Panasonic PV-M2058 Owner's manual

Brand: Panasonic

Model: PV-M2058

Category: Cassette players

Type: Owner's manual

Thank you for choosing

Panasonic

Omnivieton _

ARY:

_ceived

Combination VCR

-MODELS PV-M2048/PV-M2058

Eosy Toping.

Operating

Instructions

Pleasereadthese instructionscarefullybeforeattemptingtoconnect,

operateoradjustthisproduct.Pleasesavethismanual.

SpanishQuickUseGuideisincluded.

Gufapara rdpidaconsultaen espaSolestdincludo.

VQ'rS3411 (A)

Things You Should Know

Congratulations

Date of Purchase

onyourpurchaseofoneofthemostsophisticatedandreliableproducts Dealer Purchased From

onthemarkettoday.Usedproperly,itwillbringyouandyourfamily Dealer Address

yearsofenjoyment.Pleasefill intheinformationatright.Theserial Dealer Phone No.

numberisonthetaglocatedonthebackofyourCombinationVCR.

Model No.

Safety Precautions SerialNo.

Warning:To prevent fire or shock hazard, do not exposethis equipment to rainor moisture.

Thisvideorecorder,equippedwiththe HQ ( HighQuality)System,iscompatiblewithexistingVHS equipment.

Only usethosetapeswiththe _ mark. Itisrecommendedthatonlycassettetapesthathave beentestedand

inspectedfor usein2, 4, 6, and8 hourVCR machinesbeused.

Thistelevisionreceiverprovidesdisplayoftelevisionclosedcaptioninginaccordancewith§15.119ofthe FCCrules.

Thissymbolwams the user thatuninsulatedvoltagewithinthe unit

may have sufficientmagnitudeto cause electricshock.Therefore, itis

dangerousto make any kindof contactwith any insidepart ofthis unit.

Thissymbol alertsthe userthat importantliterature concemingthe

operationand maintenance ofthis unithas been included.

Therefore, itshouldbe read carefullyin order toavoid any problems.

Table of Contents

Things You Should Know ................................................................ :.-....'_......;.-.=.............................. 2

Important Safeguards and Precautions ............................................... :....:.:..:...::;.. ........................ 3

Unpacking Your Combination VCR • Product Features ................................................... ............... 4

[tt"_ll i, =,.l.-t_.t i _,i

Antenna or Cable Connections (Outdoor Antenna, Cable Box, Scrambled/Unscrambled Channels) ................. 5

Location of Controls (Remote Control, Combination VCR) .................................................................... 6, 7

One Time Setup (On-Scraen Language, Channel Memory, Auto Clock Set) ............................................... 8, 9

On-Screen Displays (OSD) (Function, Channel, Menu, VCR Status/Clock, Warning, Instruction) .................... 10

i ;_. k'l _ litj[lJl iI;,) f:.l | (0) I I

TV Operation (MainOperation,Usingthe100key,RapidTune,AudioMute,Phones,SELF-DEMOMode,NITE/GAMEmode)....... 11

Picture Adjustment (Color,Tint,Brightness,Picture,Sharpness,Reset) ..................................................... 12

TV Timer Features (AlarmTimer,Sleep Timer).................................................................................... 13

Closed Capti6n System (MainOperation, CaptionOnMute) .................................................................. 14

FM Radio ...................................................................................................................................... 15

Playback a Tape (MainOperation,Special Effects,Quality Picture Features)............................................... 16

Record On a Tape (MainOperation,OneTouchRecord,InputSelect)....................................................... 17

_¢RI'RI_T_

Timer Recording (Main Operation,Cancel, Clear or ReplaceProgramContents)..................................... 18, 19

Copying Your Tapes (Connection,MainOperation).................... ................... :............. _....:................... 20

Special VCR Features .(ChannelCaptipn,TimeStamp,BlueBackON/OFF,VCRLock,WarningBeeper)....... 21, 22, 23

Tape Operation (IndexSearch,RepeatPlay,One MinuteSkip,ZeroSearch,AutoFunctions)............... 24, 25, 26

MTS Broadcast/TV Stereo System (Stereo/SAP/MonoBroadcast,SelectAudioMode)<For Model PV-M2058 only>...... 27

•"VCR Plus+ Setup ................................................................................................................... 28, 29

VCR Plus+ Programming.............................................................................................................. 30

Cable BoxUniversalRemote Control Operation(Main0peraUon,DSSandCableBoxCodeList)<ForModelPV-M2058only>...31

[I]ih (t,) dl i'_ (0) i I I I_.1| [I) I I

•Unit and Cassette Information .......................................................... _ ........................................ 32

Before Requesting Service (Self-checkItems) .................................................................................. 33

Service Center List ....................................................................................................................... 34

Warranty ....................................................................................................................................... 35

Spanish Quick Use Guide/Guia para rdpida consulta ............................................................ 36~39

Important Safeguards and Precautions

I FOR YOUR SAFETY, READ AND RETAIN ALL

SAFETY AND OPERATING INSTRUCTIONS.

HEED ALL WARNINGS IN THE MANUAL AND

ON THE UNIT

! INSTALLATION I

1 POWER SOURCE CAUTION

Operate only from a power source indicated on the

unit or in this manual.

If necessary, have your Electric Utility Service

Company or Video Products Dealer verify the power

source in your home.

2 POLARIZED OR GROUNDING PLUG

As a safety feature, this Video product comes with

either a poladzed power cord plug (one blade is

wider than the other), or a three-wire grounding type

plug.

pOLARIZED PLUG CAUTION:

This plug will only fitinto an outlet one way. If you

cannot fully insert the plug, try reversing it. If it still will

not fit, have an electrician install the proper wall outlet.

Do not defeat the safety feature by tampedng with the

plug.

GROUNDING PLUG CAUTION:

This plug will only fit into a three-hole grounding outleL

If necessen/, have an electrician install the proper

outlet. Do not defeat the safety feature by tampering

with the plug.

3 POWER CORD

Make sure power cords are muted so that they are

not likely to have anything rest on them, roll over

them, or be in the way ofwalking traffic.

If an extension cord is used, make sure it also has

either a polarized or grounded plug and that the

cords can be securely connected.

Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should be

replaced by a qualified service technician.

Overloaded outlets and extension cords are fire

hazards and should be avoided.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If they are blocked, heat

build-up inside the unit can cause failures that may

result in a fire hazard or heat damage to cassettes.

For protection follow these rules:

a. Never cover ventilation slots or the unit while in

use, or operate the unit when placed on a bed,

sofa, rug, or other soft surface.

b. Avoid built-in installation, such as a book case or

rack, unless proper ventilation is provided.

5 AVOID'EXTREMELY HOT LOCATIONS OR

SUDDEN TEMPERATURE CHANGES

Do r_otplace the unit over or near any kind ofheater

or regulator, in direct sunlight, inside a closed

vehicle, etc.. Do not move the unit suddenly between

areas ofextreme temperature variation. If the unit is

suddenly moved from a cold place to a warm place,

moisture may condense in the unit and on the tape.

6 TO AVOID PERSONAL INJURY _}

• Do not place unsecured equipment on a sloping

surface.

• ,Do not place this unit on any support that is not

firm, level and adequately strong. The unit could fall

causing sadous injury to child or

adult and damage to the unit.

• An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and

unpven surfaces may cause the

appliance and carl combination to

ovedum.

• Carefully follow all operating

instructions and use the manufacturer's

recommended accassories when operating this unit

or connecting it to any other equipment.

[ OUTDOOR ANTENNA INSTALLATION I

1 SAFE ANTENNA AND CABLE CONNECTION

Ifan outside antenna or cable_=..=_o,wr=,.,)__

system is connected to the

equipment, be sure the

antenna or cable system is

grounded so as to provide

some protection against

built up static charges and

voltage surges. Section 810 =Moum_co,,=_ro_

(NIIC_ lnO-=1}

of the National Electrical =_=,m=.,_

Code, ANSI/NFPA 70 (in

Canada, part 1 of the ,o,,,==R_ce=_m_e,,m=

Canadian Electrical Coda) _ ._=._rn_co= _=_n,r=.p_rr_

provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna discharge unit,

connection to grounding electrodes and requirements for the grounding

electrode.

2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES

OR CIRCUITS

An outside antenna system should be located well away from power lines,

electric light or power circuits and where it will never come into contact with

these power sources if it should happen to fall. When installing an outside

antenna, extreme care should be taken to avoid touching power lines,

circuits or other power sources as this could be fatal. Because of the

hazards involved, antenna installation should be left to a professional.

I USINGTHEVIDEOUNIT I

If the unit has been in storage or moved to a new location, refer first to the

INSTALLATION section of these safeguards.

1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR MOISTURE

OF ANY KIND.

2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug the unit and have it inspected by a qualified

service technician before use.

3 DURING AN ELECTRICAL STORM

Dudng a lightning storm, whether indoors or outdoors, or before leaving the

unitunused for extended pedods of time, disconnect all equipment from the

power source as well as the antenna and cable system.

4 WHEN THE UNIT IS PLUGGED IN

• Never expose the unit to rain or water. DO NOT OPERATE if liquid has

been spilled into the unit. Immediately unplug the unit, and have it

inspected by a service technician. Fire and shock hazards can result from

electrical shorts caused by liquid contact inside.

• Never drop or press any object through openings in the unit. Some internal

parts carry hazardous voltages and contact can cause electdc shock or fire

hazard.

• Avoid placing the unitdirectly above or below your TV sat as this may

cause eisctdcal interference. Keep all magnets away from electronic

equipmenL

5 USING ACCESSORIES

Usa only accessodes recommended by the manufacturer to avoid risk of fire,

shock, or other hazards.

6 CLEANING THE UNIT

Unplug the unit.Then, use a clean, dry, chemically untreated cloth to gently

remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air

that could over-spray, or seep into the unit and cause,electrical shock. Any

substance such as wax_ adhesive tape, etc. may mar the _abinet surface.

Exposure to greasy, humid, or dusty areas may adversely affect internal pads.

I SERVICE I

1 DO NOT SERVICE THIS PRODUCT YOURSELF

If, after carefully following the detailed operating instructions, this Video

product does not operate properly, do not attempt to open or remove covers,

or make any adjustments not dascdbed in the manual. Unplug the unit and

contact a qualified service technician. :..

2 IF REPLACEMENT PARTS ARE REQUIRED

Make sure the sen/ice technician uses only parts specified by the manufacturer,

or those having the same safety characteristics as the original pads. The usa of

unauthorized substitutesmay result in fire, alectdc shock, or other hazards.

3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK

After any service or repairs to the unit, request the sancta technician to

conduct a thorough safety check as described in the manufacture's service

literature to insure that the video unit is in safe operating condition.

UnpackingYourCombinationVCRoProductFeatures

Unpacking Your

Combination VCR

The accessoriesshownbelow are providedto

help you use or set up your Combination VCR.

Accessories

tw i ,L\

INl-I I+IH

O®®i

QQ®t

Q®®

Model PV-M2058 remote

is shown here.

Remote Control

VSQS1563 (PV-M2048)

VSQS1564 (PV-M2058)

2 "AA" Batteries

To order accessories, -

call toll free 1-800-211-PANA(7262).

Load the batteries

Press in and up on

the latch with your

thumb nail and lift

off the lid.

Installtwo batteries

as indicatedinside

the Battery

Compartment.

Fit the lid's hinge

pieceintothe indent

onthecase,and

snapthe lidinto

place.

Battery replacement caution

• Do notmix old and new batteries.

• Do not mix alkaline with manganese batteries.

Product Features

Alarm Timer ..=............................................................................................................................... 13

All Channel Auto Set/181 -CH TV/CABLE Tuner ............................................................................. 8

Auto Clock Set ............................................................................................................................ 8, 9

Auto Daylight Saving Time ............................................................................................................ 32

Auto Operation Functions (Auto Shut Off, Auto Playback, Rewind, Tape Eject, Power Off) ............................. 26

Auto Repeat Function ................................................................................................................... 26

Cable Box Universal Remote Control Feature <For Model PV-M2058 only> ............................... 31

Closed Caption System ................................................................................................................. 14

Easy-to-Read English/Spanish/French On-Screen Displays .......................................... 8, 9, 18, 19

FM Radio .................................................................................... ,............ ................... ;.................. 15

Front-mounted AN In Terminals ............................................................................................. 20, 28

MTS Broadcast System .<For Mode! PV-M2058 only> ................................................................. 27

NITE/GAME Mode ........................................................................................................................ 11

One Minute Skip ............................................................................................................................ 26

One Month, 8 Program Auto Timer Recording ........................................................................ 18, 19

One Touch Recording (OTR) ........................................................................................................ 17

PanaBlack TM Picture Tube ...................................................... ...................................................... 16

Quick Play Mechanism .......................................................................................................... ......... 33

Rapid Tune .................................................................................................................................... 11

Special Effects Playback .............................................................................................................. 16

Special VCR Features (ChannelCaption,Time Stamp, BlueBackON/OFF Feature,VCR Lock, Waming Beeper)...... 21~23

VCR Plus+ Recording ................................................................................ ,.................................. 30

VHS Index Search System (Direct Access Search, Program Index Search, Index Scan Search) ............... 24, 25

Zero Search .................................................................................................................................. 26

Antenna or Cable Connections

Unhook the antenna from your previous TV

or VCR and connect it to the back of the

Combination VCR as shown in the diagram.

