software.

Optional Accessories

ACCESSORY DESCRIPTION REFERENCE DOCUMENT

CBL-1020-00

DuraCOR Cable Kit for M1: Power, Switch, 1x Ethernet, 1x Digital I/O Technical Datasheet Td0009

CBL-1021-00 DuraCOR Cable Kit for M2: 2x USB, 2x COM, 3x Audio Technical Datasheet Td0010

CBL-1024-00 DuraCOR Cable Kit for M3 / M5: 4x Ethernet Technical Datasheet Td0013

CBL-1027-00 DuraCOR Cable Kit for M4: 8x COM, 1x CAN, 1x VGA Technical Datasheet Td0016

CBL-1031-00

DuraCOR Cable Kit for M3: 8x Stereo Jack Sockets Technical Datasheet Td0037

ACS-9110-01

HSDPA / HSUPA Penta-Band Antenna Kit Technical Datasheet Td0033

ACS-9111-00

GPS Magnetic Mount Antenna Kit Technical Datasheet Td0006

ACS-9112-00 Wi-Fi Dual-band Antenna Kit Technical Datasheet Td0021

Technical Datasheets can be downloaded from http://www.eurotech.com/en/Technical Datasheets.aspx

Front Panel Layout

The front panel has the maintenance interfaces. This allows for in-field maintenance operations without

removing the system from its mountings.

Figure 4. Front panel layout

LED indicators Functionality

LED NUMBER FUNCTION COMMENTS

1

Power Present Illuminated when the input voltage is present

2

Power On Illuminated when the system is powered on

3 to 6

User Configurable Software programmable

Table 1. LED indicators functionality

LED indicators Service panel

DC-1400 - User Manual

12

S8308MAN-S00

Rear Panel Layout

The rear panel has the general interface connections.

Figure 5. Rear panel layout

INTERFACE CONNECTOR TYPE FUNCTIONS

A1

Female SMA

• Wi-Fi Antenna

A2

Female SMA

• WWAN Antenna

A3

Female SMA

• GPS Antenna

M1

Male circular connector:

• Type: Size 17; 28-pin

• P/N: AMP 205840-3

• Power Supply (VIN)

• Digital I/O

o 8x Digital Input (DIN1 to DIN8)

o 5x Digital Output (DOUT1 to DOUT5)

• 1x Ethernet 10/100 Mbps, from CPU (ETH1)

M2

Female circular connector:

• Type: Size 17; 28-pin

• P/N: AMP 206038-1

• 2x Serial Ports (SER1 and SER2)

o 1x 5 wires (RX, TX, RTS, CTS and GND)

RS232 serial port (Serial1)

o 1x Full RS232/422/485 BIOS

configurable serial port (Serial2)

• 2x USB 2.0 high speed ports (USB1 and USB2)

• Audio: Line IN, Line OUT, Microphone IN

(for DC-1400-02 and DC-1400-03)

M3

Female circular connector:

• Type: Size 17; 28-pin

• P/N: AMP 206038-1

• 4x Audio Input Interfaces

• 4x Audio Output Interfaces

M4

Female circular connector:

• Type: Size 23; 57-pin

• P/N: AMP 206438-1

• 8x Not isolated Serial Ports (COM1 to COM8)

• 1x CAN Port (CAN1)

M5

Female circular connector:

• Type: Size 17; 28-pin

• P/N: AMP 206038-1

• 4x switched Ethernet Ports (ETH2 to ETH5)

SIM1, SIM2

• Remote SIM card holder (only SIM1 is

available)

Table 2. Rear panel interfaces description

A1 A2 A3

M2

M3

M1

M4

M5

SIM1

SIM2

Product Interfaces

13

Product Interfaces

Rear Panel Interfaces

M1 connector

Figure 6. M1 layout

PIN# SIGNAL PIN# SIGNAL

1 VIN + 15 DIN A-K 4

2 VIN - 16 DIN A-K 8 (Key)

3 DIN A-K 1 17 DIN K-A 4

4 DIN A-K 5 18 DIN K-A Common 8 (Key)

5 DIN K-A 1 19 DOUT1

6 DIN K-A 5 20 DOUT2

7 DIN A-K 2 21 DOUT3

8 DIN A-K 6 22 DOUT4

9 DIN K-A 2 23 DOUT5

10 DIN K-A 6 24 DOE

11 DIN A-K 3 25 ETH1 RX +

12 DIN 7 26 ETH1 TX +

13 DIN K-A 3 27 ETH1 TX -

14 DIN 7_GND 28 ETH1 RX -

Table 3. M1 pinout

M2 connector

Figure 7. M2 layout

PIN# SIGNAL PIN# SIGNAL

1 Serial1 CTS 15 USB1 GND

2 Serial1 RX 16 USB2 GND

3 Serial2 DSR 17 Microphone IN

4 Serial2 RTS 18 Audio Line Left OUT

5 Serial2 CTS 19 Audio Line Left IN

6 Serial2 RI 20 Audio Line Right IN

7 Serial2 DTR 21 USB1 Data -

8 Serial2 TX 22 USB2 Data -

9 Serial2 RX 23 USB1 Data +

10 Serial2 DCD 24 USB2 Data +

11 Serial1 GND 25 USB1 VDD

12 Serial2 GND 26 USB2 VDD

13 Audio GND 27 Serial1 TX

14 Audio Line Right OUT 28 Serial1 RTS

Table 4. M2 pinout

Note:

By default, the serial ports are in RS232 mode.

SER2 is configurable in RS232/RS422/RS485 modalities

Signal changes when in RS422 or RS485 modes:

RS232 MODE RS422 MODE RS485 MODE

Data Carrier Detect (DCD) Transmit Data - (TX -) Transmit Data - / Receive Data - (TX - / R X -)

Receive Data (RX) Transmit Data + (TX +) Transmit Data + / Receive Data + (TX + / RX +)

Transmit Data (TX) Receive Data - (RX -) Not Used

Data Terminal Ready (DTR) Receive Data + (RX +) Not Used

31

8 4

14 9

20 15

25 21

28 26

13

4 8

9 14

15 20

21 25

26 28

DC-1400 - User Manual

14

S8308MAN-S00

Note:

Serial1 and Serial2 are configured by the Setup of the CPU module.

If the Serial port is used in RS485 mode, the bi-directional line must be controlled via software, using the

Data Terminal Ready (DTR) signal of the serial controller. This signal is defined by bit ‘0’ of the UART

Modem Control Register (MCR) and the bi-directional line is controlled as follows:

• Bit ‘0’ of the MCR register = ‘0’ means RS485 line receiving

• Bit ‘0’ of the MCR register = ‘1’ means RS485 line transmitting

The I/O address of the MCR is the Serial port Base address +4h

The 120 Ohms termination resistor is absent.

M3 connector

Figure 8. M3 layout

PIN# SIGNAL PIN# SIGNAL

1 Audio3 IN + 15 Audio5 IN +

2 Audio3 IN - 16 Audio5 IN -

3 Audio3 IN GND 17 Audio5 IN GND

4 NC 18 Audio5 OUT +

5 Audio3 OUT + 19 Audio5 OUT -

6 Audio3 OUT - 20 Audio5 OUT GND

7 Audio3 OUT GND 21 NC

8 NC 22 Audio6 IN +

9 Audio4 IN + 23 Audio6 IN -

10 Audio4 IN - 24 Audio6 IN GND

11 Audio4 IN GND 25 NC

12 Audio4 OUT + 26 Audio6 OUT +

13 Audio4 OUT - 27 Audio6 OUT -

14 Audio4 OUT GND 28 Audio6 OUT GND

Table 5. M3 pinout

M4 connector

Figure 9. M4 layout

PIN# SIGNAL PIN# SIGNAL PIN# SIGNAL

1 COM1 DCD 20 COM6 RX 39 COM4 DTR

2 COM1 RX 21 COM6 GND 40 COM8 RX

3 COM1 RTS 22 COM6 TX 41 COM8 RTS

4 COM1 TX 23 COM6 RTS 42 COM8 TX

5 COM1 CTS 24 COM6 CTS 43 COM8 CTS

6 COM1 DTR 25 COM3 DCD 44 CAN High

7 COM1 GND 26 COM3 RX 45 CAN Low

8 COM5 GND 27 COM3 TX 46 CAN GND

9 COM5 RX 28 COM3 DTR 47 COM8 GND

10 COM5 RTS 29 COM3 GND 48 NC

11 COM5 TX 30 COM7 GND 49 NC

12 COM5 CTS 31 COM7 RX 50 NC

13 COM2 DCD 32 COM7 RTS 51 NC

14 COM2 RX 33 COM7 GND 52 NC

15 COM2 RTS 34 COM7 TX 53 NC

16 COM2 TX 35 COM7 CTS 54 NC

17 COM2CTS 36 COM4 DCD 55 NC

18 COM2 DTR 37 COM4 RX 56 NC

19 COM2 GND 38 COM4 TX 57 NC

Table 6. M3 pinout

31

8 4

14 9

20 15

25 21

28 26

Product Interfaces

15

M5 connector

Figure 10. M5 layout

PIN# SIGNAL PIN# SIGNAL

1 ETH1 TX+ 15 ETH4 TX+

2 ETH1 TX- 16 ETH4 TX-

3 Reserved 17 ETH4 RX+

4 ETH1 RX+ 18 ETH4 RX-

5 ETH1 RX- 19 Reserved

6 Reserved 20 Reserved

7 ETH2 TX+ 21 Reserved

8 ETH2 TX- 22 Reserved

9 ETH2 RX+ 23 Reserved

10 ETH2 RX- 24 Reserved

11 ETH3 TX+ 25 Reserved

12 ETH3 TX- 26 Reserved

13 ETH3 RX+ 27 Reserved

14 ETH3 RX- 28 Reserved

Table 7. M5 pinout

SIM1 - SIM2 connector

The SIM card used by the wireless devices is externally accessible via the SIM1 - SIM2 connector,

which is a double push-push (Push to lock/Push to eject) SIM card holder. Only slot 1 is available.

31

8 4

14 9

20 15

25 21

28 26

Insert the SIM card 1 with the

metal contacts facing down.

SIM card 1

DC-1400 - User Manual

16

S8308MAN-S00

Front Panel Interfaces (for maintenance)

On the front panel, there is the service panel that covers features useful for debugging and maintaining

the system. It is possible to remove the service panel by removing the two Torx T10 screws.

Warning:

The IP protection of the system will be degraded by the removal of the service panel

Figure 11. Removing the service panel

Maintenance connector

The usage of this connector is reserved.

Keyboard / Mouse port

This is a standard PS/2 interface for connecting a keyboard and mouse.

Within the CPU BIOS, the Mouse interface is disabled.

Note:

For connecting a Keyboard and Mouse together, use a standard “Y” cable adapter.

VGA port

This is a standard DB15 VGA monitor interface.

Reset pushbutton

When pressed performs a hardware reset of the system

Maintenance Keyboard / Mouse VGA Reset

Features Availability

17

Features Availability

Wireless Features

Main Wireless LAN Features

Note:

The A1 connector allows user to connect an antenna for the integrated Wi-Fi 802.11 a, b, g module.

Model: Unex CM10-HI Mini-PCI Wi-Fi module

Standards: IEEE802.11a/b/g

Frequency Range:

STANDARD FREQUENCY RANGE

IEEE802.11a 5.1500 ~ 5.3500 GHz & 5.7250 ~ 5.8500 GHz for US

4.9000 ~ 5.3500 GHz for Japan

5.1500 ~ 5.3500 GHz & 5.4700 ~ 5.7250 GHz for ETSI

5.7250 ~ 5.8500 GHz for China

IEEE802.11b/g 2.4000 ~ 2.4835 GHz for US, Canada, Japan, ETSI, and China

Modulation Technique:

STANDARD MODULATION TECNIQUE

IEEE802.11a OFDM with BPSK, QPSK, 16-QAM and 64-QAM

IEEE802.11b DSSS with CCK, DPSK and DBPSK

IEEE802.11g OFDM with BPSK, QPSK, 16-QAM and 64-QAM

DSSS with CCK, DQPSK and DBPSK

Date Rate:

STANDARD MODE DATA RATE [Mbps] NOTE

IEEE802.11a Normal 54, 48, 36, 24, 18, 12, 9, 6 Auto-fallback

Super 108,96,72,48,36,24,18,12 Auto-fallback

IEEE802.11b Normal 11, 5.5, 2, 1 Auto-fallback

IEEE802.11g Normal 54, 48, 36, 24, 18 ,12, 9, 6 Auto-fallback

Super Up to 108

Operating Range (subject to the environment and antenna):

STANDARD OUTDOOR RANGE INDOOR RANGE

IEEE802.11a 85 m @ 54 Mbps

350 m @ 6 Mbps

25 m @ 54 Mbps

60 m @ 6 Mbps

IEEE802.11b 350 m @ 11 Mbps

400 m @ 1Mbps

45 m @ 11 Mbps

70 m @ 1 Mbps

IEEE802.11g 90 m @ 54 Mbps

400 m @ 6 Mbps

30 m @ 54 Mbps

65 m @ 6 Mbps

DC-1400 - User Manual

18

S8308MAN-S00

Operating Channels:

STANDARD CHANNELS

IEEE802.11a USA/Canada: 12 non-overlapping channels

(5.150 ~ 5.350 GHz, 5.725 ~ 5.825 GHz)

Major Europe Countries: 19 non-overlapping channels

(5.150 ~ 5.350 GHz, 5.470 ~ 5.725 GHz)

Japan: 8 non-overlapping channels (5.150 ~ 5.350 GHz)

China: 5 non-overlapping channels (5.725 ~ 5.850 GHz)

IEEE802.11b/g USA/Canada: 11 (1~11)

Major Europe Countries: 13 (1~13)

France: 4 (10~13)

Japan: 14 for 802.11b (1~13 or 14th), 13 for 802.11g (1~13)

China: 13 (1~13)

Power Consumption:

STANDARD CONTINUE TX CONTINUE RX STANDBY MODE

IEEE802.11a 1100 mA (typical)

1300 mA (max)

250 mA (typical)

270 mA (max)

280 mA (typical)

290 mA (max)

IEEE802.11b 730 mA (typical)

780 mA (max)

200 mA (typical)

220 mA (max)

230 mA (typical)

240 mA (max)

IEEE802.11g 730 mA (typical)

780 mA (max)

240 mA (typical)

260 mA (max)

280 mA (typical)

290 mA (max)

Transmit Power Settings:

STANDARD TRANSMIT POWER SETTING

IEEE802.11a +22.5 dBm @ 6, 9, 12, 18, 24 Mbps

+21.5 dBm @ 36 Mbps

+18.0 dBm @ 54 Mbps

IEEE802.11b +24.0 dBm @ 1, 2, 5.5, 11 Mbps

IEEE802.11g +23.5 dBm @ 6, 9, 12, 18, 24 Mbps

+21.0 dBm @ 36 Mbps

+20.0 dBm @ 48 Mbps

+19.0 dBm @ 54 Mbps

Countries of Operation & Conditions of Usage

Combinations of power levels and antennas resulting in a radiated power level above 100 mW (EIRP)

are considered as non compliant with the directive 1999/5/EC and are not allowed for use within the

European Community and countries that have adopted the European R&TTE Directive 1999/5/EC or

the CEPT recommendation Rec. 70.03 or both. The system must be used with the described cable

and antenna.

Country code selector provides flexibility to change regulatory domains.

Inside the system there is the radio equipment model CM10-HI, produced by “Unex Corporation”

(having head offices located in Taiwan).

For usage of the radio equipment, please refer the documentation of Unex: www.unex.com.tw

.

This system has the hardware capabilities of a radio device. The European Member States

apply restrictions on the putting into service radio equipments as foreseen in Article 7(2) of

Directive 1999/5/EC and apply restrictions on the placing on the market as foreseen by

Article 9(5) of Directive 1999/5/EC.

The customer that complete this hardware with its software and produce the final radio equipment

must carry out all the formalities and the procedures that are required.

Note:

To comply with national regulations for RF devices the Wi-Fi subsection should be used with the Eurotech

ACS-9112-00 Wi-Fi dual band antenna. Refer to Technical Datasheet Td0021 downloadable from

http://www.eurotech.com/en/Technical Datasheets.aspx

.

Features Availability

19

Main HSUPA/UMTS/EDGE features

The HSUPA module is available from the integrated COM-1480 board.

Refer to the COM-1480 User Manual for further information.

It is downloadable from http://www.eurotech.com/en/download/COM-1480

.

Note:

The A3 connector allows user to attach an antenna for the integrated HSUPA module.

Warning:

Only insert or remove the SIM card when the computer/system is powered OFF!

HSUPA/UMTS section

• Tri-band UMTS/HSUPA:

o 850/1900/2100 MHz

o Downlink up to 7.2 Mbps

o Uplink up to 2.0 Mbps

• Power Class: 3 (+23 dBm)

EDGE section

• Quad-band EDGE/GPRS/GSM:

o 850/900/1800/1900 MHz

o Downlink up to 236 kbps

o Uplink up to 236 kbps

• GSM Power Class 4 for 850 / 900 bands

• GSM Power Class 1 for 1800 / 1900 bands

• GPRS / EDGE class B, multi-slot class 12 operation - supports all coding schemes (CS1-CS4,

MCS1.MCS9)

DC-1400 - User Manual

20

S8308MAN-S00

Main GPS features

The GPS module is available from the integrated COM-1480 board.

Refer to the COM-1480 User Manual for further information.

It is downloadable from http://www.eurotech.com/en/download/COM-1480

.

Note:

A2 connector allows an antenna to be attached for the integrated GPS module.

Warning:

Only insert or remove the SIM card when the computer/system is powered OFF!

• Fastrax iTrax03 12-channel low power GPS receiver

• L1 frequency, C/A code (SPS)

• Update rate: 1fix/s (user configurable up to 3 Hz)

• Accuracy:

o Position: 1.2 m (CEP95)

o Velocity: 0.1 m/s

o Time: 20 ns rms (static mode)

• Reacquisition: 100 ms (typical)

• Tracking Sensitivity: -156 dBm

• Support for active & passive external antennas

• Protocols: NMEA-0183 and proprietary iTalk™ binary protocol

Page is loading ...

Eurotech DuraCOR DC 1400 Owner's manual

Eurotech DuraCOR DC 1400 Owner's manual

Related papers

Other documents