Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas
Range on Gas Oven, 1 Side with
Ecoflam
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on Gas Oven, 1 Side with
Ecoflam
Modular Cooking Range Line
S90 Heavy Duty 6-Burner Gas Range on
Gas Oven, 1 Side with Ecoflam
584272 (GC1G34A1BF)S90 6 OPEN GAS BURNERS
(123,000 BTU), GAS OVEN,
ISLAND, 1SIDE OPERA TION
WITH ECOFLAM
Unit to be Electrolux S90 Heavy Duty three 17,000 BTU (5 kW) and three
24,000 BTU (7 kW) burner gas range with heavy duty 24,000 BTU (7 kW)
standard gas oven with ecoflam system. Unit to be installed in central island
type installations with operations from one side. High efficiency burners
with continuous power regulations to high power of 123,000 BTU’s (36 kW).
Thermocouples as standard on burners and oven for added safety. Body
and open base of unit entirely in 304 Stainless steel. Pan supports in heavy
duty cast iron. Unit shall have heavy duty 304 Stainless steel internal frame
with reinforcement on the top of 3 mm. Extra strength work top in heavy
duty 3 mm Stainless steel. “Lastertec” connection system permits units to
be connected to each other creating a seamless work top.
Main Features
•Unit for island type installation with operations by chef from
one side (knobs only on one side of the console).
•The three 5 kW and three 7 kW high efficiency burners suit
high performing cooking requirements for the most
demanding customers.
•Model is supplied with Ecoflam pan detection system, which
saves energy and reduces unnecessary heat radiation in the
kitchen.
•Manual gas valves with fixed high and low positions allow
precise control of the flame intensity.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Base compartment consists of a gas heated standard oven
with gas fired burner for base heat. Ovens equipped with
one Chrome-plated grid and one enameled baking tray.
•7 kW Gas oven is with thermostatic valve and thermocouple
safety device.
•Oven temperature up to 340 °C
•Thick steel base plate in the oven for an even temperature
distribution and storage.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Included Accessories
•1 of Baking sheet 2/1 GN for ovensPNC 910651
•1 of Grid, chromium plated, for ovens 2/1
GN
PNC 910652
•6 of Cast-iron pan rest for 3,5-5-7Kw
burner, 430x380mm
PNC 911912
Optional Accessories
•Solid top plate for open burner,
360x360mm
PNC 910718 ❑
•Flexible connection hose 3/4"PNC 910720 ❑
•Pan rest CNS, 430x380mmPNC 910729 ❑
•Shelf fixation, one side open bases and hot
cupboards
PNC 910771 ❑
•Shelf for open bases and hot cupboards,
for appliances with W=700 & 800mm - 1
side
PNC 910780 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911527 ❑
•Stainless steel front and back kicking
strips, 1500mm
PNC 911601 ❑
•Stainless steel front kicking strip, 1500mmPNC 911602 ❑
•Kit for back to back installation PNC 911619 ❑
•Stainless steel kicking strips, both sides,
left and right
PNC 911638 ❑