ACV AM3-2 Alarm box - Module d'alarme - Alarm module
This device allows remote indication of various boiler statuses and can be used to control external devices based on these statuses. The statuses that can be indicated are:
The module has three relays that are controlled by the boiler's MCBA. The contacts of the relays are potential-free and allow a maximum current draw of 1 A - 250 V. This means that the module can be used to control a wide range of external devices, such as pumps, lights, or alarms.
To install the module, simply attach it to the electrical panel inside the boiler jacket using two screws. Then, connect the module to the MCBA using the flat cable that is included. Finally, connect the relays to the desired external devices using flexible wires.
ACV AM3-2 Alarm box - Module d'alarme - Alarm module
This device allows remote indication of various boiler statuses and can be used to control external devices based on these statuses. The statuses that can be indicated are:
The module has three relays that are controlled by the boiler's MCBA. The contacts of the relays are potential-free and allow a maximum current draw of 1 A - 250 V. This means that the module can be used to control a wide range of external devices, such as pumps, lights, or alarms.
To install the module, simply attach it to the electrical panel inside the boiler jacket using two screws. Then, connect the module to the MCBA using the flat cable that is included. Finally, connect the relays to the desired external devices using flexible wires.
ACV AM3-2 Alarm box - Module d'alarme - Alarm module
This device allows remote indication of various boiler statuses and can be used to control external devices based on these statuses. The statuses that can be indicated are:
The module has three relays that are controlled by the boiler's MCBA. The contacts of the relays are potential-free and allow a maximum current draw of 1 A - 250 V. This means that the module can be used to control a wide range of external devices, such as pumps, lights, or alarms.
To install the module, simply attach it to the electrical panel inside the boiler jacket using two screws. Then, connect the module to the MCBA using the flat cable that is included. Finally, connect the relays to the desired external devices using flexible wires.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI