INSTEON Dimmer Switch (2-Wire) Quick start guide
- Type
- Quick start guide
Turn off power at the service
panel and remove the existing
wall switch.
1
Getting Started with
Insteon Dimmer Switch
(2-Wire)
Unfold all of the wires from
within the junction box.
Separate the black wires and
cap them with wire nuts.
Installation to be performed only
by a qualified person.
2
Get Started
insteon.com/get-started-2474d
Turn on power and use a
voltage detector to identify the
live wire; this is your line wire.
3
CFL
LED
Turn off power and connect
the corresponding wires from
the junction box with the Insteon
Wall Switch and cap them with
wire nuts.
4
Install the Insteon Wall Switch,
attach the wall plate and turn
on power.
5
For more documentation, visit:
insteon.com/get-started-2474d
Rev 6.24.16
Follow the instructions in
the Insteon app to add
Dimmer Switch.
6
When prompted, press
and hold Dimmer
Switch’s set button
until you hear a
double-beep.
7
Only connect incandescent bulbs to Dimmer Switch (2-Wire).
Incandescent
& Halogen
-
1
-
2
INSTEON Dimmer Switch (2-Wire) Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
INSTEON SwitchLinc Dimmer (2005-2010) Quick start guide
-
-
-
-
INSTEON Ceiling Fan Controller Quick start guide
-
-
-
-
-
