LG LWA5WR3D Owner's manual

LG
Brand
LG
Model
LWA5WR3D
Category
Mobile air conditioners
Type
Owner's manual

This manual is also suitable for

LG LWA5WR3D is a window-type air conditioner with a range of features to keep you cool and comfortable during the hot summer months. With its powerful cooling capabilities, it can quickly cool down even the largest rooms, and its adjustable fan speed ensures you can find the perfect level of airflow for your needs. The auto swing function ensures even cooling throughout the room, and the washable filter helps to keep the air clean and fresh.

LG LWA5WR3D is a window-type air conditioner with a range of features to keep you cool and comfortable during the hot summer months. With its powerful cooling capabilities, it can quickly cool down even the largest rooms, and its adjustable fan speed ensures you can find the perfect level of airflow for your needs. The auto swing function ensures even cooling throughout the room, and the washable filter helps to keep the air clean and fresh.

OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WINDOW
LG Electronics India Pvt. Ltd.
Regd. Office : A-27, Mohan Cooperative Industrial
Estate, Mathura Road, New Delhi-110044
www.lg.com
MFL37725121
-3-
Room Air Conditioner Owner’s Manual
TABLE OF CONTENTS
Caution while operating Air Conditioner .................5
About the Controls on the Air Conditioner ..............9
Care and Maintenance .........................................24
Installation Instructions...........................................25
Before You Call for Service....................................27
10 Easy steps to find AC Tonnage .......................28
Safety Precautions .................................................4
Operating instructions
Installation Instructions
Troubleshooting tips
Safety precautions
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
n Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Please install your air-conditioner by company
authorised service franchisee / authorised service
and sales dealer.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only,
using only genuine replacement parts.
We recommend usage of voltage stabilizer with
high / low voltage cut off in areas having voltage
fluctuations.
AC TONNAGE STABILIZER KVA
(3-STEP STABILIZER)
1.0
1.5
2.0
3
4
5
-4-
Safety Precautions
To prevent injury to the user or other people and proper ty damage, the following instructions
must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness
is classified by the following indications.
n Meanings of symbols used in this manual are as shown below.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injur y or damage to proper ties only.
WARNING
n Installation
Be sure not to do.
Be sure to follow the instruction.
Don’t use a power cord, a
plug or a loose socket which
is damaged.
•
Otherwise, it may cause a fire
or electrical shock.
Always plug into a grounded
outlet.
• Otherwise, it may cause a fire
or electrical shock.
Do not modify or extend the
power cord length.
• It will cause electr ic shock or fire
due to heat generation.
Do not disassemble or
modify products.
• It may cause failure and
electric shock.
Be caution when unpacking
and installing.
• Sharp edges may cause
injury.
Do not use the power cord near
flammable gas or combustibles
such as gasoline, benzene,
thinner, etc.
• It may cause explosion or fire.
CAUTION WHILE OPERATING AC
-5-
n Operation
Do not place the power cord
near a heater.
• It may cause fire and electr ic
shock.
Do not allow water to run
into electric parts.
• It will cause failure of machine or
electric shock.
Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Ventilate the room well when
using this appliance
together with a stove, etc.
• An oxygen shortage may occur.
Turn off the power and
breaker firstly when
cleansing the unit.
• Since the fan rotates at high
speed during operation, it may
cause injury.
Turn off the main power
switch when not using it for
a long time.
• Prevent accidental startup and
the possibility of injury.
Unplug the unit if strange
sounds, odors, or smoke
come from it.
• Otherwise it may cause fire and
electric shock accident.
Do not open the suction
inlet grill of the product
during operation.
• Otherwise, it may electrical
shock and failure.
If water enters the product, turn
off the the power switch of the
main body of appliance. Contact
service center after taking the
power-plug out from the socket.
Do not place heavy object
on the power cord and take
care so that the cord should
not be pressed.
• There is danger of fire or electr ic
shock.
Do not share the outlet with
other appliances.
• It will cause electr ic shock or fire
due to heat generation.
Take the power plug out if
necessary, holding the head
of the plug and do not touc h
it with wet hands.
• Otherwise, it may cause a fire
or electrical shock.
CAUTION
n Installation
Do not operate or stop the
unit by inserting or pulling
out the power plug.
• It will cause electr ic shock or fire
due to heat generation.
Do not damage or use an
unspecified power cord.
• It will cause electr ic shock or fire.
Do not operate with wet
hands or in damp
environment.
• It will cause electr ic shock.
Hold the plug by the head
when taking it out.
• It may cause electric shock and
damage.
When gas leaks, open the
window for ventilation
before operating the unit.
• Otherwise, it may cause
explosion, and a fire.
Never touch the metal parts
of the unit when removing
the filter.
• They are sharp and may cause
injury.
Install the product so that the noise or hot
wind from the outdoor unit may not cause
any damage to the neighbors.
• Otherwise, it may cause dispute with the
neighbors.
Keep level parallel in installing the product.
• Otherwise, it may cause vibration or water
leakage.
-6-
n Operation
Be cautious not to touch the
sharp edges when
installing.
• It may cause injury.
Avoid excessive cooling and
perform ventilation
sometimes.
• Otherwise, it may do harm to
your health.
Do not insert the hands or
bars through the air inlet or
outlet during operation.
• Otherwise, it may cause
personal injury.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
• It may cause injury.
Do not block the inlet or
outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do
not use wax, thinner, or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Do not step on the
indoor/outdoor unit and do
not put anything on it.
• It may cause an injur y through
dropping of the unit or falling
down.
Always insert the filter
securely.
Clean it every two weeks.
• Operation without filters will
cause failure.
Do not drink water drained
from air conditioner.
• It contains containments and will
make you sick.
-7-
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the cord/plug is damaged, replace it with only an authorized replacement part.
part.
1. Being exposed to direct airflow for an extended period of time could be
hazardous to your health. Do not expose occupants, pets, or plants to direct
airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used
together with stoves or other heating devices.
3. Do not use this air conditioner f or non-specified special pur poses (e.g.
preserving precision devices, food, pets, plants, and art objects). Such usage
could damage the items.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can
occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner . Exposure to water can
destroy the insulation, leading to possib le electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned
off. The fan rotates at a very high speed during operation. There is a
possibility of injury if the unit’s power is accidentally triggered on while
cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Preparing for Operation
Usage
Cleaning and Maintenance
Service
Before Operation
-8-
This appliance must be properly grounded.
To minimize the risk of electric shock, you must always plug into a grounded
outlet.
Do not cut or remove the grounding.
Attaching the adapter ground terminal to the wall receptacle cover screw does
not ground the appliance unless the cover screw is metal and not insulated,
and the wall receptacle is grounded through the house wiring.
If you have any doubt whether the air conditioner is properly grounded, have
the wall receptacale and circuit checked by a qualified electrician.
1.
2.
3.
4.
Electrical Safety
-9-
About the Controls on the air conditioner
THERMOSTAT (TEMPERATURE)
The THERMOSTAT/TEMPERATURE is used to maintain the room temperature. The
compressor will cycle on and off to keep the room at the same level of comfort.
When you turn the knob to a higher number (the right side) and the indoor air will
become cooler. The temperature is selected by turning the
Thermostat/temperature knob to the desired position.
The 5 or 6 position (the middle position of arc) is a normal setting for average
conditions.
If you move the switch from a cool setting to
NOTE:
off or to a fan setting, wait at least 3
minutes before switching back to a cool
setting.
COOLING DESCRIPTIONS
For Normal Cooling- Select High Cool
or Med Cool with the OPERATION knob
at the midpoint of THERMOST AT/
TEMPER ATURE knob(as mentioned in
fig.1 & fig.2)
For Maximum Cooling- Select High
Cool with the OPERATION knob at
OFF: Stop all operation.
FAN: Circulates filte red air.
LOW COOL: Switches on the compressor and air
cooling operation at low fan speed.
MEDIUM COOL: Switches on the Compressor and
air cooling operation at medium fan speed.
.
HIGH COOL: Switches on the compressor
and air cooling operation at high fan speed.
LOW FAN: Circulates filte red at low
speed.
MED FAN: Circulates filte red air at
medium speed.
TEMPERATURE OPERATION
AUTO SWING
Wait for 3 minutes before restart
Cool Coolest
Off On
Off
High
Cool
Med
Fan
Low
Cool
Med
Cool
Low
Fan
Cooling Model (Fig.1)
Thermostat
Coo l Coo lest
Wait for 3 minutes before restart
Operation
Auto Swing
Off
On
Med
Fan
High
Cool
Low
Fan
Med
Cool
Low
Cool
Off
5
6
4
3
2
1
9
8
7
Cooling Model (Fig.2)
your
the highest number available on
Thermostat/temperarure
knob(position 6~9 in fig.2)
For Quieter & Nighttime Cooling
Select Low Cool with the
OPERATION knob at the midpoint of
Thermostat / Temperature
(position 1~4 in fig.2)
knob
MODE FAN
TIMER
TEMP
1
2
3
4
5
8
Air
Purifier
(b)
FUZZY
DRY JET
ENERGY
SAVER
INDOOR DESIRED
88 88
CLEAN
FILTER
AIR
PURIFIER
CL
10
7
(a)
MODE FAN
TIMER
TEMP
ON/OFF
1
2
3
4
5
6
AUTO SWING
FUZZY
DRY JET
ENERGY
SAVER
INDOOR DESIRED
88 88
CLEAN
FILTER
AIR
PURIFIER
CL
10
7
9 9
ON/OFF
-10-
Your Panel may look like any of below mentione d panels.
OPERATION MODE SELECTION BUTTON
Select (a) Cool, (b) Energy Saver, (c) Fuzzy & (d) Dry. In dry mode, unit will run at low fan speed only
with compressor 'ON'. When compressor is 'OFF', fan will be off.
During Energy Saver mode, fan stops when compressor stops cooling. Approximately after 3 minutes
fan will turn ON to determine if cooling is needed. If cooling is not needed, the fan turns OFF again.
ON/OFF TIMER
Set the time of on/off operation. The timer can be set by the one hour for a maximum of 12 hours. In case of Auto
Restart, ON/OFF Timer is automatically cancelled.
Used to Start or Stop the Plasma Purification function.
FOR PLASMA MODEL-
AIR PURIFIER
AUTO RESTART
In failure of electric power the unit runs as previous setting operation when power returns.
FAN SPEED SELECTOR
Select the fan speed in Three steps Low / Med / High
ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 18°C to 30°C.
AUTO SWING
The vertical louver swings horizontally by the automatic system and stops when you press the button again.
SIGNAL RECEIVER
POWER (ON/OFF) BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
1
2
3
4
5
6
7
8
Fan speed in two steps Low (F1) / High (F2) in select models.
Operation modes may vary in select models.
Child Lock is used to prevent children from changing the settings of the unit. It can be activated when the
unit is ON by pressing the Fan Key (4) and the Timer Key (3) simultaneously for 5-10 seconds. When the
Child Lock is active, icon 'CL' lights upon the control panel. Now, the keys on the Control Panel and the
Remote Controller will stop working. To deactivate the Child Lock, press again the Fan Key (4) and the
Timer Key (3) simultaneously for 5-10 seconds. When Child Lock is deactivated icon 'CL' goes off on the
Display Panel.
CHILD LOCK
9
a. In case when CLEAN FILTER indication is 'ON' on the Control Panel, the Plasma Pure Filter (For select
models) needs to be cleaned. Turn 'OFF' the unit and remove Plasma Filter by opening the grill. Then
clean the filter and replace it back to it original position. After this close the grill and turn 'ON' the unit.
The CLEAN FILTER indication goes 'OFF' on the Display Panel. In case it doesn't reset the unit.
CLEAN FILTER
10
b. In case when CLEAN FILTER indication is blinking on the Control Panel, the Anti-Bacteria / Deo-Air Filter
needs to be cleaned. Turn 'OFF' the unit and remove the filter by opening the grill. Then clean the filter
and replace it back to the original position. After this close the grill and turn 'ON' the unit. Then press
the Temperature Down key (5) continuously for 5 seconds. The CLEAN FILTER indication goes 'OFF'
on the Control Panel.
FUZZY
DRY JET
ENERGY
SAVER
INDOOR DESIRED
88 88
CLEAN
FILTER
AIR
PURIFIER
CL
10
9
(c)
TIMER
FAN
SPEED
MODE
AUTO
SWING
TEMP
ON/OFF
1
5
6
4
3
7
2
-11-
How to Insert the Batteries
Remove the battery cover by pulling it according to the
arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery are installed correctly.
Reattach the cover by sliding it back into position.
NOTES:
• Use 2 AAA(1.5volt) batteries. Do not use rechargeable
batteries.
• The remote control may be stored by mounting it
on a wall.
• To operate the room air conditioner, aim the
remote control at the signal receptor.
Storage and Tips For Using the Remote Control
MOE
D
F N
A
IMET R
TEMP
W
PO
ER
AU
W INT
O
S
G
F
ZU
ZY
DR
Y
JET
ENER
GY
SA
VER
NDOO
I
R
SRE
D
E
I D
88
88
CLEA
N
FILTE
R
ARI
I
E
FLT
R
C
L
ME
R
TI
F
N
A
E
SPED
O
M
DE
AUTO
SWIN
G
TEMP
ON/OF
F
(a) (b)
-12-
The remote control transmits the signals to the system.
Features of the Remote Control- Door Closed
1
START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
2
OPERATION MODE
SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE
SETTING BUTTONS
Used to select the room temperature.
3
4
INDOOR FAN SPEED
SELECTOR
Used to select fan speed in four steps
Low, Medium, High, or CHAOS*.
JET COOL
Used to start or stop the speed
cooling. (Speed cooling operates
high fan speed in cooling mode).
5
AIR SWING BUTTON
Used to stop or start vertical louver
movement.
6
Operation Mode
Cooling Mode
Fuzzy Mode
Dry Mode
(Cooling Model)
- Your unit shall have either Type A,Type B, Type C or Type D Remote Control
* Available in selected models. In other models, CHAOS is same as high speed.
ON
Signal transmitter
Flip-up door
(closed)
2
4
5 1
3
6
1
3
5
4
Flip-up door
(closed)
2
Signal transmitter
ON
Signal transmitter
Flip-up door
(closed)
2
4
5 1
3
JET COOL TEMP A/SWING
FAN SPEED POWER
O
L
J
E
T
C O
A/SWING
P
O
WE
R
TEMP
FAN SPEED
MODE
MODE
6
1
3
5
4
Flip-up door
(closed)
2
Signal transmitter
TYPE A TYPE B TYPE C TYPE D
66
About the remote control on the system
The Remote Control unit will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
Precaution:
-13-
ON
OFF
CANCEL
SET
3
4
6
8
10
1
2
7
9
5
Flip-up door
(opened)
Signal
transmitter
Signal
transmitter
ON OFF
PLASMA
SET
CANCEL
4
5
6
7
9
1
2
3
8
Features of the Remote Control- Door Opened
1
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation.
2
TIME SETTING BUTTONS
Used to adjust the time, (See page 21)
TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
(See page 21)
3
4
SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
(See page 21)
FAN MODE BUTTON
Used to circulate the room air without cooling
or heating (turns indoor fan on/off).
(See page 22)
5
ROOM TEMPERATURE
CHECKING BUTTON
Used to check the room temperature.
6
PLASMA (OPTIONAL)
Used to start or stop the plasma-purification
function. (See page 18)
7
PERSONAL MODE
8
Used to run the unit in Personal Mode
(See page 19)
RESET BUTTON
9
Used prior to resetting time or after replacing
batteries.
2nd F Button (Type C or Type D
Remote Control)
10
Used prior to using modes printed in blue at
the bottom of buttons. (See page 20)
3
4
6
8
10
1
2
7
9
5
Flip-up door
(opened)
Signal
transmitter
Signal
transmitter
ON OFF
PLASMA
SET
CANCEL
4
5
6
7
9
1
2
3
8
JET COOL TEMP A/SWING
FAN SPEED POWER
TIMER SLEEP
TIMER
FAN
ROOM
MODE
RESET
PERSONAL MODE
J
T
C
O
OLE
A/SWING
PO
W
E
R
TEMP
FAN SPEED
MODE SLEEP CANCEL
TIMERON OFF SET
FAN ROOM
TIMER
PERSONAL MODE
-14-
To raise the temperature
To lower the temperature
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door on the remote control. To select Cooling
Mode, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Close the door on the remote control. Set the temperature
higher than the room temperature. The temperature can be
set within a range of 18°C~30°C in 1°C increments.
Set the fan speed again with the door
of the remote control still closed. You
can select the fan speed in four steps-
low, medium, high or CHAOS*. Each
time the button is pressed, the fan
speed mode is shifted.
Cooling Mode
1
2
3
4
JET COOL TEMP A/SWING
FAN SPEED POWER
MODE
POWER
FAN SPEED
How to use the Operation Mode Selection button
MODE
Cooling Fuzzy Dry
* Available in selected models. In other models, CHAOS is same as high speed.
-15-
To raise the temperature
To lower the temperature
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door on the remote control. To select Fuzzy
Mode, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature. If
you want to change the set temperature, close the door on
the remote control and press the Room Temperature Setting
buttons. The cooler or warmer you feel, the more times (up to
two times) you should press the button. The set temperature
will be changed automatically.
During Fuzzy Mode :
You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
Fuzzy Mode
1
2
3
JET COOL TEMP A/SWING
FAN SPEED POWER
POWER
MODE
MODE
Cooling Fuzzy Dry
-16-
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door on the remote control. To select Dry Mode,
press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
During Dry Mode :
Unit will run at low fan speed with compressor 'ON'. When compressor is 'OFF', fan will be 'OFF'.
Dry Mode
1
2
JET COOL TEMP A/SWING
FAN SPEED POWER
POWER
MODE
MODE
Cooling Fuzzy Dry
Set temperature cannot be changed.
-17-
or or
NOTE:
During the JET COOL function at any moment, the A/C starts to blow the cool air at
high speed for 30 minutes setting the room temp. automatically to 18°C. It is
especially used to cool the room temp. in the shortest time in a hot summer.
In order to return to the normal cooling mode from the JET COOL mode, you just press
either the operation mode selection button, Fan Speed button or temp. setting button
or the JET COOL button again.
Press the Start/Stop button.
The unit will respond with
a beep.
Press the Jet Cool button to operate
the speed cooling mode and the unit
will operate in high fan speed
on cooling mode for 30 minutes.
To cancel the Jet Cool mode, press the Jet Cool button
again or the fan speed button or the room temperature
setting button or the Fan Mode Button.
Jet Cool Mode
1
2
3
JET COOL TEMP A/SWING
FAN SPEED POWER
POWER
JET COOL
JET COOL
FAN SPEED
TEMP
FAN
or
-18-
PLASMA
PLASMA
PLASMA Purification Operation(Optional)
Press the Start/Stop button.
The unit will respond with a
beep.
1
Open the door on the remote control.
Press the PLASMA air purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
2
Set the fan speed again with door of the remote control
closed. You can select the fan speed in four steps-low,
medium, high or CHAOS*. Each time the
button is pressed, the fan speed mode
is shifted.
Air purifying operation (PLASMA) can be with cooling
or any other operations.
PLASMA Air Purifying Operation only
If you press only the PLASMA button, PLASMA
air purifying operates only.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS*.
Each time the button ( ) is pressed, the fan
speed mode is shifted.
3
JET COOL TEMP A/SWING
FAN SPEED POWER
POWER
FAN SPEED
* Available in selected models. In other models, CHAOS is same as high speed.
-19-
Personal Mode (P1 / P2 / P3)
Press the Start/Stop button.
The unit will respond with a
beep.
1
Open the door on the Remote Control.
Press the Personal Mode operation button.
The last personal mode P1 or P2 or P3,
which was running will be displayed on the
control panel. The unit will start to operate
as per the last saved settings of desired
temperature, fan speed, auto-swing for the
personal mode displayed.
2
JET COOL TEMP A/SWING
FAN SPEED POWER
POWER
PERSONAL MODE
PERSONAL MODE
Settings for desired temperature, fan speed, auto-swing can
be changed for each mode P1/P2/P3 separately after the
particular mode P1/P2/P3 has been selected using the
personal mode key.
3
After the settings have been changed or not changed for
desired temperature, fan speed, auto-swing in a particular
mode (P1/P2/ P3) the temperature setting key, fan speed key
auto-swing key will be locked within 20~25 sec of the last key
pressed during the process of changing the settings. Only
buzzer will sound when these keys are pressed. However, if
the personal mode key is pressed again the keys will be
unlocked.
PERSONAL MODE
When the unit is running in any of the personal modes P1/P2/
P3 and it is turned "OFF" and then turn "ON" using the control
panel, then the unit will start in cooling mode.
Personal Mode can be cancelled using the mode key, fan key
and the jet cool key on the remote controller and mode key on
the control panel.
• Personal Mode is used to save the independent setting for the desired temperature, fan speed
and auto-swing for 3 different modes P1, P2, P3. Pressing the Personal Mode key on the remote
control will change the Personal Mode in the sequence P1 – P2 – P3 – P1 on the control panel.
Temperature setting key, fan speed key and auto-swing key on the control panel will be locked as
soon as Personal Mode is selected. Only buzzer will sound when these keys are pressed.
• Personal Mode will operate only when the unit is running in cool mode.
4
5
6
-20-
2nd F Operation
1
2
2nd function goes off in a short time automatically or when
the button is pressed again.
3
nd
2 F
nd
2 F
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door of the remote control and press the 2nd
Function button to operate functions printed in blue at bottom
of buttons.
(Check the indication of 2nd function on remote control
display.)
nd
2 F
ON
OFF
CANCEL
SET
ET
L
J
C
O
O
A/SWING
OWE
RP
TEMP
FAN SPEED
MODE SLEEP CANCEL
TIMERON OFF SET
FAN ROOM
TIMER
PERSONAL MODE
POWER
ON
OFF
SET
TIMERON OFF SET
TIMER
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

LG LWA5WR3D Owner's manual

LG
Brand
LG
Model
LWA5WR3D
Category
Mobile air conditioners
Type
Owner's manual
This manual is also suitable for

LG LWA5WR3D is a window-type air conditioner with a range of features to keep you cool and comfortable during the hot summer months. With its powerful cooling capabilities, it can quickly cool down even the largest rooms, and its adjustable fan speed ensures you can find the perfect level of airflow for your needs. The auto swing function ensures even cooling throughout the room, and the washable filter helps to keep the air clean and fresh.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents