Dura-Trel 11301 Installation guide

Type
Installation guide
Model#
11301
Assembly Instructions
Part # Description Box#
1 4" sq. x 93" Post 1
2 1½ x 5½ x 106" Bottom Support Rail 2
3 1½ x 5½ x 106" Upper Support Rail 2
4 ⅞ x 3 x 106" Top Cross Rail 2
5
1½" Upper Support Bracket 3
6 4" sq. New England Post Cap 3
7 1½ x 5½" Pergola End Cap 3
8
30" Steel Ground Anchor (U-shaped)
1
9 Hardware Bag
(includes:)
3
⅞ x 3" End Cap
2" Painted Screw
¾" Painted Screw
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY. #8 - 1" Painted Self Tapping Screw
IMPORTANT: Check boxes for Contents Listed
PVC Glue Can
Check inside of parts as some parts are packaged
inside of others
In the event of missing, damaged or defective parts
please call our customer service dept. at 1-877-258-6020
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
Battery or Electric Drill with #2 phillips bit
Tape Measure
Hammer or Rubber Mallet (recommended)
Shovel or Post Hole Digger (recommended)
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
1
Qty
4
Queensbrook Pergola
8
4
16
9
8
2
6
18
General Information
66
32
4
1
www.dura-trel.com
sales@dura-trel.com
Tools Required
1-877-258-6020
1
  • Page 1 1

Dura-Trel 11301 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI