Aston SEN979-TR-MB-48-10-L Installation guide

Type
Installation guide

Aston SEN979-TR-MB-48-10-L is a shower enclosure with tray that is designed to be used with tiled walls. It features tempered safety glass and high-quality hardware. The shower door is not reversible and can only be installed with the door opening from right to left. The shower tray needs to sit on a flat level base for proper support and must be installed so that the tile lip is against the wall studs. The shower door is designed to be installed using the connection point to the studs or to pre-installed 2x6 wood reinforcements behind the wall.

Aston SEN979-TR-MB-48-10-L is a shower enclosure with tray that is designed to be used with tiled walls. It features tempered safety glass and high-quality hardware. The shower door is not reversible and can only be installed with the door opening from right to left. The shower tray needs to sit on a flat level base for proper support and must be installed so that the tile lip is against the wall studs. The shower door is designed to be installed using the connection point to the studs or to pre-installed 2x6 wood reinforcements behind the wall.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

Aston SEN979-TR-MB-48-10-L Installation guide

Type
Installation guide

Aston SEN979-TR-MB-48-10-L is a shower enclosure with tray that is designed to be used with tiled walls. It features tempered safety glass and high-quality hardware. The shower door is not reversible and can only be installed with the door opening from right to left. The shower tray needs to sit on a flat level base for proper support and must be installed so that the tile lip is against the wall studs. The shower door is designed to be installed using the connection point to the studs or to pre-installed 2x6 wood reinforcements behind the wall.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI