Hitachi H 65SD2 User manual

Brand: Hitachi

Model: H 65SD2

Type: User manual

This manual is also suitable for

H 65 SD2

H 65SD2

Demolition Hammer

Hammer

Marteau de démolition

Martello demolitore

Hakhamer

Martillo demoledor

Martelo

∫ÚÔ˘ÛÙÈÎÔ

Read through carefully and understand these instructions before use.

Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.

Lire soigneusement et bien assimiler ces instructions avant usage.

Prima dell’uso leggere attentamente e comprendere queste istruzioni.

Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen.

Leer cuidadosamente y comprender estas instrucciones antes del uso.

Antes de usar, leia com cuidado para assimilar estas instruções.

∆ιαάστε πρσεκτικά και κατανήσετε αυτές τις δηγίες πριν τη ρήση.

Handling instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

Instrucciones de manejo

Instruções de uso

δηγίες ειρισµύ

705

Code No. C99139572 N

Printed in Japan

Nederlands

EC VERKLARING VAN CONFORMITEIT

Wij verklaren onder eigen verantwoordelijkheid dat dit produkt conform

de richtlijnen of gestandardiseerde documenten EN60745, EN55014

en EN61000 voldoet aan de eisen van EEG Bepalingen 73/23/EEG, 89/

336/EEG, 98/37/EC en 2000/14/EC.

2000/14/EC

• Type gereedschap: Handbetonbreekhamer

• Typenaam: H65SD2

• Gewicht gereedschap: 18,5 kg

• Conformiteit vaststellingsprocedure: ANNEX VI Paragraaf 5

• In kennis gesteld Europees instituut: CE0032 TÜV NORD CERT Am

TÜV 1, 30519 Hannover, Duitsland

• Gemeten geluidsdruk: 102 dB

• Gegarandeerde geluidsdruk: 104 dB

Deze verklaring is van toepassing op produkten voorzien van de CE-markeringen.

Español

DECLARACIÓN DE CONFORMIDAD DE LA CE

Declaramos bajo nuestra única responsabilidad que este producto está

de acuerdo con las normas o con los documentos de normalización

EN60745, EN55014 y EN61000, según indican las Directrices del Consejo

73/23/CEE, 89/336/CEE, 98/37/CE y 2000/14/CE.

2000/14/CE

• Tipo de dispositivo: martillo manual para romper el hormigón

• Nombre del modelo: H65SD2

• Peso del dispositivo: 18,5 kg

• Procedimiento de evaluación de conformidad: ANEXO VI Párrafo 5

• Entidad europea notificada: CE 0032 TÜV NORD CERT Am TÜV 1,

30519 Hannover, Alemania

• Nivel de potencia acústica medida: 102 dB

• Nivel de potencia acústica garantizada: 104 dB

Esta declaración se aplica a los productos con marcas de la CE.

Português

DECLARAÇÃO DE CONFORMIDADE CE

Declaramos, sob nossa única e inteira responsabilidade, que este

produto está de acordo com as normas ou documentos normativos

EN60745, EN55014 e EN61000, em conformidade com as Diretrizes

73/23/CEE, 89/336/CEE, 98/37/CE e 2000/14/CE do Conselho.

2000/14/CE

• Tipo de equipamento: Martelo de mão para demolição de concreto

• Nome do tipo: H65SD2

• Peso do equipamento: 18,5 kg

• Procedimento de avaliação de conformidade: ANEXO VI Parágrafo 5

• Órgão europeu notificado: CE 0032 TÜV NORD CERT Am TÜV 1,

30519 Hannover, Alemanha

• Nível medido de potência de som: 102 dB

• Nível garantido de potência de som: 104 dB

Esta declaração se aplica aos produtos designados CE.

Ελληνικά

EK ∆ΗΛ·ΣΗ ΕΝΑΡΜΝΙΣΜΥ

∆ηλώνυµε µε απ&λυτη υπευθυν&τητα &τι αυτ& τ πρι&ν είναι

εναρµνισµέν µε τα πρ&τυπα ή τα έγρα(α πρτύπων EN60745,

EN50144 και EN61000 σε συµ(ωνία µε τις δηγίες τυ Συµυλίυ

73/23/EOK, 89/336/EOK και / ή 98/37/EK και 2000/14/EK.

2000/14/EK

• Τύπς µηανήµατς:Θραύστης τσιµέντυ πυ κρατιέται απ& τ έρι

• νµασία τύπυ: H65SD2

• Βάρς µηανήµατς:18,5 kg

• ∆ιαδικασία ελέγυ εναρµνισµύ: Παράρτηµα VI Παράγρα(ς 5

• Eυρωπαϊκή πλευρά πρς γνωστπίηση: CE 0032 TÜV NORD CERT

Am TÜV 1, 30519 Hannover, Germany

• Μετρηµέν επίπεδ ηητικής ισύς: 102 dB

• Εγγυηµέν επίπεδ ηητικής ισύς: 104 dB

Αυτή η δήλωση ισύει στ πρι&ν µε τ σηµάδι CE.

English

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in

conformity with standards or standardized documents EN60745,

EN55014 and EN61000 in accordance with Council Directives 73/23/

EEC, 89/336/EEC, 98/37/EC and 2000/14/EC.

2000/14/EC

• Type of equipment: Hand-held concrete breaker

• Type name: H65SD2

• Weight of equipment: 18.5 kg

• Conformity assessment procedure: ANNEX VI, Paragraph 5

• European Notified Body: CE 0032 TÜV NORD CERT Am TÜV 1,

30519 Hannover, Germany

• Measured sound power level: 102 dB

• Guaranteed sound power level: 104 dB

This declaration is applicable to the product affixed CE marking.

Deutsch

ERKLÄRUNG ZUR KONFORMITÄT MIT CE-REGELN

Wir erklären mit alleiniger Verantwortung, daß dieses Produkt den

Standards oder standardisierten Dokumenten EN60745, EN55014 und

EN61000 in Übereinstimmung mit den Direktiven des Europarats 73/

23/EWG, 89/336/EWG, 98/37/CE und 2000/14/CE entspricht.

2000/14/CE

• Art der Ausrüstung: Handgehaltener Betonbrecher

• Typname: H65SD2

• Gewicht der Ausrüstung: 18,5 kg

• Übereinstimmungsbeurteilungsverfahren: ANNEX VI Paragraph 5

• Benannte europäische Stelle: CE 0032 – der in TÜV NORD CERT,

Am TÜV 1, 30519 Hannover, Deutschland

• Gemessener Schallleistungspegel:102 dB

• Garantierter Schallleistungspegel: 104 dB

Diese Erklärung gilt für Produkte, die die CE-Markierung tragen.

Français

DECLARATION DE CONFORMITE CE

Nous déclarons sous notre seule et entière respon-sabilité que ce

produit est conforme aux normes ou documents normalisés EN60745,

EN55014 et EN61000 en accord avec les Directives 73/23/CEE, 89/336/

CEE, 98/37/CE et 2000/14/CE du Conseil.

2000/14/CE

• Type de matériel : Outil de démolition à main

• Nom du type : H65SD2

• Poids du matériel : 18,5 kg

• Procédure d’évaluation de conformité : ANNEXE VI Paragraphe 5

• Organisme européen notifié : CE 0032 TÜV NORD CERT Am TÜV 1,

30519 Hanovre, Allemagne

• Niveau de puissance sonore mesuré : 102 dB

• Niveau de puissance sonore garanti : 104 dB

Cette déclaration s’applique aux produits désignés CE.

Italiano

DICHIARAZIONE DI CONFORMITÀ CE

Si dichiara sotto nostra responsabilità che questo prodotto è conforme

agli standard o ai documenti standardizzati EN60745, EN55014 e

EN61000 conforme alle direttive 73/23/CEE, 89/336/CEE, 98/37/CE e

2000/14/CE del concilio.

2000/14/CE

• Tipo di apparecchiatura: Demolitore per cemento portatile

• Nome di tipo: H65SD2

• Peso dell'apparecchiatura: 18,5 kg

• Procedimento di valutazione conformità: ALLEGATO VI Paragrafo 5

• Ente europeo notificato: CE 0032 TÜV NORD CERT Am TÜV 1, 30519

Hannover, Germania

• Livello di potenza sonora misurato: 102 dB

• Livello di potenza sonora garantito: 104 dB

Questa dichiarazione è applicabile ai prodotti cui sono applicati i marchi CE.

Representative office in Europe

Hitachi Power Tools Europe GmbH

Siemensring 34, 47877 Willich 1, F. R. Germany

Head office in Japan

Hitachi Koki Co., Ltd.

Shinagawa Intercity Tower A, 15-1, Konan 2-chome,

Minato-ku, Tokyo, Japan

31. 5. 2007

K. Kato

Board Director

Hitachi Koki Co., Ltd.

21 39

7mm

17mm

1 3

English Deutsch Français Italiano

Tool shank Werkzeugschaft Queue d’outil

Retainer Rückhalter Tige de retenue

Front cover Frontdeckel Couvercle frontal

Recessed portion Ausgesparter Teil Section rentrée

Wear limit Verschleißgrenze Limite d’usure

No. of Carbon brush Nr. der kohlebürste No. de balai en carbone

Cap cover Kappendeckel Couvercle

Hexagon socket hd. bolt Sechskantsteckfassung Boulon hexagonal

M4 × 8 für Bolzen M4 × 8 M4 × 8

Gambo dell’utensile

Sostegno

Coperchio anteriore

Parte repressa

Limite d’usura

Numero delle spazzole

di carbone

Copri-tappo

Bullone a teste

easgonale M4 × 8

Nederlands Español Português Ελληνικά

Boorschacht Barrena

Houder Retén

Voorzijde Cubierta delantera

Het verlaagde gedeelte Parte hendida

Slijtage-limiet Límite de desgaste

Nr. van koolborstel

No. de contacto de

carbón

Kap-afdekking Cubierta de la tapa

Bout met zeskantige kop Perno de cabeza

M4 × 8 hexagonal M4 × 8

Haste da ferramenta

Retentor

Tampa frontal

Parte rebaixada

Limite de desgaste

Nº de escova de carvão

Protetor da tampa

Parafuso de cabeça

sextavada M4 × 8

Στέλες εργαλείυ

Αντιστήριγµα

Μπρστιν κάλυµµα

Τµήµα πυ έει

εισωρήσει

ρι θράς

Αρ. Καρ!υνακίων

Καπάκι καλύµµατς

Μπυλνι ε#αγ. κίλης

κεαλής Μ4 × 8

ABC D

61 620-1VV 1 6201VVCMPS2I

62 956-948 1

63 600-1VV 1 6001VVCMPS2L

64 944-911 1

65 620-3DD 1 6203DDCMPS2L

66 960-251 2 D5 × 65

67 956-764 2

68 956-850 2 4 × 16

69 994-190 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

70 944-907 1

71 996-370 1

72-1 360-286C 1 110V-115V ”71”

72-2 360-286E 1 220V-240V ”71”

72-3 360-286F 1 240V ”71”

73 306-098 1

74 945-932 2

75-1 340-259C 1 110V-115V ”74”

75-2 340-259E 1 220V-230V ”74”

75-3 340-259F 1 240V ”74”

76 322-530 1

77 944-954 1

78 620-1DD 1 6201DDCMPS2L

79 323-740 1

80 323-741 1

81 ——————1

82 323-743 1

83 991-711 4

84 323-744 1

85 959-141 2

86 317-491 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

87 930-153 1

88 938-477 2 M5 × 8

89 323-726 1

90 991-690 2 M5 × 12

91 959-140 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

92 938-307 1

93 307-028 3 D4 × 25

94 984-750 2 D4 × 16

95-1 960-266 1

95-2 981-987Z 1 ”SUI”

96 949-423 1 M4 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

97 996-438 2 I.D. 7 × T0.5 × 50

98-1 980-063 1

98-2 930-804 1 M4.0

99-1 981-974 1

99-2 306-681 1 ”GBR”

100 306-143 1

101 323-742 1

102 322-142 4 M5 × 12

103 ——————1

104-1 958-049 1 D8.2

104-2 940-778 1 D10.7

503 314-179 1

ABC D

1 318-221 1

2 318-222 1

3 305-621 2

4 306-437 6

5 318-223 1

6 996-369 1

7——————1

8 994-416 1

9 998-428 1

10 998-427 1

11 998-433 1

12 323-731 2 I.D 26.5

13 323-730 1

14 956-963 1

15 956-962 1

16 323-729 1

17 956-960 1

18 320-374 1

19 323-728 1

20 956-996 1 1AS-60

21 323-724 1

22 998-414 1

23 306-163 4 M8 × 35

24 949-433 4 M8

25 998-715 1

26 944-928 1

27 998-413 1

28 998-434 1 ”29”

29 944-921 1

30 956-955 1

31 996-364 1 M8 × 16

32 306-166 1

33 320-375 2 M8 × 16

34 306-165 1 ”18, 32, 33”

35 323-723 1

36 630-2VV 1 6302VVCMPS2L

37 944-916 1

38 944-915 1

39 323-722 1

40 323-725 1

41 620-5DD 2 6205DDCMPS2L

42 956-949 1

43 990-079 7 M5 × 16

44 998-430 1

45 ——————1

46 323-721 1 ”56, 88”

47 944-918 2 D5 × 65

48 ——————1

49 980-717 1 S-38

50 990-945 1 ”49”

51 877-838 4 M4 × 8

52 323-727 2

53 944-960 2

54 940-540 2

55 999-086 2

56 956-984 2

57 986-940 6 M6 × 45

58 980-750 2

59 980-727 2

60 990-079 8 M5 × 16

21 39

7mm

17mm

1 3

English Deutsch Français Italiano

Tool shank Werkzeugschaft Queue d’outil

Retainer Rückhalter Tige de retenue

Front cover Frontdeckel Couvercle frontal

Recessed portion Ausgesparter Teil Section rentrée

Wear limit Verschleißgrenze Limite d’usure

No. of Carbon brush Nr. der kohlebürste No. de balai en carbone

Cap cover Kappendeckel Couvercle

Hexagon socket hd. bolt Sechskantsteckfassung Boulon hexagonal

M4 × 8 für Bolzen M4 × 8 M4 × 8

Gambo dell’utensile

Sostegno

Coperchio anteriore

Parte repressa

Limite d’usura

Numero delle spazzole

di carbone

Copri-tappo

Bullone a teste

easgonale M4 × 8

Nederlands Español Português Ελληνικά

Boorschacht Barrena

Houder Retén

Voorzijde Cubierta delantera

Het verlaagde gedeelte Parte hendida

Slijtage-limiet Límite de desgaste

Nr. van koolborstel

No. de contacto de

carbón

Kap-afdekking Cubierta de la tapa

Bout met zeskantige kop Perno de cabeza

M4 × 8 hexagonal M4 × 8

Haste da ferramenta

Retentor

Tampa frontal

Parte rebaixada

Limite de desgaste

Nº de escova de carvão

Protetor da tampa

Parafuso de cabeça

sextavada M4 × 8

Στέλες εργαλείυ

Αντιστήριγµα

Μπρστιν κάλυµµα

Τµήµα πυ έει

εισωρήσει

ρι θράς

Αρ. Καρ!υνακίων

Καπάκι καλύµµατς

Μπυλνι ε#αγ. κίλης

κεαλής Μ4 × 8

ABC D

61 620-1VV 1 6201VVCMPS2I

62 956-948 1

63 600-1VV 1 6001VVCMPS2L

64 944-911 1

65 620-3DD 1 6203DDCMPS2L

66 960-251 2 D5 × 65

67 956-764 2

68 956-850 2 4 × 16

69 994-190 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

70 944-907 1

71 996-370 1

72-1 360-286C 1 110V-115V ”71”

72-2 360-286E 1 220V-240V ”71”

72-3 360-286F 1 240V ”71”

73 306-098 1

74 945-932 2

75-1 340-259C 1 110V-115V ”74”

75-2 340-259E 1 220V-230V ”74”

75-3 340-259F 1 240V ”74”

76 322-530 1

77 944-954 1

78 620-1DD 1 6201DDCMPS2L

79 323-740 1

80 323-741 1

81 ——————1

82 323-743 1

83 991-711 4

84 323-744 1

85 959-141 2

86 317-491 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

87 930-153 1

88 938-477 2 M5 × 8

89 323-726 1

90 991-690 2 M5 × 12

91 959-140 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

92 938-307 1

93 307-028 3 D4 × 25

94 984-750 2 D4 × 16

95-1 960-266 1

95-2 981-987Z 1 ”SUI”

96 949-423 1 M4 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

97 996-438 2 I.D. 7 × T0.5 × 50

98-1 980-063 1

98-2 930-804 1 M4.0

99-1 981-974 1

99-2 306-681 1 ”GBR”

100 306-143 1

101 323-742 1

102 322-142 4 M5 × 12

103 ——————1

104-1 958-049 1 D8.2

104-2 940-778 1 D10.7

503 314-179 1

ABC D

1 318-221 1

2 318-222 1

3 305-621 2

4 306-437 6

5 318-223 1

6 996-369 1

7——————1

8 994-416 1

9 998-428 1

10 998-427 1

11 998-433 1

12 323-731 2 I.D 26.5

13 323-730 1

14 956-963 1

15 956-962 1

16 323-729 1

17 956-960 1

18 320-374 1

19 323-728 1

20 956-996 1 1AS-60

21 323-724 1

22 998-414 1

23 306-163 4 M8 × 35

24 949-433 4 M8

25 998-715 1

26 944-928 1

27 998-413 1

28 998-434 1 ”29”

29 944-921 1

30 956-955 1

31 996-364 1 M8 × 16

32 306-166 1

33 320-375 2 M8 × 16

34 306-165 1 ”18, 32, 33”

35 323-723 1

36 630-2VV 1 6302VVCMPS2L

37 944-916 1

38 944-915 1

39 323-722 1

40 323-725 1

41 620-5DD 2 6205DDCMPS2L

42 956-949 1

43 990-079 7 M5 × 16

44 998-430 1

45 ——————1

46 323-721 1 ”56, 88”

47 944-918 2 D5 × 65

48 ——————1

49 980-717 1 S-38

50 990-945 1 ”49”

51 877-838 4 M4 × 8

52 323-727 2

53 944-960 2

54 940-540 2

55 999-086 2

56 956-984 2

57 986-940 6 M6 × 45

58 980-750 2

59 980-727 2

60 990-079 8 M5 × 16

English

GENERAL SAFETY RULES

WARNING!

Read all instructions

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below

refers to your mains operated (corded) power tool or

battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) Work area

a) Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust.

Power tools create sparks which may ignite the

dust of fumes.

c) Keep children and bystanders away while operating

a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded)

power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk

of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal

injuries.

c) Avoid accidental starting. Ensure the switch is in the

off position before plugging in.

Carrying power tools with your finger on the

switch or plugging in power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on.

A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

Use of these devices can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn

it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools.

Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to

be performed.

Use of the power tool for operations different from

intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool

is maintained.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach of

children and infirm persons.

01Eng_H65SD2_WE 4/19/07, 3:07 PM3

English

PARTICULAR PRECAUTIONS ON USING

DEMOLITION HAMMER

In addition to the precautions mentioned above, following

particular precautions for this Demolition Hammer should

be followed.

1. Wear earplugs to protect your ears during operation.

2. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

3. Before starting to break, chip or drill into a wall, floor

or ceiling, thoroughly confirm that such items as

electric cables or conduits are not buried inside.

4. Properly set the bit holder

5. At the start of work, confirm screw tightening.

6. When working at a highly elevated location, pay

attention to articles and persons below.

7. Wear protective shoes to protect your feet.

SPECIFICATIONS

Voltage (by areas)* (110V, 230V, 240V)

Power Input 1340 W*

Full-load Impact Rate 1400 min

–1

Weight (without cord, side handle) 18.5 kg

* Be sure to check the nameplate on this Demolition Hammer as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case ............................................................................. 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

䡬 Asphalt Cutting

䡬 Groove Digging and Edging

䡬 Crushing

䡬 Scooping Work

䡬 Grease

500 g (in a can)

70 g (in a tube)

30 g (in a tube)

Optional accessories are subject to change without notice.

APPLICATIONS

This Demolition Hammer should be applied to

demolishing concrete, chiseling off concrete, grooving,

bar cutting installation of piping and wiring, sanitary

facility installation, machinery installation, water supply

and drainage work, interior jobs, harbor facilities and

other civil engineering works.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate of this Demolition Hammer.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, this Demolition Hammer

will start operating immediately, which could cause a

serious accident.

3. Extension cord

When the work area is remote from the power source,

use an extension cord of sufficient thickness and

rated capacity. The extension cord should be kept as

short as practicable.

4. Mounting an accessory, such as a bull point, a cutter,

etc.

CAUTION

Be sure to switch OFF and disconnect the attachment

plug from the receptacle to avoid a serious accident.

NOTE

For accessories such as a bull point and a cutter, use

only Hitachi genuine parts.

(1) Cutter

Overall Length: 410, 520 mm

Width: 75 mm

(1) Scoop

Overall Length: 546 mm

(1) Bull Point

Overall Length: 410 mm

(1) Cold Chisel

Overall Length: 410, 520 mm

01Eng_H65SD2_WE 4/19/07, 3:07 PM4

English

* It is possible to attach an accessory, such as a bull

point, a cutter, etc., with any of the three types of

the accessory shank portion shapes shown below.

Air Tool Shank Bit

Standard Hex. Shank Bit (Combo Type)

Retaining Groove Bit without Collar

䡬 Mounting air tool shank and standard hexagonal

shank tools.

(1) Clean, then smear the accessory shank portion

grease or machine oil.

(2) Move the retainer to open position A and seat

the accessory, such as a bull point, a cutter, etc.,

in the hexagonal hole in the front cover (See

Fig.1).

(3) Clamp the accessory into place by bringing the

retainer to the clamp position. To make sure that

the accessory is properly mounted, pull on the

accessory (Fig. 2).

䡬 Mounting standard hexagonal shanks and retaining

groove shanks without collars.

(1) Clean, then smear the accessory shank portion

with grease or machine oil.

(2) Move the retainer to position A. Align the

accessory shank portion so that its recessed

portion is under clamp and seat the accessory,

such as a bull point, a cutter, etc., in the hexagonal

hole in the front cover (See Fig. 3).

(3) Clamp the accessory into place by bringing the

retainer to clamp position B. To make sure that

the accessory is properly mounted, pull on the

accessory (Fig. 4).

NOTE

When removing the accessory, such as a bull point,

a cutter, etc., carry out the above procedures in

reverse.

HOW TO USE THE DEMOLITION HAMMER

1. Squeeze the trigger switch after applying the tip of

the bit to the crushing position.

In some cases, it is necessary to punch the tip of the

bit against the crushing position forcibly in order to

begin the striking motion.

This is not due to malfunction of the power tool. It

means that the safe guard mechanism against no-

load striking is working.

2. Operate this Demolition Hammer by utilizing its empty

weight. The performance will not be better even if it is

pressed or thrust forcibly against the work surface.

Hold this Demolition Hammer with a force just

sufficient to counteract the reaction (Fig. 5).

GREASE REPLACEMENT

This Demolition Hammer is of full air-tight construction to

protect against dust and to prevent lubricant leakage.

Therefore, this Demolition Hammer can be used without

lubrication for long periods. Replace the grease as

described below.

Grease Replacement Period

After purchase, replace grease after every 6 months of

usage. Ask for grease replacement at the nearest

authorized Service Center.

MAINTENANCE AND INSPECTION

CAUTION

Be sure to swith OFF and disconnect the attachment

plug from the receptacle to avoid a serious accident.

1. Inspecting this Demolition Hammer

Since use of a dull accessory, such as a bull point, a

cutter, etc. will degrade efficiency and cause possible

motor malfunction, sharpen or replace with a new

one as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure

that they are properly tightened. Should any of the

screws be loose, retighten them immediately. Failure

to do so could result in serious hazard.

3. Inspecting the retainer (Fig. 1, Fig. 2)

The retainer may become loose due to excessive

use. Always, pay attention to its proper functioning

to securely hold the accessory shank portion. If any

wear and tear is found, bring this Demolition Hammer

to an authorized service center for maintenance

service.

4. Maintenance of the motor

The motor unit winding is the very “heart” of the

power tool. Exercise due care to ensure the winding

does not become damaged and/or wet with oil or

water.

5. Inspecting the carbon brushes (Fig. 6)

The Motor employs carbon brushes which are

consumable parts. When they become worn to or

near the “wear limit”, it results in motor trouble.

When an auto-stop carbon brush is equipped, the

motor will stop automatically. At that time, replace

both carbon brushes with new ones which have the

same carbon brush Numbers shown in the Fig. 6. In

addition, always keep carbon brushes clean and

ensure that they slide freely within the brush holders.

6. Replacing carbon brushes

Loosen the screws (Hexagon socket hd. bolt M4×8) of

the cap covers, then remove the cap covers (Fig. 7).

After removing the brush caps, the carbon brushes

can be removed.

After replacing the carbon brushes, tighten the brush

caps, then mount the cap covers securely.

7. Service parts list

A: Item No.

B: Code No.

C: No. Used

D: Remarks

CAUTION

Repair, modification and inspection of Hitachi Power

Tools must be carried out by a Hitachi Authorized

Service Center.

01Eng_H65SD2_WE 4/19/07, 3:07 PM5

English

This Parts List will be helpful if presented with the

tool to the Hitachi Authorized Service Center when

requesting repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

MODIFICATION

Hitachi Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

NOTE

Due to HITACHI’s continuing program of research and

development, the specifications herein are subject to

change without prior notice.

IMPORTANT

Correct connection of the plug

The wires of the main lead are coloured in accordance

with the following code:

Blue: — Neutral

Brown: — Live

As the colours of the wires in the main lead of this power

tool may not correspond with the coloured markings

identifying the terminals in your plug proceed as follows:

The wire coloured blue must be connected to the terminal

marked with the letter N or coloured black. The wire

coloured brown must be connected to the terminal

marked with the letter L or coloured red. Neither core

must be connected to the each terminal.

NOTE

This requirement is provided according to BRITISH

STANDARD 2769: 1984.

Therefore, the letter code and colour code may not be

applicable to other markets except The United Kingdom.

Information concerning airborne noise and vibration

The measured values were determined according to

EN60745 and declared in accordance with ISO 4871.

The typical A-weighted sound pressure level: 93 dB (A).

The typical A-weighted sound power level: 104 dB (A).

Uncertainty KpA: 3 dB (A).

Wear ear protection.

The typical weighted root mean square acceleration

value: 19.9 m/s

01Eng_H65SD2_WE 4/19/07, 3:07 PM6

Page is loading ...

English

Nederlands

GUARANTEE CERTIFICATE

1 Model No.

2 Serial No.

3 Date of Purchase

4 Customer Name and Address

5 Dealer Name and Address

(Please stamp dealer name and address)

Italiano Ελληνικά

Français Português

Deutsch

Español

GARANTIEBEWIJS

1 Modelnummer

2 Serienummer

3 Datum van aankoop

4 Naam en adres van de gebruiker

5 Naam en adres van de handelaar

(Stempel a.u.b. naam en adres vande de

handelaar)

GARANTIESCHEIN

1 Modell-Nr.

2 Serien-Nr.

3 Kaufdaturn

4 Name und Anschrift des Kunden

5 Name und Anschrift des Händlers

(Bitte mit Namen und Anschrift des

Handlers abstempeln)

CERTIFICADO DE GARANTIA

1 Número de modelo

2 Número de serie

3 Fecha de adquisición

4 Nombre y dirección del cliente

5 Nombre y dirección del distribudor

(Se ruega poner el sellú del distribudor

con su nombre y dirección)

CERTIFICAT DE GARANTIE

1 No. de modèle

2 No de série

3 Date d'achat

4 Nom et adresse du client

5 Nom et adresse du revendeur

(Cachet portant le nom et l'adresse du

revendeur)

CERTIFICADO DE GARANTIA

1 Número do modelo

2 Número do série

3 Data de compra

4 Nome e morada do cliente

5 Nome e morada do distribuidor

(Por favor, carímbe o nome e morada

do distribuidor)

CERTIFICATO DI GARANZIA

1 Modello

2 N° di serie

3 Data di acquisto

4 Nome e indirizzo dell'acquirente

5 Nome e indirizzo del rivenditore

(Si prega di apporre il timbro con questi

dati)

¶π™∆√¶√π∏∆π∫√ ∂°°À∏™∏™

1 Αρ. Μντέλυ

2 Αύων Αρ.

3 Ηµερµηνία αγράς

4 ΄νµα και διεύθυνση πελάτη

5 ΄νµα και διεύθυνση µεταπωλητή

(Παρακαλύµε να ρησιµπιηθεί

σραγίδα)

✄

08Gre_H65SD2_WE 4/19/07, 3:09 PM35

Page is loading ...

21 39

7mm

17mm

1 3

English Deutsch Français Italiano

Tool shank Werkzeugschaft Queue d’outil

Retainer Rückhalter Tige de retenue

Front cover Frontdeckel Couvercle frontal

Recessed portion Ausgesparter Teil Section rentrée

Wear limit Verschleißgrenze Limite d’usure

No. of Carbon brush Nr. der kohlebürste No. de balai en carbone

Cap cover Kappendeckel Couvercle

Hexagon socket hd. bolt Sechskantsteckfassung Boulon hexagonal

M4 × 8 für Bolzen M4 × 8 M4 × 8

Gambo dell’utensile

Sostegno

Coperchio anteriore

Parte repressa

Limite d’usura

Numero delle spazzole

di carbone

Copri-tappo

Bullone a teste

easgonale M4 × 8

Nederlands Español Português Ελληνικά

Boorschacht Barrena

Houder Retén

Voorzijde Cubierta delantera

Het verlaagde gedeelte Parte hendida

Slijtage-limiet Límite de desgaste

Nr. van koolborstel

No. de contacto de

carbón

Kap-afdekking Cubierta de la tapa

Bout met zeskantige kop Perno de cabeza

M4 × 8 hexagonal M4 × 8

Haste da ferramenta

Retentor

Tampa frontal

Parte rebaixada

Limite de desgaste

Nº de escova de carvão

Protetor da tampa

Parafuso de cabeça

sextavada M4 × 8

Στέλες εργαλείυ

Αντιστήριγµα

Μπρστιν κάλυµµα

Τµήµα πυ έει

εισωρήσει

ρι θράς

Αρ. Καρ!υνακίων

Καπάκι καλύµµατς

Μπυλνι ε#αγ. κίλης

κεαλής Μ4 × 8

ABC D

61 620-1VV 1 6201VVCMPS2I

62 956-948 1

63 600-1VV 1 6001VVCMPS2L

64 944-911 1

65 620-3DD 1 6203DDCMPS2L

66 960-251 2 D5 × 65

67 956-764 2

68 956-850 2 4 × 16

69 994-190 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

70 944-907 1

71 996-370 1

72-1 360-286C 1 110V-115V ”71”

72-2 360-286E 1 220V-240V ”71”

72-3 360-286F 1 240V ”71”

73 306-098 1

74 945-932 2

75-1 340-259C 1 110V-115V ”74”

75-2 340-259E 1 220V-230V ”74”

75-3 340-259F 1 240V ”74”

76 322-530 1

77 944-954 1

78 620-1DD 1 6201DDCMPS2L

79 323-740 1

80 323-741 1

81 ——————1

82 323-743 1

83 991-711 4

84 323-744 1

85 959-141 2

86 317-491 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

87 930-153 1

88 938-477 2 M5 × 8

89 323-726 1

90 991-690 2 M5 × 12

91 959-140 1 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

92 938-307 1

93 307-028 3 D4 × 25

94 984-750 2 D4 × 16

95-1 960-266 1

95-2 981-987Z 1 ”SUI”

96 949-423 1 M4 ”GBR, EUROPE, FIN,

NOR, SWE, DEN, SUI”

97 996-438 2 I.D. 7 × T0.5 × 50

98-1 980-063 1

98-2 930-804 1 M4.0

99-1 981-974 1

99-2 306-681 1 ”GBR”

100 306-143 1

101 323-742 1

102 322-142 4 M5 × 12

103 ——————1

104-1 958-049 1 D8.2

104-2 940-778 1 D10.7

503 314-179 1

ABC D

1 318-221 1

2 318-222 1

3 305-621 2

4 306-437 6

5 318-223 1

6 996-369 1

7——————1

8 994-416 1

9 998-428 1

10 998-427 1

11 998-433 1

12 323-731 2 I.D 26.5

13 323-730 1

14 956-963 1

15 956-962 1

16 323-729 1

17 956-960 1

18 320-374 1

19 323-728 1

20 956-996 1 1AS-60

21 323-724 1

22 998-414 1

23 306-163 4 M8 × 35

24 949-433 4 M8

25 998-715 1

26 944-928 1

27 998-413 1

28 998-434 1 ”29”

29 944-921 1

30 956-955 1

31 996-364 1 M8 × 16

32 306-166 1

33 320-375 2 M8 × 16

34 306-165 1 ”18, 32, 33”

35 323-723 1

36 630-2VV 1 6302VVCMPS2L

37 944-916 1

38 944-915 1

39 323-722 1

40 323-725 1

41 620-5DD 2 6205DDCMPS2L

42 956-949 1

43 990-079 7 M5 × 16

44 998-430 1

45 ——————1

46 323-721 1 ”56, 88”

47 944-918 2 D5 × 65

48 ——————1

49 980-717 1 S-38

50 990-945 1 ”49”

51 877-838 4 M4 × 8

52 323-727 2

53 944-960 2

54 940-540 2

55 999-086 2

56 956-984 2

57 986-940 6 M6 × 45

58 980-750 2

59 980-727 2

60 990-079 8 M5 × 16