TFA Infrared Thermometer SLIM FLASH Owner's manual

Brand: TFA

Model: Infrared Thermometer SLIM FLASH

Type: Owner's manual

This manual is also suitable for

31.1128

TFA Infrared Thermometer SLIM FLASH: This Infrared Thermometer measures surface temperatures of up to 199.9°C and down to -33°C within 1 second. The measurement is made without contact with the object and is therefore also ideal for measuring hot, hazardous, or hard-to-reach objects. The measured value can be read from the display for 15 seconds after the button was released. Due to the compact size and low weight, as well as the automatic switch-off function, the SLIM FLASH is ideal for on the go.

Page is loading ...

Infrarot-Thermometer



8. Technische Daten

Temperaturmessbereich: -33 °C …. + 199 °C

Arbeitsbereich: 0 °C … + 50 °C

Genauigkeit: ±2,0 °C oder 2%

Anzeigenauflösung: -9,9 °C …199 °C, 0,5 °C,

ansonsten 1°C

Ansprechzeit: ca. 1 Sekunde

Emissionsgrad: 0,95 fest

Messfleck-Verhältnis: 1 : 1

Spannungsversorgung: Batterie 1 x CR 2032

Knopfzelle

Automatische

Abschaltfunktion: ca. 15 Sekunden

Gehäusemaß: 91 x 36 x 14 mm

Gewicht: 30,5 g

(inkl. Knopfzell-Batterie)

TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877

Wertheim.

Diese Anleitung oder Auszüge daraus dürfen nur mit

Zustimmung von TFA Dostmann veröffentlicht werden. Die

technischen Daten entsprechen dem Stand bei Drucklegung

und können ohne vorherige Benachrichtigung geändert

werden.

www.tfa-dostmann.de 09/11

Infrared Thermometer



Thank you for choosing this instrument from TFA.

1. Before you use it

•

Please be sure to read the instruction manual

carefully.

•

Following the instruction manual for use will

prevent damage to the device and loss of

your statutory rights arising from defects due

to incorrect use. We shall not be liable for any

damage occurring as a result of not following

these instructions.

• Please take particular note of the safety advice!

• Please look after this manual for future refer-

ence!

2. Field of operation and all of the benefits

of your new instrument at a glance

For contact-free measuring of surface tempera-

ture even of hot, hazardous or hard-to-reach

objects.

3. For your safety

•

The product is exclusively intended for the

field of application described above. The

product should only be used as described

within these instructions.

•

Unauthorised repairs, modifications or

changes to the product are prohibited.

•

The product is not be used for medical purpose

or for public information, but is intended only

for home use. The product is not recommend-

ed for taking body temperature.

TFA_No. 31.1128_Anleitung_04_12 03.04.2012 11:07 Uhr Seite 5

1110

Infrared Thermometer



Caution!



Risk of injury:

• Do not aim too close at hot or dangerous targets!

•

Keep this instrument and the battery out of

reach of children.

•

Batteries must not be thrown into the fire,

short-circuited, taken apart or recharged. Risk

of explosion!

•

Batteries can be fatal if swallowed. If a battery

has been swallowed, get medical assistance

immediately.

•

Batteries contain harmful acids. Low batteries

should be changed as soon as possible to pre-

vent damage caused by a leaking battery.

•

Wear chemical-resistant protective gloves and

glasses when handling leaked batteries.

Important information



on product safety!

•

Do not place the instrument near extreme tem-

peratures, vibration or shock.

•

Protect the unit from large or abrupt tempera-

ture changes.

•

Do not leave the unit near objects of high tem-

perature.

•

Do not immerse the unit into water. Water can

penetrate and cause malfunction. Protect from

moisture.

•

Steam, dust, smoke, etc., can prevent accurate

measurement by obstructing the unit’s optics.

•

Protect the instrument from EMI (Electro Mag-

netic Interference) from induction heaters and

microwave ovens and Electro Static Discharge.

Infrared Thermometer



4. Use

Simply aim at the object to be measured and

press the button

•

Read the surface temperature in less than one

second. When the button is released, the last

temperature reading will hold on the display

for 15 seconds.

Distance, Spot Size, and Field of View

•

As the distance (D) from the object increases,

the spot size (S) of the area measured by the

unit becomes larger a ratio D:S = 1:1 (e.g. 10

cm distance = 10 cm spot size). To get the

most accurate temperature reading, aim at

the target as near as possible.

Please take note of the following:

•

Not recommended for use in measuring shiny

or polished metal surfaces (stainless steel, alu-

minum, etc.).

•

The unit cannot measure through transparent

surfaces such as glass or plastic. It will measure

the surface temperature of the glass instead.

5. Care and maintenance

•

The sensor lens is the most delicate part of the

thermometer. Please protect the sensor part

from dirt.

•

Clean it with a soft damp cloth. Do not use

solvents or scouring agents.

•

Remove the battery if you do not use the

product for a lengthy period.

5.1 Battery replacement

•

The battery symbol appears permanent-

ly on the right upper part of the display.

TFA_No. 31.1128_Anleitung_04_12 03.04.2012 11:07 Uhr Seite 6

1312

Infrared Thermometer



•

Change the battery when the battery

symbol appears on the display.

•

Confirm the instrument is powered off before

changing battery.

•

Open the battery compartment with a coin

(see marking).

•

Insert a new battery (CR 2032), + pole up-

wards.

•

Close the battery compartment again.

6. Troubleshooting

Problems Solutions

No display ➜ Press working button

➜ Ensure battery polarity is

correct

➜ Change battery

Display “oFF” ➜ Automatic

switch-off

Display “Hi” ➜ Temperature > 199,9°C

Display “Lo” ➜ Temperature < -33°C

7. Waste disposal

Never dispose empty batteries and re-

chargeable batteries in household

waste. As a consumer, you are legally

required to take them to your retail

store or to appropriate collection sites

depending to national or local regu-

lations in order to protect the envi-

ronment.

Infrared Thermometer



The symbols for the heavy metals con-

tained are: Cd=cadmium, Hg=mercu-

ry, Pb=lead

This instrument is labelled in accor-

dance with the EU Waste Electrical

and Electronic Equipment Directive

(WEEE).

Please do not dispose of this instru-

ment in household waste. The user is

obligated to take end-of-life devices

to a designated collection point for

the disposal of electrical and electron-

ic equipment, in order to ensure envi-

ronmentally-compatible disposal.

8. Specifications

Temperature range: -33 °C …. + 199 °C

Operating environment: 0 °C … + 50 °C

Accuracy: ±2.0 °C or 2%

Resolution: -9.9 °C …199 °C, 0.5 °C,

otherwise 1°C

Response time: approx. 1 second

Emissivity: 0.95 only

Optical resolution: 1 : 1

TFA_No. 31.1128_Anleitung_04_12 03.04.2012 11:07 Uhr Seite 7

Page is loading ...

TFA Infrared Thermometer SLIM FLASH Owner's manual

Brand: TFA

Model: Infrared Thermometer SLIM FLASH

Type: Owner's manual

This manual is also suitable for

31.1128

Download PDF

report

in other languages

italiano: TFA Infrared Thermometer SLIM FLASH Manuale del proprietario
français: TFA Infrared Thermometer SLIM FLASH Le manuel du propriétaire
español: TFA Infrared Thermometer SLIM FLASH El manual del propietario
Deutsch: TFA Infrared Thermometer SLIM FLASH Bedienungsanleitung
Nederlands: TFA Infrared Thermometer SLIM FLASH de handleiding

TFA Infrared Thermometer SLIM FLASH Owner's manual

This manual is also suitable for

TFA Infrared Thermometer SLIM FLASH Owner's manual

in other languages

Related papers

Other documents