Page is loading ...
FLAT ROOF GUARDRAIL #12060
FOR HORIZONTAL SURFACES
•
Capable of multiple applications including flat roofs, metal
roofs, parapets, skylights, stairwells, and rake edges on
steep pitched roofs
•
The U.S.A. Plate (Universal Shoe Adaptor part #12061)
connects to virtually any mounting surface
•
Plate can be screwed, bolted or welded and if necessary, left
behind
•
The Connector (part #12022) features a key lock button
•
System comes complete with all 3 parts (individual compo-
nents available as well)
•
Maximum spacing 8’ apart (used with construction grade
lumber)
•
Complies with OSHA regulations
•
Powder coated safety yellow
•
Made in America
Model # Description
Lbs. Dimensions
12060 Complete System 11 43”x5”x1”
12022 Shoe 4 6”x6”x2”
12061 U S A Plate 3 8”x10”
12055 Replacement Post 4 42”x5”x1”
12060 Universal Guardrail
12060 FLAT ROOF GUARDRAIL SYSTEM
In 2009 Acro introduced the Universal Guard Rail system model
12060 which targets low pitch roofs, including metal roofs.
Unique to the system is the low profile attaching plate which is
attached either by nails, bolts or screws. Even welding is an op-
tion. A connecting shoe and post are added to complete the sys-
tem. Pre-cut 2 x 4 studs are used for cross rails. During removal,
the attachment plate may be left on the building greatly reducing
take down time. The low ½" profile is easily covered below the
roof surface. Other applications when the safety rail is needed on
top of an existing roof (skylights or stairwell); screws are easily
removed during take down.
Please visit our website for full install instructions
PHONE (TOLL FREE): 800-267-3807
FAX: 414-445-8792
WEB: WWW.ACROBUILDINGSYSTEMS.COM
EMAIL: INFO@ACROBUILDINGSYSTEMS.COM
/