If your antenna system has separate UHF

and VHF lead-ins, you need a UHFNHF

Band Mixer (not supplied).

(A) Without a Converter/Descrambler Box

With this connection, you can use your

Combination VCR remote control to select

channels for viewing and select

unscrambled channels for timer recording.

Scrambled channels may not be viewed or

recorded with this connection.

(B) With a Converter/Descrambler Box

With this connection, you may record and

view any channel including scrambled

channels. Please note, however that

channel selection must be made atthe

cable company converter box. Timer

recording is limited to one channel at a time,

and you can only view the channel you are

recording.

With this connection, you can record and

view any channel including scrambled

channels; channel selection must be made

at the DSS Receiver. Also, you may

program one channel for unattended

recording.

NOTE:

The DSS receivermustbeturnedofftoview

programsfrom a cableboxor antenna.See the

DSSmanualfor details.

*DSS ®is registered trademark of DIRECTV, INC.,

a unit of GM Hughed Electronics.

-. . I_

To Watch and Record Scrambled/

Unscrambled Channels

Set the Combination VCR to the output

channel of the cable converter box (e.g. CH3).

Now, select channels to be viewed or

recorded at the cable converter box.

FCC WARNING: Any unauthorized changes or

modiIications to this equipment would void the

user's authority to operate.

(Rat)Twin Lead

300 Ohm Cable UHFNHF Band

oh Mixer(notsupplied)

(Round)

or "_ .,,.

301t-75ohm _

Transformer['_[_('_._ _ -

from (not sup_

Antenna

(Flat)TwinLead CombinationVCR

300OhmCable

(A) Back of Combination VCR

re--

(B)

Cable TV

., ConverterBox

(c)

IN FROM CABLE or Antenna

.__R ._rlN FROM Satellite Dish

js'_

Note to CABLE System Installer

This reminder isprovided to call the CABLE (Cable

TV) System Installers attention to Article820-40 of

the NEC that provides.guidelines for proper

groundingand, in particular,specifies that the cable

ground shall be connected to the grounding system

of the building,as closeto the pointof cable entry as

practical.

Location of Controls

[|;liilol _][Ofo] 11{'_ l ;]lJ] | (o] iI_

NITE/GAME

See page 11.

I"VNCR <PV-M2058 only>

See page 31.

POWER

See pages 8, 11.

MUTE

See pages 11, 14.

CHANNEL UP/DOWN

SELECT UP/DOWN

See pages 8-15, 17-19, 21-26, 28-30.

ACTION

See pages 8-10, 12, 14, 17,

21-23, 26, 28, 29.

NUMBERED KEY

See pages 9, 11, 15, 17, 24, 30, 31.

DISPLAY

See pages 10, 13, 15, 26, 27.

INDEX

See pages 24, 25.

REWIND/SEARCH

See pages 16, 24, 25.

PAUSE

See pages 16, 17.

PLAY_

See pages 16, 25.

ADD/DELETE

See pages 8, 9,13;15,19,21,29.

AUDIO <PV-M2058 one>

See pages 15, 27.

QQQ

pLAy FFI8

Model PV-M2058 remote

is shown here.

DSS CABLE <PV-M2058 only>

See page 31.

RAPID TUNE

See page 11.

VOLUME UP/DOWN

SET/BACKSPACE

See pages 8-14, 17-19, 21-26, 28-30.

PROGRAM

See pages 18, 19, 30.

TRACKING UP/DOWN

See page 16.

SLEEP

See page 13.

FMrFV ENTER

See pages 15, 31.

ON-YIMER

See page13.

FAST FORWARD/SEARCH

See pages 16, 24, 25.

STOP

See pages 16, 17, 19, 25.

RECORD/TIME

See page 17.

SPEED

See page 17.

ZEROI1 MINUTE SKIP

See page 26.

SLOW

See page 16.

COUNTER RESET

See page 26.

1 ;|_1 |TJ [_',viol [ I[_,] i|! _ I iP-.ll [ol ilT[_ :!

AC Power Plug

When plugged into an

AC outlet, the

Combination VCR

consumes 5 W of electric

power in OFF condition.

,,]--I

_-_VHF/UHF Antenna

Input Terminal

In from your

Antenna or Cable.

See page 5.

Model PV-M2058 unit is shown here.

Cassette

Compartment

See pages 16, 17.

CHANNEL UP/DOWN

TRACKING UP/DOWN

See pages 8, 11, 16, 17.

VOLUME UP/DOWN

See pages 8, 11.

See pages 20, 28.

POWER

See pages 8, 11.

FM/TV

See page 15.

NITE/GAME

See page 11.

Built-InSpeaker

(X 1) <PV-M2048>

(X 2) <PV-M2058>

Remote

Sensor

See page 11.

STOP/EJECT REWIND/SEARCH PLAY/REPEAT FAST FORWARD/ RECORD/

See pages See pages See pages SEARCH TIME

16, 17, 19, 25. 16, 24, 25. 11, 16, 25, 26. See pages 16, 24, 25. See pages 17, 23.

Model PV-M2058 unit is shown here.

ON TIMER Indicator

Lights when the On

Timer is set.

See page 13.

REPEAT Indicator

Lights when "REPEAT PLAY:

ON" is selected and playback

is in progress.

See page 26.

PROGRAM TIMER

indicator

Lights when the

Combination VCR is set for

Timer Recording. It flashes

when a Timer Recording

has been set with no tape

inserted, the clock is not set,

or the tape is in motion.

See pages 17-19, 30:

RECORD Indicator--

Lights during recording. In

Rec Pause or OTR Pause

mode, the indicator flashes.

See page 17.

One Time Setup

*Important: If the remote control POWER,

CH AV, ACTION, PROG,

INDEX, ON-TIMER, R-TUNE,

FM[I'V and ADD/DLT button

does not work when pressed,

press the TVNCR button on the

remote and try the button again.

Whenthe CombinationVCR isturnedonfor

the firsttime,itautomatically entersthe

setupmode.Setupincludesthe following:

• Choosethe languagefor on-screenmenus

and messages.

• Tell theCombinationVCR howyour

equipmentishookedup(page 5) sothe

CombinationVCR cancorrectlyplace

channelsintomemory.

• GettheCombinationVCR readyfor clockset.

[_!_Check list before you begin.

[] YourCombinationVCR isconnectedtoan

Antenna,orCablesystem(seepage5).

Model PV-M2058 unit is shown here.

1 2 2.3-4

ACTION

SELECTI

SET

(Av4_)

keys

DELETE

Model PV-M2058 remote is shown here.

Using the bV '_ _ ke_s

Whenever a menu or program

screen is displayed, CHANNEL

UP/DOWN and VOLUME UP/DOWN on

the remote control function as •Vd•

on_/. For VOLUME UP/DOWN functions,

use the buttons on the Combination VCR.

ToSetLanguage,ChannelsandClock

1 Press POWER* to turn the Combination VCR on.

2 Press CH AV, or VOL_ for on

screen displays in English,

Spanish or French.

• If you choose the wrong language,

please see the =Reset all Combination

VCR Memory Functions" section on

page 32.

• If you use a cable box, the cable box must be left on for auto

channel set.

SELECTLANGUAGE

PUSH CH • :English

OPRIMIR CH • :Espa_ol

APP. VOL + :Fran;ais

Important: If you use a cable box, turn it on and select

the PBS station in your time zone.

3 Press CH • to start Channel CHANNEL/CLOCKAUTOSET

Auto Set and Clock Auto Set. coNNEct_._ CABLE

These on-screen displays will

appear in sequence.

• CH AUTO SET PROCEEDING

• CH AUTO SET COMPLETED

• AUTO CLOCK SET PROCEEDING

AUTOCLOCKSET

(NIMR._EO

END : PUSH CH UP KEY

AND IF YOU USE A CABLE

BOX, TUNE IT TO YOUR

LOCAL PBS CH THEN...

PLEASE PUSH CH UP KEY

AUTOCLOCK SET I

IS INCOMPLETE

PUSH ACTION TO SET CLO<3_

AI4_ If the displayedtime is correct, press CH • to

exit.

•ThisconcludesonetimeCombinationVCRsetup.

• See importantnoteatthe bottomofthispage.

If the displayed time and DST. are not correct...

If youhappen to live close totwo time zones, the Combination VCR may

have recognized the PBS channel (setting channel) in the wrong time

zone. Please do the followingto correct the situation.

a. Make a note of the SETTING: CH number shown on-screen and

press CH • to exit.

b. Delete the setting channel from the Combination VCR channel memory.

(See the Add or Delete a Channel section on the next page.)

c. Press ACTION to display the MAIN MENU.

d. Press •v<• to select._CLOCK," and then gres.,s,ACTION to display

the SET CLOCK screen.

• If you use a cable box and have multiple PBS stations, tune the

cable box to a different PBS station and try auto clock set again

using the menu.

e. Press •v to select "AUTO CLOCK SET," and then press • to set

and CH • to start Auto Clock set.

o cL6C_K_ _:

_n vcR_isturned

youmust=_ connecttheRFccax_ ;_.

set,andchannelautosetfeatures._ i

_lt foranyreason thetimels changedm_inually,automatictime

• correction will not occur.

lf AUTO CLOCK SET IS INCOMPLETE

appears, please set the clock manually.

a. Press ACTION to display the SET

CLOCK screen.

b. Press &v to select and • to

enter the month, date, year, time

and DST. (Daylight Saving Time).

To Make Corrections,

repeatedly press 4• to move the

cursor to the incorrect entry and

make the correction.

c. Press ACTION twice to start the

clock and exit the MAIN MENU.

s;o.

• "DST:ON" automatically

adjusts for daylight

saving time. (See page 32.)

ACTION

SET

(Av<=,)

keys

To Change the OSD Language

1 PressACTIONto displaytheMAIN MENU.

2 Press AV<• to selectthe languageselection

icon.

3 PressAcTIoN repeatedlytochangethelanguage

as shown.

MAIN IdeNU

S_JECT:& v 41p KEY

SET :ACTION KEY

L_.

LI <Spanish>

MENUPRnNCnPXL I

I_]d_ I <French>

-=°E_J

I, REGLIER :ACTION

Press AV 4• to select "EXIT," and then press

ACTION to exit the MAIN MENU.

To Replace Channels in Memory

In case,youhave cableinstalled,etc.

1 Press ACTION to display the MAIN MENU.

Press AV<• to select"CH," |

and then press ACTION to

display the SET UP CHANNEL

screen.

Press AV repeatedly to select

"ANTENNA," and then press

• to select your antenna

system ("-rv" or "CABLE"):.

Press AV to select "AUTO

,,SET," and then press

• to start.

• Toexitthe SETUP CHANNEL

screen, pressACTION twice.

MAIN M6NU

SELECT:A • < _" KEY

SET :ACTION KEY

.... SET UP CHANNEL .... |

VCR Plus+ CH SET UP

SELECT:& • KEY

SET :_. KEY

ENO :ACTION KEY

ADD/m

DELETE

Model PV-M2058 remote is shown here.

To Set or Reset the Clock

Incasetheclockiswrong,orapowerfailureoccurred.

1 Press ACTION to

..... SET CLOCK ......

display the MAIN

MENU. AUTOCLOCKSET

2 Press AV<• to

select =CLOCK." s_uEcr:. • KEY

sE'r :lp KEY

Then, press s_o :ACT'IONKEY

ACTION to display

the SET CLOCK r _ SETCLOC_

screen.

3 "/1\ DST:ON

Press AV to select |.................. :

"MANUAL," and then Im-_m'ag_

• to display the I sa.Ecr:.• KEY

SET CLOCK screen. [ _ I_K,_oNKEY

4 Please do steps b

and c at the top of this page.

To Add or Delete a Channel

1SeecachaneIiN08D

using the 1

NUMBERED keys CHANNEL 08 DELETED

to add or CH AV

to delete.

2 Press ADD/DLT

to add or delete

the channel.

• To select a channel once it's deleted, use the

NUMBERED keys.

On-Screen Displays (OSD)

*Important: Ifthe remote controlPOWER,CH AV,

ACTION, PROG, INDEX, ON-TIMER,

R-TUNE, FM/TV andADD/DLTbutton

doesnotworkwhenpressed,pressthe

TVNCR buttonon theremoteandtry

thebuttonagain.

Channel & Function Display

Wheneverthechannelis

changed,the channel

numberwillappearfor a few

secondson-screen.

(Somestationnamesmay

alsoappearifChannel

Captionisset.See page21.)

Whena function buttonis

pressed(PLAY,FF,etc.), theCombinationVCR

modewillbedisplayed.

• Whena recordingisstarted,bothREC and

thechannelnumberwillappeartogether.

ABC

Menu Screen

1 Press ACTION* to

display the MAIN

MENU.

2PressA_'<I_ and

ACTION to make your

selection (see page 8).

• To getthemostfromeachfeature,pleaseread

theOperationManual beforeattemptingany

operation.

VCR Status & Clock Display

Press DISPLAY to display and remove the

overlay shown below.

Warning and Instruction Displays

Thesedisplayswillalertyouofa missedoperationor

provide furtherinstructions.

If no active channels are

found for CHANNEL

MEMORY...

(see page 5.)

l NO CH FOUND

PLEASE CHECK ANTENNA

CABLE CONNECTION THEN

PUSH CH UP KEY AGAIN

Ifyouattempttoset or

reviewa TimerRecordingor

settheOn-Timer andthe

Clockisnotset...

(see pages8, 9.)

PLEASE SET CLOCK

BEFORE PROGRAMMING

IfyoupressREC on the

remotecontrolorthe

CombinationVCR, and a

cassetteis insertedwithno

recordtab...

(see page 17.)

CHECK CASSETTE

RB3ORD TAB

Ifyou pressSTOP

duringa Timer

Recording...

(seepage 19.)

TO CANCEL TIBER REC

HOLD D(TtlN STOP KEY

FOR APPROX 3 SEC

Ifyoupress PLAY,FF,

REW, or REC onthe

remotecontrolor the

CombinationVCR without

a cassetteinserted...

(seepages 16,17.)

pLEAsNOCASSETTE

E INSERT A CASSE'I-_

Function

Status

Rec T;me. ,_, /

R=f-naininn_1 REC 12:0"OAM ABC t

, 'A_"_ _, _P O: 25 -0:12:34

(,U/H mooe I ttSTEREO<- SP

onlysee l Ls_-, \

page

)

/4 V -- _

ReceivableBroadcast

Pypes (See page27.)

<ModelPV-M2058 only>

Current ChannelCaption

Time (See page21.)

\ Tape Speed

Ta )e Counter

Blank Tape/No Video Signal Indication

Whenever a blank section of a tape comes up

in Play mode, or when the selected channel

has no broadcast signal with the "Blue Back

OR/OFF Feature" (page 22) set to ON, the TV

screen willturn solid blue.

IftheCombinationVCR is

notinStopmodeora

cassettewithrecordtab is

notinsertedtwominutes

beforea TimerRecording

isabouttobegin...

(see pages18, 19.)

Ifheadcleaningbecomes

necessarywhileplaying

backa tape...

(see page32.)

If you press a function

button other than

STOP/EJECT oP-POWER

while the Combination VCR

is in VCR Lock mode...

(See page 23.)

PLEASE PREPARE

FOR TIMER REC

I IDEO HEADS MAY

NEED CLEANING

PLEASE I NSERT HEAD

CLEANING CASSETTE

OR REFER TO MANUAL

END:PLAY KEY

VCR LOCK ACTIVATED

Operation

l_PCheck list before you begin.

[] Allconnections are made (see page 5).

[] Your Combination VCR isplugged in.

1Press POWER to tum the Combination VCR on.

2 Select a channel using CH AV or the NUMBERED keys.

3 PressVOL'"toadjust the volume level.

Model PV-M2058 unit is shown here.

Using the 100 key

When selecting CABLE channels 100 to 125 with the NUMBERED

keys, first press the 100 key, and then enter the remaining two digits.

For example, for channel 125: Press NUMBERED keys 100-2-5.

Rapid Tune

Press R-TUNE to display the last channel you were watching.

• When selecting channels with CH AV, Previous Present

the channels must be displayed for at channel channel

least 4 seconds in order for the Combination

VCR to recognize them as a new selection. CH08 _ CH10

-11 PLAW NITE/ PHONES

REPEAT GAME Jack

Audio Mute

Press MUTE to instantly mute the sound.

Press again, to restore the previous sound level.

NITE/

1 RAPID

TUNE

MUTE

100 KEY

Model PV-M2058 remote

"is shown here.

Phones

Connect an earphone (not supplied) or headphones (not supplied) to

the Phones Jack.

SELF-DEMO Mode

In Power ON condition, hold down PLAY/REPEAT on the Combination

VCR, with no tape inserted, for 5 seconds. The demo screen appears.

To cancel: Repeat the above operation. The demo screen disappears.

NITE/GAME Mode Feature

This feature adjusts the color and picture intensity levels so the screen is

easier onthe eyes when watching a video or TV at night, or when playing

video games.

Note: This Combination VCR contains no video game software.

Press NITE/GAME repeatedly to select GAME

the desired mode.

• "NITE- or =GAME" is displayed for 4 seconds.

• Each press of NITE/GAME will change themode 0

as shown below right.

• NITE mode may be selected when watching

TV, playing a tape, or while in FM mode. GAME F I_NITE ---I_ GAME-_

mode may only be selected when watching TV

! !

and playing video games. _ Normal screen <--J

To Cancel the NITE or GAME mode, (No display)

press NITF_JGAME until the norma! screen appears.

• The previous color and picture settings will be restored.

• play mode is entered _ :--;i

• a power failure occurs !

_• input signal ischanged • FM mode is selected

Picture Adjustment

*Important: If the remote control POWER, CH &V, ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV

and ADD/DLT button does not work when pressed, press the TVNCR button on the remote and

try the button again.

I_Check list before you begin.

[] Allconnectionsaremade(seepage5).

[] YourCombinationVCR ispluggedin.

! Press ACTION* to display the

MAIN MENU.

2 Press At • • to select "I'V,"

and then press ACTION to

display the SET UP TV screen.

SET

Av4_ )

keys

3 Press &V to select "VIDEO

ADJUST," and then press

• to display the VIDEO

ADJUST screen.

...... SET UP 1_/ ......

CAPTION

INPUT SELECT : TUNER

SBJEC'r Av: KEY

SET :1_ KEY

END :ACTION KEY

4Press AT repeatedly to select

the desired adjust item, and

then press •• to adjust. (See

descriptionbelow.)

TINT' ....... I......

BRIGHTNESS ....... I......

PICTURE .............. "1

SHARPNESS ....... I......

NORMAL

SELECT:& • KEY

_:._1 I_ KEY

END :ACTION KEY

To Reset Picture Controls to the Factory Setting

Press &V and • to select and coLON .......,......

set "NORMAL." t,nt ......._......

BRIGHTNESS ....... I......

All controls return to their factory _eSSP'cTu"E.....................,......_

settings. I

_:A • KEY

SET :I_ KEY

END ;ACTiON KEY

Model PV-M2058 remote

Is shown here.

O Press ACTION three times to return to the normal

screen.

• If nobuttonispressedwithin5 minutes,thevideoadjustoveday

disappears.

Picture Adjustment

COLOR Control

To adjust the intensity of the color.

TINT Control

To adjust for the most natural fleshtones.

BRIGHTNESS Control

To adjust the brightness of the picture.

PICTURE Control

To adjust the intensity of the picture by adjusting contrast and

color level at the same time andln the proper balance.

SHARPNESS Control

To adjust the sharpness of the picture.

TV Timer Features

I_'Check list before you begin. On-Timer with Alarm Feature

The CombinationVCR canbesetto automaticallypoweroninone of 3

[] Allconnectionsaremade(seepage5). modes(TV, Playback,or FMradio).You canalsocombinethe On-Timer

[] YourCombinationVCRispluggedin. withaone minutealarmthatgraduallyincreasesinvolume.

Model PV-M2058 unit is shown here. m_

ON TIMER Indicator

DISPLA_

SLEEP

/ Press ON-TIMER to display the ON

TIMER screen.

2 Press •• to select and • to fix

the On-Timer time and also to

choose the On-Timer mode (TV,

PLAY, or FM radio). See the AV

selection order shown below.

• MakesureatapeisinsertedifPlayback

modeisselected.

• See =FMRadioFeature"on page15for

instructionsonhowto presetFM stations.

_'CH02_CH03"-'-'CH125-_

CH01 PLAY

_'FM9--FM8 ..... FM1'_)

__,uG._Yt\

SBJECT :,k V KEY

SET :)'KEY

END :ON.-TIMB_

ALARM_" "-

CANCEL: ADD/DLT KEY

SB.ECT :& v KEY

SET :4 =. KEY

END :0N-T 114B:I

3 Press AV to select alarm "ON" or

"OFF."

When "ON" is selected,

an alarm will gradually increase in

volume for one minute or until cancelled

by pressing any button on the remote or

Combination VCR (including VOL <1_ ). When the alarm sound

stops, the sound of the mode you selected will ensue.

CANCEL :ADD/DLT KEY

SELECT :& V KEY

SET :4 _" KEY

END :ON-TIMER KEY

To Make Corrections,

use AT and <, to move back and correct as necessary.

Press ON-TIMER to set the On

Timer. This screen will appear for

about 5 seconds.

• The ON TIMER indicatorlightsonthefront

panel.

To cancel,

ON TIMER SET

pressON-TIMERto redisplaythescreenin step3. Then, press

ADD/DLTtoclearthetime("6"isflashing). Now,pressON-TIMER

toend.=ONTIMER END"appearson-screenfor a few seconds.

DELETE

Model PV-M2058 remote

Is shown here.

Set the Sleep Timer

The Combination VCR can be set for auto power off.

Press SLEEP repeatedly to set the sleep

timer.

• Eachpresswillchangethetimeintheordershown

at dghL

• IfyoupressDISPLAYwiththe SLEEPTIMER set.

the remainingtimewillappearon-screen.

SLEEP TIME, R 30

,I,

SLEEP TIMER 60

SLEEP TIMER 90

,I,

SLEEP TIMER 00

To Cancel, press SLEEP repeatedly until=SLEEP TIMER Off' appears.

Closed Caption System

[] Allconnectionsare made (see page 5).

[] Your Combination VCR is plugged in.

*Important: If the remote control POWER, CH AV, ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT

buttondoesnotworkwhenpressed,presstheTVNCRbuttonontheremoteandtrythebuttonagain.

_Check list before you begin. Closed Caption

Mode Feature

Thismulti-usesystemnotonlyallowsthehearingimpairedtoenjoy

selectedprograms,butalsomakesusefulinformationfrom"IVstations

availabletoeveryone.Atfirst,readthroughthedifferentclosedcaption

optionsbelowleft.

1 Press ACTION* to display the

MAIN MENU.

2 Press &_l'4• to select=l'V,"

mlm

Model PV-M2058 remote is shown here.

and then press ACTION to

display the SET UP TV screen.

Press &T to select

=CAPTION," and then press •

to display the CAPTION screen.

MAIN MENU

...... SET UP TV ......

=mnm

INPUT SELECT :TUNER

VIDEO ADJUST

SELECT :& V KEY

SET :_ KEY

BID :ACTION KEY

4Press AT to select =CAPTION

MODE," and then press

• repeatedly to select the

desired caption mode. (See

=Caption Mode description"

below left).

• Each press • will change the

display as shown at right.

....... CAPTION .......

CC ON MUTE : CAP Cl

SELECT :& V KEY

SL=T :1_ KEY

END :ACTION KEY

(--_OFF._CAP C1-_

TEXTC2 TEXTC1

"-_- cAPc2- _)

Closed Caption Modes From

which to Choose

5 Press ACTION three times to exit the caption mode

and returnto the normal screen.

Caption Mode: CAPTION Cl or C2

A narrationof selectedTV programs

willbedisplayedonthe screen.

Checkyour"IV programlistingsfor

C.C. (ClosedCaption)broadcasts.

Caption Mode:TEXT Cl or C2

The lowerhalfofthescreenwillbe

blockedout.WhentheTV station

broadcaststext,suchas program

listings,specialinformation,etc., itwill

appearinthisspace.

Caption Mode: OFF

Narrationwillnotappearonthescreen

evenifa closedcaptionortext

broadcastisreceived.

Note:Theclosedcaptionortextsignalmay

bebroadcastoverC1,C2,orboth.

Also, textcontentscanvarysoyou j

maywishtotry differ_ht _ettings.

m W liBIH _. m

Recording and Playing Back a

Closed Caption/Text Program

Record: Your Combination VCR will

automatically record the Closed

Caption/Text signal. Just follow normal

re_ording operation.

Playback: To display the Closed

Caption narration or Text during

playback, follow steps 1-3 in the

above section, and then select the

desired caption mode in step 4.

Caption On Mute Feature

Thisfeature allowsyoutoturnoffthesoundand,atthe sametime,

displayClosedCaptionnarration.Perfectfor whenyouneedsilence,

butwouldliketocontinuewatchingtheprogram.

a Follow steps 1-3 in the above section.

bIn step 4, press • to select

"OFF."

C Press &1' to select =CC ON

MUTE," and then press

• repeatedly to select the

desired caption on mute mode.

• Eachpressof• willchangethe

display as shownatright.

• Thecaptionmaybebroadcastover

CAPC1orC2.

....... CAPTION .......

CC ON MUTIE : CAP Cl

....... CAPTION .......

CAPTION MODE : OFF

SELECT :& • KEY

SET :_ KEY

END :ACTION KEY

q Press ACTION three times to retum to the normal

screen.

e Press MUTE to mute the sound. The closed caption

narration (ifavailable) is displayed on the screen.

• Press MUTE again to resume normal sound and picture.

FM Radio

The Combination VCR has an FM

radio with built-in antenna, 9 station

preset, and a band range of

87.5-108.1 MHz. You can even set the

On-Timer (page 13) to wake up to your

favorite music station.

_Check list before you begin.

[] Allconnectionsaremade(seepage5).

[] Your Combination VCR isplugged in.

Model PV-M2058 unit is shown here.

FM Radio Feature Setup

DELETE

I I

QQ Q

QQQ

a Press FM/TV on the remote control or 1,2:oo_ |

Combination VCR to select FM Radio

mode. F., 87._,z

b In FM Radio mode, press a [ ,2:oo_ I

NUMBERED key (1~9). I [

c Press AV to select the desired I _, 8,._ |

radio station. (Each press changes I"_°Rv:Pus",ooJ_.TK_ |

the frequency by 200 KHz.) L._i 12.ooPM /

Quick Station Scan |

Holddown • or • formorethanone / Fu1 87_w

second,andthenrelease /

• . " . MEMORIZED

The CombmatlonVCR automattcally |

advancesthefrequency200KHz at a time. I

Whennearingthedesiredstation,press

• or • toselectthestation.

d Press ADD/DLT to memorize the desired station.

• To preset other stations, repeat steps b~d.

To Make Corrections,

press the NUMBERED key to select the memorized number, and then

repeat steps b-d to change the memorized station.

Using the FM Radio

1 Press FM/TV on the remote control

or Combination VCR to select FM

Radio mode.

Model PV-M2058 remote

is shown here.

SELECT

(Av)

keys

NUMBERED

keys

12:00PM

FM 1 87. 5MHz

2 Press a NUMBERED key (1-9) to

select a preset station

(see steps a~d above).

Note: Once stations are preset, the selected station and current time will

be displayed when FM/TV is pressed ON. After 10 seconds the

stationdisappears.Toremovethetime,pressDISPLAY.IfDISPLAY

ispressedwhilethestationisstillonscreenorthereisnodisplay,

theCombinationVCRstatusscreenappears.

To cancel FM Radiomode,press FM/TV againto returntothe

normalscreen.

To Select Audio Mode for FM Radio

PressAUDIO inFM Radiomodetoselect=STEREO"or"MONO."

An arrowpointstothecurrentmode.

< Example >

Pi;e 12:oopu

AU_.__ jS_'REO_No÷

L Press __.

AUDIO

12:00PM

ISTEREO

MO_O ÷

Playback a Tape

*Important: If the remote control POWER, CH &V, ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/rV and ADD/DLT

button does not work when pressed, press the TVNCR button on the remote and try the button again.

I_PCheck list before you begin.

[] Allconnectionsare made (see page 5).

[] Your Combination VCR isplugged in.

Model PV-M2058 unit is shown here.

1 Insert a cassette.

• The Combination VCR power comes on automatically.

t Press PLAY on the remote control or Combination VCR

to start playback.

• Playback begins automatically if cassette has no record tab (see

page 26).

3 Press STOP on the remote control or Combination VCR

to stop playback.

• To rewind the,tape, press REW.

T.ACK,. 3"4

V-LOCK

PLAY

FF/REW

Press STOP/EJECT on the Combination VCR to eject

the cassette.

• You may eject a cassette with power on or off.

To Find a Particular Scene During Playback

Press REW or FF on the remote control or C_)mbination

VCR to quicklylocate a scene.

• Search speed for SP mode tapes is7 times <For Model PV-M2058 only>

and SLP mode tapes 21 times the normal speed.

• Some noise bars will appear during search.

TRACKING/

V-LOCK

FFIREW

.PLAY

PAUSE

•SLOW

Model PV-M2058_remote

is shown here.

_Caution:

Please inspectyourcassettetapes

and removeany looseorpeeling

labelstopreventthemfrom

becomingjammed inyourunit.

Special Effects During Playback

These features work best in SP <For Model PV-M2058 only> or SLP mode.

The sound will be muted.

Slow Motion Playback

Press SLOW to start slow motion playback. Press PLAY or SLOW to release.

Still (Freeze_ Frame Picture

Press PAUSE to freeze and release the picture.

• To reduce picture noise, first press SLOW. Next, use the 3 or 6

NUMBERED key on the remote control or CH AV ° on the Combination

VCR toclear up the picture. Now, press PAUSE.

Frame by Frame Advance

While in Still mode, press SLOW repeatedly or hold down to advance the

still picture one frame at a time. Press PAUSE or PLAY to release.

(After the Combination VCR is in Still or Slow mode for 3 minutes, it will

switch to the Stop mode automatically to protect the tape and the video

head.)

Features for a Quality. Picture ,

DiQital Auto Tracking

This feature continuously analyzes the signal and adjusts for optimum

picture quality.

Manual Tracking Control

Use during Playback and Slow Motion mode to reduce picture noise.

Press the 3 or 6 NUMBERED key on the remote control or CH AT on the

Combination VCR until the picture clears up.

To return to Auto Tracking, press POWER off and then on again..

V-Lock Control <For Model PV-M2058 only>

In Still mode, the 3 or 6 NUMBERED k_e¥on the remote control or CH AT

on the Combination VCR operate as a V-Lock control to reduce jitter. Press

one of these keys untilthe picture is stabilized.

PanaBlackTM PictureT_!_

This Combination VCR uses a PanaBlack TM picture tube for better color

reproduction and picture contrast.

_VCheck list before you begin.

[] Allconnectionsaremade(seepage5).

[] YourCombinalJonVCR ispluggedin.

Record On a Tape

1Insert a cassette with record tab. _c=q p A[.

• The CombinationVCR power _.i _

comesonautomatically.

Model PV.M2058 unit is shown here.

5 PROGRAM 4 RECORD

TIMER Indicator Indicator

SET

(Av<_, )

keys

PAUSE

Modei PV-M2058 remote is shown here.

Selecting the Input Mode

Youcanselectthe InputModeineitherofthe

followingways.

• Press CH AY. The di,_pl_ywill chan_e in

the order below.

•, ,,.---_ lm 213

LINE<-_ 125 or

a PressACTIONtodisplaytheMAINMENU.

b Press &_l'<b" to select=TV,"andthen

....pressACTIONtodisplaytheSET UP-rv

screen.

c Press 4,V to select"INPUT SELECT,"

- andthen press • repeatedlyto select

=TUNER"or"LINE."

2 Press CH AV, or

NUMBERED keys on the

remote control to select a

channel.

• Or, pressCH ,LV onthe

CombinationVCR.

• To recordfrom anoutside

source,pressCH ,Lv to select

LINE input(see bottomof thispage).

CH O8

ASC

3 Press SPEED repeatedly

untilthe desired tape

speed is displayed (see

page 32).

SP = StandardPlay

LP = LongPlay

SLP = SuperLongPlay

8LP

remote control to start

recording.

• Or, press REC/TIMEon the

CombinationVCR.

• To edit out unwanted portions, _E_ SPECIPuSHREcFICKEyRECTIM

pressPAUSEto pausethe

recordinginprogress.To release,pressPAUSEagain.

• Youcannotviewanotherchannelduringrecording.

One Touch Timer Recording (OTR)

TheCombinationVCR stopsrecordingat a presettime.

