DECORATIVE PANELS
INSTALL INSTRUCTIONS
Indentation identifies the recommended
fastener location.
Pre-drill using a 1/8” bit.
Place the screw into the hole
of the cap, fasten, then cap.
2’x 4’
Includes six (6) color-matched
screw caps. Screws NOT included.
- Easy to install
- Each panel will require (4) #8 1 ½” long stainless steel screws and screw covers.
- Allow 1/16” between sheets for expansion and contraction
- All four corners of the panel must be fastened to the mounti g suace.
- Product expands and contracts with temperature
- Mount loosely. Do not nail
- Easy to cut using a fine tooth saw
- Made from low-maintenance, durable, high-quality polypropyle e plastic.
- Fully paintable - check with your local paint store for inst uctions.
- C & H channels are available in matching colors. Sold Separa ely.
320-243-7318
gridaxcentslattice.com
Grid A cents
TM
0819ST
-
1
GRID AXCENTS 62423 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI