Kichler Lighting 44336DBK User manual

Type
User manual

Kichler Lighting 44336DBK is a versatile lighting fixture designed to illuminate various indoor spaces. With its adjustable mounting strap, this fixture can be easily installed on ceilings, adapting to different outlet box positions. The fixture comes with multiple glass panels, allowing you to customize the light distribution and ambiance. The included inspection cable ensures safe and convenient maintenance. The fixture supports the use of recommended bulbs, providing ample illumination for your specific needs.

Kichler Lighting 44336DBK is a versatile lighting fixture designed to illuminate various indoor spaces. With its adjustable mounting strap, this fixture can be easily installed on ceilings, adapting to different outlet box positions. The fixture comes with multiple glass panels, allowing you to customize the light distribution and ambiance. The included inspection cable ensures safe and convenient maintenance. The fixture supports the use of recommended bulbs, providing ample illumination for your specific needs.

IS-44336-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
4) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (see illus.)
Neutral Wire
5) Aach the inspecon cable[L] to the mounng strap
or to the inside of the mounng box. Push xture to
ceiling, carefully passing mounng screws through holes
in canopy[E]. NOTE: Be certain wires do not get pinched
between canopy and ceiling.
6) Use knobs[J] and lockwashers[K] to secure canopy.
Tighten to secure.
7) Raise the side glass panel[I] up to the side of the main
body and secure into place using four (4) screws[G] and
four (4) sloed nuts[H]. Repeat for the other panels.
8) Insert recommended bulbs(s) (Not supplied).
9) Raise the boom glass panel[F] up to the boom of the
main body and secure into place using four(4) screws[G]
and four(4) sloed nuts[H].
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
[A] Mounting
Stap
[B] Mounting
Screws
[C] Outlet Box
[D] Strap
Mounting
Screws
[E] Canopy
[F] Bottom Glass
Panel
[G] Screws
[H] Slotted Nuts
[I] Side Glass
Panels
[J] Knobs
[K] Lockwashers
[L] Inspection
Cable
1) Find the appropriate threaded holes on mounng
strap[A]. Assemble mounng screws[B] into threaded
holes.
2) Aach mounng strap to outlet box[C] using the
strap mounng screws[D]. The mounng strap can be
adjusted to suit posion of xture.
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
C
A
D
B
E
J
K
G
F
H
I
L
Installaon Instrucons (connued)
IS-44336-CB
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)
INSTRUCTIONS:
For Assembling and Installing Fixtures in Canada
Pour Lassemblage et L’installaon Au Canada
1) Trouvez les trous taraudés appropriés sur sangle de
xaon[A]. Monter les vis de montage[B] dans les trous
letés.
2) Aachez la sangle de xaon à la boîte de sore[C] à
laide des vis de xaon de la sangle[D]. La sangle de
xaon peut être ajustée en foncon de la posion de
montage.
3) Connecter les ls. Se reporter au tableau ci-dessous pour
faire les connexions.
Connecter le l noir ou
rouge de la boite
Connecter le l blanc de
la boîte
A Noir A Blanc
*Au cordon parallèle (rond
et lisse)
*Au cordon parallèle (à
angles droits el strié)
Au transparent, doré,
marron, ou noir sans l
disncf
Au transparent, doré,
marron, ou noir avec un l
disncf
Fil isolé (sauf l vert) avec
conducteur en cuivre
Fil isolé (sauf l vert) avec
conducteur en argent
*Remarque: Avec emploi d’un
l paralléle (SPT 1 et SPT 2). Le
l neutre est á angles droits ou
strié et lautre l doit étre rond
ou lisse (Voir le schéma).
Fil Neutre
4) Fixez le câble d'inspecon[L] à la plaque de montage ou
à l'intérieur du boîer de montage. Poussez xaon au
plafond, en passant soigneusement les vis de montage à
travers des trous dans la canopée[E]. REMARQUE : Vous
assurer que tous les ls sont dans le canopée et ne se
retrouvent pas pincés entre le canopée et le plafond.
5) Ulisez les boutons[J] et les systèmes de verrouillage[K]
pour sécuriser le canopée. Serrez pour sécuriser.
6) Soulevez le panneau de verre latéral[I] sur le côté du
corps principal et xez-le en place à laide de quatre (4)
vis[G] et de quatre (4) écrous à encoches[H]. Répétez
pour les autres panneaux.
7) Insérez les ampoules recommandées (non fournies).
8) Soulevez le panneau de verre inférieur[F] sur le fond du
corps principal et xez-le en place à laide de quatre (4)
vis[G] et de quatre (4) écrous à encoches[H].
Diagramme d’appareils
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installaon.
ATTENTION:
Ce luminaire doit être installé conformément aux codes
d’électricité naonaux (NEC) et sasfaire toutes les
spécicaons des codes locaux. Si vous ne connaissez pas
les exigences de ces codes, il est recommandé de coner
l’installaon à un électricien ceré.
Liste des Pièces
Précauons
[A] Sangle de
Fixation
[B] Vis de
Montage
[C] Boîte de
Sore
[D] Vis de
Fixaon de la
Sangle
[E] Canopée
[F] Panneau
de Verre
Inférieur
[G] Vis
[H] Écrous à
Encoches
[I] Panneau de
Verre Latéral
[J] Boutons
[K] Systèmes de
Verrouillage
[L] Câble
d'inspection
Instrucons d’installaon
C
A
D
B
E
J
K
G
F
H
I
L
  • Page 1 1
  • Page 2 2

Kichler Lighting 44336DBK User manual

Type
User manual

Kichler Lighting 44336DBK is a versatile lighting fixture designed to illuminate various indoor spaces. With its adjustable mounting strap, this fixture can be easily installed on ceilings, adapting to different outlet box positions. The fixture comes with multiple glass panels, allowing you to customize the light distribution and ambiance. The included inspection cable ensures safe and convenient maintenance. The fixture supports the use of recommended bulbs, providing ample illumination for your specific needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages