EN-1
EN-2
This“bolt Of lighting”
indicates uninsulated
material within your unit
which may cause an electrical shock.
For the safety of everyone in your
household, please do not remove
product covering
TO PREVENT
FIRE OR SHOCK
HAZARD,DO NOT EXPOSE THIS
EQUIPMENTTO
RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE
BLADE OF PLUG TO WIDE SLOT,
AND FULLY INSERT.
The“exclamation point”
calls attention to features
for which you should read
the enclosed literature closely to
prevent operating and maintenance
problems.
The normal ventilation of the
Ventilation warning:
product shall not be impeded for
intended use.
Dripping warning:
The product shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases,shall be placed on the product.
WARNING LABEL INFORMING OF
RADIATION :
This label is placed inside the unit.
As shown in the illustration. To warn
This equipment is a Class II or
double insulated electrical
appliance. It has been designed
against further measures on the unit. The
equipment contains a laser radiating laser rays
according to the limit of laser product of class 1.
a safety connection to electrical earth.
in such a way that it does not require
WARNING:
CAUTION:
PREPARATION FOR USE
Unpacking and Setup
* Carefully remove the unit from the Giftbox and remove all packing material from the unit
itself.
* Remove any descriptive labels that may be found on either the front or top cabinet of the unit.
Do not remove any labels located on either the back or button cabinet of the unit.
* Press the CD door OPEN Button to open the CD compartment door. There is a white card in the
CD compartment which is intended to prevent the CD pickup from moving during shipment of
the product,Remove this card from the CD compartment before use.
Using AC power
1.Connect the AC power into standard household wall outlet.For dual voltage version.Make sure
that the AC VOLTALGE SELECTOR is switched to your local voltage.The default selected voltage
is 222V.50Hz
2.To switch off completely, unplug the power cord from the wall outlet.
Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
Power Supply
WELCOME
Dear Customer,
Welcome to Sytech! Thank you for purchasing the NFA Micro System SY-8036. Please read this
manual carefully before operating your product and pay close attention to the precautions which
are mentioned below. Store this user manual in a safe place for future reference. We are sure that
this new NFA Micro System will satisfy your needs.
1.FUNCTION BUTTON
-To select source of sound CD/USB/
NFA/AUX/RADIO.
2. POWER BUTTON
-Press POWER button to turn ON/OFF power.
3. RANDOM BUTTON
-In a CD/MP3/USB/SD mode, press this
button to play song in RANDOM order.Press
it twice to cancel.
4.PLAY/PAUSE BUTTON
- To start or pause MP3/CD/USB playback.
-In radio mode, press the PLAY/PAUSE button
to enter the automatic channel scan mode.
5. EQ BUTTON
-Press the EQ button to change the sound tone
to CLASSIC-ROCK-POP-JAZZ-FLAT.
6.STOP/USB/SD BUTTON
- Stop CD/MP3/USB/SD playback;erase a CD
program.
- Press and hold more than 1.5 sec to
change between USB1.1/SD media( only U-Sd).
7.LCD DISPLAY
- Displays the FM dial frequency.
- Displays the number of tracks.
8.REPEAT BUTTON
- Repeat a track CD,MP3 or USB.
- Repeat mode : Normal->Repeat 1->Repeat All
->Repeat Album ->Normal.
9.REMOTE SENSOR
10. STANDBY INDICATOR
11. TIME/PROGRAM BUTTON
-In standby mode,use this to setup the time
of the unit.
-Program and review programmed track
numbers.
12.VOLUME BUTTON
VOLUME- BUTTON
- Press and then released within 1 sec to
adjust the volume level step by step.
- Press and hold to quickly adjust the volume level.
VOLUME+ BUTTON
- Press and then release within 1 sec to adjust the
volume level step by step.
- Press and hold to quickly adjust the volume level.
13. CD DOOR
14. BACK/NEXT KNOB
BACK KNOB
- Select the previous track.
- Rotate and hold for more than 1.5 sec
rewind within a track.
-In the radio mode, rotate BACK to go to the
previous radio channel frequency.
NEXT KNOB
- Select the next track.
- Rotate and hold for more than 1.5 sec
forward within a track.
- In the radio mode, rotate NEXT to go to the
next radio channel frequency.
15.AUX/PHONES/USB/SD DOOR
- Built-in AUX/PHONES/USB/SD jack.Connect
an external audio device such as:CD,MP3,etc.
16.PRE- DN/PRE-UP BUTTON
PRE-DN BUTTON
- In the radio mode, Press and then release
within1 sec to choose the previous channel.
- In the MP3 mode,Press and then release within
1sec to enter the previous folder .
PRE-UP BUTTON
- In the ridio mode Press and then release within
1sec to choose the next channel.
- In the MP3 mode,Press and then release within
1sec to enter the next folder.
17. CD DOOR OPEN/CLOSE BUTTON
- Press to Open/Close the CD door.
18.LEFT&RIGHT SPEAKER BOXES
19.FM ANTENNA
- To improve FM reception.
20.SPEAKER WIRE CONNECTOR( R)
21.SPEAKER WIRE CONNECTOR( L)
22. AC LINE CORD
23. NFA INDUCTION PLACE
-To listen to music through the SY-8036 from
your mobile phone.
EN-4
EN-3
18
12
14
13
16
15
17
23
18
22
20
21
19
1
2
3 4
5
6
7
8
9
11
1.
2.POWER BUTTON
3. RANDOM BUTTON
4. PLAY/PAUSE BUTTON
5. EQ BUTTON
6.STOP/USB/SD BUTTON
7.LCD DISPLAY
8.REPEAT BUTTON
9.REMOTE SENSOR
10. STANDBY INDICATOR
11. TIME/PROGRAM BUTTON
12.VOLUME BUTTON
FUNCTION BUTTON
13. CD DOOR
14. BACK/NEXT TUNING KNOB
15. AUX/PHONES/USB/SD DOOR
16.PRE- DN/PRE-UP BUTTON
17. CD DOOR OPEN/CLOSE BUTTON
18.LEFT&RIGHT SPEAKER BOXES
19. FM ANTENNA
20. SPEAKER WIRE CONNECTOR( R)
21.SPEAKER WIRE CONNECTOR( L)
22.AC LINE CORD
23. NFA INDUCTION AREA
23
10
110/1 27V
220/ 230V
English
CONTROL
POWER SUPPLY
Top and front panels(See )
EN-6
EN-5
Setup the time of the unit
1.Connect the AC power(The following operation must be in standby mode).
2.Press the TIME BUTTON, the time will show up on LCD display.
3. . You can setup the
time format in 12h or 24h.
4.Press time button to confirm.
5.Then you can set the hour and the minute with the same method of steps 3-4.
Rotate the BACK/NEXT dial to select either the Hours or Minutes of the time
Remote Control
4
* Your Remote Control is supplied with one small Lithium battery type CR-2025 inside the
compartment.
* Pull out the plastic paper from the battery door before using the remote control.
* Replace the batteries when the remote control operation become unstable or the distance from
which the remote control works become shorter.
* Using the remote control unit:
To use the remote control, point it at the Remote Sensor and press the buttons gently and firmly.
remote control operation is possible within approximate 18ft (6m). However, since the remote
control range is less when the unit is used at an angle, it should be used directly in front of the
remote sensor to gain maximum distance. Do not expose the remote sensor to strong light
(direct sunlight or artificial lighting) and make sure that there are no obstacles between the remote
sensor and the remote control unit.
5
1
9
10
14
15
18
19
6
2
11
8
7
13
12
17
16
1. POWER BUTTON
2. OPEN/CLOSE BUTTON
3.INTRO BUTTON
4.MUTE BUTTON
5.RANDOM BUTTON
6.P-UP BUTTON
7.REPEAT BUTTON
8.PROGRAM BUTTON
9.BACK BUTTON
10.FUNCTION BUTTON
11.NEXT BUTTON
12.EQ BUTTON
13.PLAY/PAUSE BUTTON
14.P-DOWN BUTTON
15.BBS BUTTON
16.STOP BUTTON
17.NUMBER KEY
18.VOL- BUTTON
19.VOL+ BUTTON
3
BASIC REMOTE CONTROL FUNCTIONS:
-
-
EQ BUTTON
-
BBS BUTTON
-Press the BBS BUTTON to expand the bass boost.Press it again to cancel.
MUTE BUTTON
-
INTRO BUTTON
-
POWER BUTTON
Press the POWER BUTTON on the unit or the POWER BUTTON on the Remote Control to switch
the system ON/OFF.
RANDOM BUTTON
In CD/MP3/USB/SD mode, press the RANDOM BUTTON on the remote to play music in
RANDOM mode.Press it twice to cancel.
Press the EQ BUTTON to change the sound tone to CLASSIC-ROCK-POP-JAZZ-FLAT.
Press the MUTE BUTTON to turn off the volume whilst the music is still being played. To restore
the volume, press the MUTE BUTTON once again.
Press the INTRO BUTTON to play the first 10 seconds of each track. Press the INTRO BUTTON
twice to go back to NORMAL playback.
1.Press the FUNCTION button and select RADIO mode.
2.Tune to the required station by rotating BACK or NEXT.
Manual Tuning: Rotate BACK or NEXT and then release within 1 sec.
Auto Tuning: Press the PLAY/PAUSE button to enter the automatic channel scan mode. Then
auto-tuning operation will start automatically until a station has been found.
Preset Channel:(FM 30 preset memories)
(1) Rotate BACK or NEXT to select desired station.
(2) Press PROGRAM button once , the MEMORY number indicator will be displayed on the
screen.
(3) Push PRESET- DOWN or PRESET-UP buttons to select the desired station number.
(4) Press PROGRAM button to save that station.
(5) Repeat steps (1) to (4) for saving other stations.
3.After the end of a program, push the PRE-UP or PRE-DN button to start playing the playing the
radio stations that you selected or press the number key on the remote control.
4.Adjust the VOLUME button to the desired volume level.
5.Extend the FM antenna to its full length if you are listening to FM broadcast.
6.Turn off the radio by pressing the FUNCTION button and select another mode or press the
POWER button to turn off the unit.
7.If you switch on the unit once again after having shut down, the last frequency selected will be
memorized.
USE OF THE RADIO
USE OF THE CLOCK
EN-8
EN-7
USING THE NFA FUNCTION
This function allows you to listen to your favorite music stored on your phone, tablet through the SY-8036
speakers!(No need of Bluetooth)
1.Press the FUNCTION button to selector NFA mode.
2.Open the phone’s music player application and place the phone speakers close to the NFA induction
area (see below fig).The sound will automatically amplify and can be heard through the micro system
speakers.(Note:the phone must have a built in speaker,or else this function will not work)
3. Adjust the volume using the VOL- and VOL+ buttons.The volume level can be adjusted from the micro
system or from the phone itself.The NFA function is compatible with any audio device which includes and
external spearker.The “Near Field Audio” function amplifies the sound from the speaker and plays it back
to the main micro speakers.
To listen to the music from an MP3 ,Discman,Walkman or any other external audio device.
1.Connect the device to the AUX .
2.
-
-
output (see below fig)
Press the function button until you select AUX, the sound source of the MP3,Discman or
Walkman or other external audio device, will be heard through the micro system speakers.
Adjust the volume control to the desired level by using the VOL- and VOL+ buttons.
The external device cannot control the player; all functions must be carried out through the unit.
USING THE AUX FUNTION
CD/MP3 PLAYER
1.
4.
5.
-
-
-
2.
Different play modes:Repeat/Random
Repeat-Play the current track continuously.
Repeat all-Plays the entire cd continuously.
The SY-8036 can play Audio Discs, MP3 CD-R.
Do not try to play CD-ROM, CDi, VCD,DVD or
Computer CD’s.
Press the FUNCTION button to select the
CD mode.
2.Press the OPEN button to open the CD
compartment.
3.Insert a MP3/CD or CD-R with the printed
side facing up and press CD Door gently to
close or the OPEN button.
Press the Play/Pause on the unit to start
playback.
Press the PAUSE button to pause the playback
if necessary, Press the play button to resume
playback.
To stop the CD playback, press the STOP
button once.
Note: CD/MP3 play will also stop
When you open the CD compartment.
When you select another mode.
When the CD/MP3 has reached to the end.
Selecting a different track
During playback you can use the NEXT or
BACK buttons to select a particular track.
If you have selected a track number in the
stop or pause position, press play to start the
playback of the selected track.
Rotate NEXT once briefly for the next track,
or press repeatedly until the desired track
number appears on the display.
Rotate BACK once briefly to return to the
beginning of a current track.
Rotate BACK more than once briefly for a
previous track.
Finding a passage within a track
1. Rotate and hold down the NEXT or BACK
button.
The CD is played at high speed at this point.
Use NEXT to forward within a track; Use BACK
to rewind within a track.
When you recognize the passage you want,
release the BACK OR NEXT button and normal
playback will resume.
6.
CD/MP3 PLAYER
Playing a CD/MP3
2>Playing tracks in Repeat mode after
, the
Displaying will appear as below:
the
Repeat button has been pressed twice
3>P
, the
Displaying will appear as below:
laying tracks in Repeat mode after the
Repeat button has been pressed thirce
1>Playing tracks in Repeat mode after
, the
Displaying will appear as below:
the
Repeat button has been pressed once
MP3
4>Release tracks in playing mode after
time, Random Indicator goes off, the
Displaying will appear as below:
the
Repeat button has been pressed once four
Different play modes: Repeat
MP3
Note:-If there is no folder, press repeat
thrice, it will go to the 4 step directly.
-
-
The display will only show”MP3” when the
format of the file is MP3.
The display will only show USB when audio
files are being played from the USB.
MP3
PLAY
REP.
PLAY
PLAY
MP3
REP.A LL
PLAY
REP.
ALB UM
Repeat-plays the current track continuously.
Repeat all-plays the entire CD continuously.
Random:After pressing the RANDOM button,
the tracks will be played in random order.
Note:When connecting an external audio
device (AUX) the repeat and random function
will not be operative.
EN-9
USB audio functions
1)Press function button or STOP/USB/SD button to choose the USB or SD mode.
2)PLAY/PAUSE
3)NEXT, BACK Skip search
4)Program Track( 99 Track )
5)Repeat mode : Normal->Repeat 1->Repeat All->Repeat Album ->Normal
(There is no repeat album mode in program PLAY mode)
6) Maximum Folder : 99 Folders
7) Maximum File : 999 Files
-Press and hold the [STOP] key more than 1.5 sec at USB mode , so that the system can change
to SD mode.
-At this point “SD” will be display on screen and the system will read data from the SD card.
- If a device is successfully read, then the files are then ready to playback.
- If a device fails to be read, then “NO” will appear on the Display screen to indicate that there
is no device .
*Note : If no device is attached or the player fails to read the device when user switches over
USB to SD with pressing [STOP] key, then “NO” is displayed and the system automatically goes
back to STOP mode.
Note:
-When the unit has no CD Disc in serted into the CD slot,and a USB/SD card has been inserted,the
unit will read the USB/SD card automatically.The unit always reads from the USB first, if there is
a USB connected.
-Due to the various types of formats,the unit may not be able read some devices.For example,
some HDD and MP3 players may not be supported.
HC
PLAYING USB/SD
1>Make sure the unit is in stopo mode and there is a CD inserted in the CD slot.
2>Press the “PROGRAM” button on the Remote Control once. The display will appear as
below:
The program function can only be operated from the remote control while the unit is in
stop mode.
AUDIO CD
4>Repeat the above operation
s to program t
he next favorite tracks
. Onc
e you have selec
te
d
all the track
s you wish to press th
e “PLAY” button to play the selec
te
d aud
io files
.The d
isplay
will ap
pe
ar as below:
5>Pre
ss th
e “STOP” bu
tton onc
e to stop the p
ro
gram play.Press the “STOP” butto
n onc
e
more to eras
e th
e selected pro
gram.
1>Make sure the unit is in Stop mode with a Mp3 CD disc inserted.
2>Press the “PROGRAM” button on the remote control once. The display will appear as
below:
4>Repe
at the above operation to program th
e next favo
rite tra
ck once you ha
ve se
le
cted all
the tracks you wish to listen
,press the “PLAY” butto
n to p
lay the selected a
udio files.The
disp
la
y will a
pp
ear as below:
MP3 DISC:
Different play modes: Program
PLAY PROG RAM M p3
PLAY PROG RAM
PROGRA M
PROGRA M
PROGRA M
PROGRA M
PLAY
PLAY
PLAY PROG RAM
PROGRA M
PROGRA M
MP3
MP3
MP3
3>
appear as below:
Press the BACK or NEXT buttons to select your favorite track no.The LCD Display will
3>Press the BACK or NEXT buttons to select your favorite track no. The LCD will appear as
follow,Press “PROGRAM” again to confirm you selection.
Note: -CD MP3 can support a maximum of 99 tracks to be programmed.
-When playing an Mp3 file through a USB, the display will show USB.
CD
CD
CD
PROGRA M
PLAY
EN-10
EN-12
EN-11
PROGRAM METHOD
(1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink on the display. This prompts the user to enter the first songs in
the program PLAY list.
(2)You can select the desired tracks by using the [NEXT] and [BACK] keys.
Once these keys are pressed, the display will show the selected track.
(3)After having selected the desired tracks, press [PROGRAM] key again and it stored in the
programed tracks into memory.
(4)If press the [STOP] key during the program mode, then the selected tracks will be stored
in the memory and unit will return to STOP mode (Continuous play mode)
(5)If press the [PLAY] key during the program mode, the unit will start the playback from the .
track of the programmed track list.
st
1
Erasing a program
You can erase the content of the memory by:
- During playback,press the STOP button twice.
- Opening the CD door at anytime.
- Selecting another mode.
Care of the Cabinet
1. To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use
caution when cleaning and wiping the plastic parts.
3. Mild soap and a damp cloth may be used on the front panel.
MAINTENANCE & SAFETY
ing up.
·Make sure the CD lens is always clean.It is reconmmended to use a CD cleaner disc to make
sure the lens are always in optimum conditions.
Insert a CD,MP3, CD-R.
No CD/MP3 inserted
CD/MP3/USB playback does not work
CD/MP3/USB badly scratched/dirty
Replace/clean CD/MP3/ USB
(see maintenance)
The CD/MP3 skips tracks
CD/MP3 damaged or dirty
Replace or clean CD/MP3
- CD-R、is blank or the disc is
not finalized
Use a finalized CD- R.
EN-13
EN-14
TECHNICAL SPECIFICATIONS
GENERAL
Power Requirement AC:110/220V~50/60Hz
Power consumption AC:22 Watts
Dimensions Approx268mm(L)x273mm(W) x 156mm(H)
Operation temperature +5 ℃-+35℃
N
Aux In 3.5mm.Jack
Earphone: 3.5mm.Jack
RECEIVER SECTION
Receiving Band Stereo FM
Tuning Range
FM:88-108MHz
Presest memories 30 presets
COMPACT DISC SECTION
Optical Pickup 3-Beam Laser
Frequency Response 100Hz - 16KHz
Compatible CD audio formats CD,CD-R,CD-RW,MP3,WMA
MP3 Kbps
192Kbps,128Kbps,96Kbps,64Kbps,48Kbps,
320Kbps
AUDIO SECTION
Power output Maximum 2.5 Watt x 2
Headphone Impedance 4 ~ 32 Ohms
NFA Near Field Audio
Maximum supported capacity USB 32 GB
Maximum supported capacity SD/MMC 32 GB
ACCESSORIES
Instruction Booklet
USB compatibility 1.1/2.0
(Including 1 lithium battery CR-2025)
USB/SD-MMC COMPATIBILITY
Multifunction Remote Control
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol. Ind. La Raya.
C/ Guadalquivir, 2
Camarma de Esteruelas,
28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Micro HiFi system CD/MP3
Sytech® SY-8036 complies with the following directives:
EMC Standard: Directive 2004/108EC
LVD Standard : Directive 2006/95/EC
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
EN-15
/