In step 4, press RECFI'IME repeatedly to set the

length ofthe recording. Each press will change the

time as shown.

• The PROGRAM TIMER indicator lights on the front panel,

€ •

5 Press STOP on the remote control to

recording.

• Or, pressSTOP/EJECT onthe CombinationVCR.

Timer Recording

YourCombinationVCR canbeset upto do

a recordingwhileyou are awayor

otherwiseoccupied.Upto 8 programscan

be placedinmemory.Youcanchooseto

recordonetime,daily,orweekly.

*Important: Ifthe remotecontrolPOWER,CH &V, ACTION, PROG,INDEX, ON-TIMER, R-TUNE,FM/TV andADD/DLT

buttondoesnotworkwhenpressed,pressthe TVNCR buttononthe remoteand trythebuttonagain.

1 Press PROG* to display the

SET PROGRAM screen.

I_PCheck list before you begin.

rl Allconnectionsare made(see page5).

[] YourCombinationVCR ispluggedin.

[] The clockisset.

[] The tapeislongenough.

[] The recordtab isinplace.

Model PV-M2058 unit is shown here.

i L Jl

0 0 .oor_-_-_e eo O®

PROGRAM TIMER

Indicator

2 Press &V to select 'q'IMER

PROGRAM" and then press

• to display the program

screen.

• Ifa programisalreadyinmemory,

press Av repeatedly,and then • to

selectan unusedprogram number.

SET PROGRAM

SELECT:A • KEY

SET :1_ KEY

STOP

SELECT:" • KEY

SET :=, KEY

END :PROG KEY

3 Press At and • to select and set one of the

following as the DATE:

1-31 = Onetimerecording

DAILY= SametimeMON - FRI

WEEKLYSUN-SAT = Sametimeoncea week

'_8--9 ........ 31-- 1 "-- 2...... 6_,_

Today's-- 7 SELECTA IV SelectionOrder DAILY

Date LWEEKLY WEEKLY WEEKLYJ

-- (SAT) ...... (MON)-- (SUN)

4Press AT and • to select and set each of the

remaining items as follows.

Remaining Items:

• START time

• STOP time

• CH(annel) number, or LINE for outside source recording

• Category [N/A (not applicable), SPORTS, MOVIE, COMEDY,

MUSIC, DRAMA]

• Speed (SP, LP, SLP)

To Make Corrections

Repeatedly press • or < to move the cursor to the right or left,

and then make the correction.

5 Press PROG to end the program.

- This screenappearsforconfirmation. -_-__i!ii--i--ii-t_l

To Enter More Programs

Press Av and • to select and set a I (;ANC_I.:ADO/DLT KEY I

blank program number, and then repeat I SELECT1-8:A• KEY I

| ENTER :1_ KEY |

steps 3 and 4. I ENO :FROGKEY ]

O Press PROG twice to exit this mode and return to

the normal screen.

• The PROGRAMTIMERindicatorlightsonthefrontpanel."

• Ifyou'reusingacablebox,makesurethatitistunedto thedesired

channelandthepowerislefton-fortimerrecording.

Model PV-M2058 remote

is shown here.

Two minutes before the Timer Recording starts, =TIMER REC

WILL START SOON" will appear on-screen.

Model PV-M2058 unit is shown here.

Cancel a Timer Recording:

(Recording is in progress)

Hold down STOP for a few seconds to cancel the Timer

Recording.

• Anyfuturedailyorweeklyrecordingswillbe performedas

programmed. :_

[ ]

STOP/EJECT PROGRAM TIMER

Indicator

DELETE

SELECT/

SET

keys

PROG

STOP

Model PV-M205ELremote

is shown here.

Replace Program Contents:

(Recording is no.___.jtin progress)

Do steps I and 2 on previous

page. Allcurrentlyset programs

willbedisplayedon-screen.

PressAV repeatedlytoselect

thedesiredprogram,andthen

press• to displaythesettings.

(See page18.)

Press AT repeatedlytoselect,

andthenpress • toenter

replacementinformation.

Press PROG three times to exit

this mode and return to the normal

TV screen.

PDT START STOP CH SPDI

2 -; ;o::_,;;i_12¥ s;

3 lo s:_ 9:_ lo sP

4 SU 9:00plO:00p L

SELECT 1-8:& • KEY

ENTER :• KEY

END :PROG KEY

SET

END

STOP

:4 • KEY

:PROG KEY

Review or Clear Program Contents:

(Recording isnot inprogress)

Do steps 1 and 2 on previous

page. All currentlysetprograms

willbedisplayedon-screen.

Press AV repeatedly to select

the desired program number.

13 lo s:oop9:ooplO sP/

14 SU 9:00plO:OOp L LP|

I CANCEL:ADD/DLT KEY i

I SELECT 1-8:& • KEY /

I ENTER :• KEY /

tEND :P_ KEY j

C PresstheADD/DLTifyouwantto fpOTSTARTSTOPC, SPOI

cleartheprogram............... la

12 8 lO;OOp12;OOp125 SP

|3 10 8:00p 9:00p 10

d PressPROGtwicetoexitthis /4 su 9:_1o:_ • s_

modeand returntothenormalTV Ii sE'LEc_1-.:, ,,

screen. I ENTER :• KEY

L END : PROG KEY

Copying Your Tapes (Dubbing)

Connections you'll need to make.

• Usethissame connectionforyourvideo

camera,laserdiscplayer,videogames,etc.

Recording(Editing)

Combination VCR

_Video Out _ _" Video In

Playing (Source)

VCR

out

_" Audio In

Model PV-M2058 unit

Is shown here.

1 Insert a pre-recorded tape into

the Playing (source) VCR.

2 Insert a blank tape with record

tab intothe Recording (editing)

Combination VCR.

Select "LINE" as the input on the Combination VCR.

• See "Selecting the Input Mode" section on page 17.

Caution:

Unauthorizedexchanging

and/orcopyingofcopyrighted

recordingsmay becopyright

infringement.

4 Press PLAY on the VCR.

Then, press PAUSE when the tape reaches

the point at which you want to start copying.

5 Press REC on the Combination VCR, and then

immediately press.PAUSE on tl_eremote control.

_ Press PAUSE on both unitsat the same time

to begin copying.

Youcaneditoutunwantedpartsoftheoriginalrecordingby

using PAUSE (on the Recording unit) while copying isinprogress.

7 Press STOP on both unitsto StODcoDying.

Page is loading ...

Panasonic PV-M2058 Owner's manual

Brand: Panasonic

Model: PV-M2058

Category: Cassette players

Type: Owner's manual

Download PDF

report

Panasonic PV-M2058 Owner's manual

Panasonic PV-M2058 Owner's manual

Related papers

Other documents