LG E1940S-PN Owner's manual

Brand: LG

Model: E1940S-PN

Category: TVs & monitors

Type: Owner's manual

LG E1940S-PN is a high-quality monitor designed to provide users with an exceptional viewing experience. It features a 19-inch widescreen display with a resolution of 1366 x 768 pixels, delivering crisp and detailed images. With its 5ms response time, this monitor is ideal for gaming and watching fast-paced videos without motion blur. The LG E1940S-PN also boasts an impressive contrast ratio of 1000:1, ensuring deep blacks and bright whites for stunning visuals.

Make sure to read the Important Precautions before using the

product. Keep the User's Guide(CD) in an accessible place for future

reference.

See the label attached on the product and give the information to

your dealer when you ask for service.

E1940T

E2040T

E2240T

E2340T

E1940S

E2040S

E2240S

E2340S

User’s Guide

This unit has been engineered and manufactured to ensure your personal safety,

however improper use may result in potential electrical shock or fire hazards. In

order to allow the proper operation of all safeguards incorporated in this display,

observe the following basic rules for its installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power

cord, make sure that it is certified by the applicable national standards if not being

provided by the supplier. If the power cable is faulty in any way, please contact the

manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the

socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this

manual or listed on the display. If you are not sure what type of power supply you

have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Call your

service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from

the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys

or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period

of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug

it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal

cable because it can be very dangerous. It can cause electric shock.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the

display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release

of heat generated during operation. If these openings are blocked, built-up heat

can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,

mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause

some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for

your LCD display. If used under any mode except the recommended resolution,

some scaled or processed images may appear on the screen. However, this is

characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the

screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you

drop the product, the damaged product can cause electric shock or fire. Contact

an authorized the service center for repair.

Avoid high temperatures and humidity.

Important Precautions

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft

cloth to prevent scratching. Do not clean with a wet cloth or spray water or other

liquids directly onto the product. An electric shock may occur. (Do not use

chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;

wipe in one direction only. Too much moisture may cause staining.

On Repacking

Do not throw away the carton and packing materials. They make an ideal

container in which to transport the unit. When shipping the unit to another

location, repack it in its original material.

On Disposal (Only , Hg lamp used LCD Monitor)

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of

your local authority.

Accessories

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your

monitor. If any items are missing, contact your dealer.

User's Guide/Cards

Power Cord

15-pin D-Sub Signal Cable

(To set it up, this signal cable may be

attached to this product before

shipping out.)

DVI-D Signal Cable

(This feature is not available in

all countries.)

NOTE

This accessories may look different from those shown here.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite

cores to maintain standard compliance for the product.

AC-DC adapter

(Depending on the country)

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on

a soft cloth.

2. Check the direction of the Stand Base, and connect it into the Stand Body.

Stand Base

Stand Body

3. Once assembled take the monitor up carefully and face the front side.

Important

This illustration depicts the general model of connection. Your monitor may differ from the

items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and

get damaged or injure your foot.

Connecting the Display

Disassembling the stand

1. Place the monitor with its front facing downward on

a soft cloth.

2. Nip Latch inside, Take off the stand base from stand body.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices is turned off.

Positioning your display

-After installation, adjust the angle as shown below.

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~15˚

ERGONOMIC

It is recommended that in order to maintain an ergonomic and comfortable viewing position,

the forward tilt angle of the monitor should not exceed 5 degrees.

Do not touch or press the screen when

adjusting the angle of the monitor.

When adjusting the angle of the screen, do

not put your finger(s) in between the head of

the monitor and the stand body. You can

hurt your finger(s).

Connecting the Display E1940T/E2040T/E2240T/E2340T

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts

the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen

flicker or tilted screen while using the device or after changing screen resolution, press the

AUTO function button to improve resolution.

Connect DVI-D(Digital signal) Cable

Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connect signal input cable and power cord in order, then tighten the screw

of the signal cable.

Connecting with the PC

Wall-outlet type

Mac adapter : For Apple Macintosh use, a

separate plug adapter is needed to change the

15 pin high density (3 row) D-sub VGA

connector on the supplied cable to a 15 pin 2

row connector.

When using a D-Sub signal input cable connector

for Macintosh

Varies according to model.

DVI-D (This feature is not available in all countries.)

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

Power Button

Connecting the Display E1940S/E2040S/E2240S/E2340S

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts

the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen

flicker or tilted screen while using the device or after changing screen resolution, press the

AUTO function button to improve resolution.

Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connect signal input cable and power cord in order, then tighten the screw

of the signal cable.

Connecting with the PC

Wall-outlet type

Mac adapter : For Apple Macintosh use, a

separate plug adapter is needed to change the

15 pin high density (3 row) D-sub VGA

connector on the supplied cable to a 15 pin 2

row connector.

When using a D-Sub signal input cable connector for

Macintosh

Varies according to model.

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

Power Button

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Control Panel Functions

Front Panel Controls

MODE Button

Use this button to enter F-ENGINE, ORIGINAL RATIO,

PHOTO EFFECT menus.

For more information, refer to page 18.

MENU Button

OSD LOCKED/UNLOCKED

This function allows you to lock the current control

settings, so that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds.

The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing

the MENU button for several seconds. The message

"OSD UNLOCKED" should appear.

Control Panel Functions

AUTO Button

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press

the AUTO button before entering the On Screen

Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to

the ideal settings for the current screen resolution

size (display mode).

The best display mode is

E1940S/E1940T : 1360 x 768

E2040S/E2040T : 1600 x 900

E2240S/E2340S/E2240T/E2340T : 1920 x1080

INPUT Button

Use this button to turn the display on or off.

The power indicator stays white if the display is running

properly (On Mode). If the display is in Sleep Mode

(Energy Saving), the power indicator is blinking white.

Power Button &

Power Indicator

When two input signals are connected, you can select the

input signal (D-SUB/DVI) you want. When only one signal

is connected, it is automatically detected. The default

setting is D-Sub.

(SOURCE Hot key)

Exit the OSD(On Screen Display).

EXIT Button

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating

parameters of the display is quick and easy with the On Screen

Display Control system.

A short example is given below to familiarize you with the use of the

controls. The following section is an outline of the available

adjustments and selections you can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the discretionary Button, then the main menu of the OSD appears.

To access a control, use the corresponding Buttons.

Use the / Buttons to adjust the image to the desired level.

Use the Button to select other sub-menu items.

Press the EXIT Button to exit from the OSD.

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,

and setting menus.

F-ENGINE

ORIGINAL

RATIO

PHOTO

EFFECT

MODE

To select or customize desired

image settings

DSUB

DVI-D

LANGUAGE

POWER INDICATOR

WHITE BALANCE

FACTORY RESET

To customize the screen status

for a user's operating

environment

OTHERS

HORIZONTAL

VERTICAL

CLOCK

PHASE

DISPLAY

To adjust the position of the

screen

COLOR TEMP

(PRESET / USER)

GAMMA

COLOR

To customize the color of the

screen

BRIGHTNESS

CONTRAST

SHARPNESS

PICTURE

To adjust the brightness, contrast

and sharpness of the screen

NOTE

The order of icons may differ depending on the model (13~21).

DSUB

DVI-D

DSUB

DVI-D

DSUB

DVI-D

DSUB

DVI-D

DSUB

To adjust the image size

DSUB

DVI-D

Main menu Sub-menu

Supported input

Description

To improve the clarity and

stability of the screen

To adjust the screen color mode

: D-SUB(Analog signal) input

: DVI-D(Digital signal) input

DSUB

DVI-D

NORMAL

MOVIE

INTERNET

DEMO

WIDE

ORIGINAL

NORMAL

GAUSSIAN BLUR

SEPIA

MONOCHROME

DSUB

DVI-D

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the all items shown on the Menu.

Sub-

menus

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Menu Name

Icons

Button

Tip

Exit

Adjust (Decrease/Increase)

Select another sub-menu

Restart to select sub-menu

Press the MENU Button, then the main menu of the OSD appears.

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

Exit : Exit

: Decrease

: Increase

: Select another sub-menu

: Restart to select sub-menu

BRIGHTNESS

CONTRAST

SHARPNESS

To adjust the brightness of the screen.

To adjust the contrast of the screen.

To adjust the clearness of the screen.

PRESET

Select the screen color.

• sRGB: Set the screen color to fit the

sRGB standard color

specification.

• 6500K: Slightly reddish white.

• 9300K: Slightly bluish white.

RED

Set your own red color levels.

GREEN

Set your own green color levels.

BLUE

Set your own blue color levels.

GAMMA

Set your own gamma value. : 0 / 1 / 2

On the monitor, high gamma values

display whitish images and low

gamma values display blackish

images.

PHOTO EFFECT

COLOR TEMP

USER

Exit : Exit

: Decrease

: Increase

: Select another sub-menu

: Restart to select sub-menu

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

CLOCK

PHASE

To minimize any vertical bars or

stripes visible on the screen

background.

The horizontal screen size will also

change.

To adjust the focus of the display.

This item allows you to remove any

horizontal noise and clear or sharpen

the image of characters.

HORIZONTAL

VERTICAL

To move image left and right.

To move image up and down.

PHOTO EFFECT

E1940T/E2040T/E2240T/E2340T

E1940S/E2040S/E2240S/E2340S

Exit : Exit

: Decrease

: Increase

: Select another sub-menu

: Restart to select sub-menu

On Screen Display(OSD) Selection and Adjustment

Press the , buttons to reset

immediately.

Main menu Sub menu Description

To choose the language in which the

control names are displayed.

LANGUAGE

WHITE

BALANCE

If the output of the video card is

different the required specifications,

the color level may deteriorate due

to video signal distortion. Using this

function, the signal level is adjusted

to fit into the standard output level of

the video card in order to provide the

optimal image.

Activate this function when white

and black colors are present in the

screen.

Restore all factory default settings except

"LANGUAGE."

FACTORY

RESET

POWER

INDICATOR

Use this function to set the power

indicator on the front side of the monitor

to ON or OFF.

If you set OFF, it will go off.

If you set ON at any time, the power

indicator will automatically be turned on.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the

WHITE BALANCE function again. This function will be enabled only when the input signal is an analog

signal.

PHOTO EFFECT

Exit : Exit

: Decrease

: Increase

: Select another sub-menu

: Restart to select sub-menu

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the all items shown on the Menu.

Sub-

menus

NOTE

OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Menu Name

Icons

Button

Tip

Exit

Adjust (Decrease/Increase)

Select another sub-menu

Restart to select sub-menu

Press the MODE Button, then the main menu of the OSD appears.

On Screen Display(OSD) Selection and Adjustment

PHOTO EFFECT

Main menu Sub menu Description

NORMAL

Select this when you want to use the product

in the most general using environment.

MOVIE

Select this when you are watching a video or

movie.

INTERNET

Select this when you are working on the

document (Word etc.)

DEMO

This is used for advertising in the store. The

screen will be divided to show the standard

mode on the left and video mode on the right so

that the consumers can check the difference

after applying the video mode.

Exit : Exit

: Move

: Select another sub-menu

: Restart to select sub-menu

Page is loading ...

LG E1940S-PN Owner's manual

Brand: LG

Model: E1940S-PN

Category: TVs & monitors

Type: Owner's manual

Download PDF

report

LG E1940S-PN Owner's manual

LG E1940S-PN Owner's manual

Related papers

Other documents