Scania Higer A80 User manual

To User

Scania Higer A80, mounted with original SCANIA chassis, is a

newly developed deluxe coach.

The coach mainly runs on the high graded road and highway for

passenger transportation and tourism, etc.

This driver’s instruction contains operation, structure, specification

and maintenance of the coach body. You are kindly advised to read the

manuals carefully for the correct operation and maintenance of your

coach.

In regard to the chassis instruction, please read the “Scania

Driver’s Instructions” and keep the operating instructions within the

vehicle.

Correct operation and maintenance can result in good

performance and longer service of the coach as well as claim

permission.

This driver’s instruction is edited on the basis of the products

before delivery from the factory. Higer Bus Company Limited reserves

the right to modify the specification or change the parts or components

of this model at any time without modification of the delivered coaches.

In case of any questions or suggestions concerning our coaches,

you are welcome to provide feedback for our continuous improvement

of our products as well as better service for you.

HIGER Bus Company Limited

Sep 2012

Catalog

Vehicle Identification ............................................................. 1

Specification .......................................................................... 2

Body Structure ...................................................................... 4

Driver’s Area ......................................................................... 5

Passenger Door .................................................................... 6

Rocker Switch ..................................................................... 11

Driver’s Seat ....................................................................... 17

Passenger’s Seat ................................................................ 20

Courier Seat ........................................................................ 22

Rear View Mirror ................................................................. 23

Pneumatic Luggage Compartment ...................................... 25

Passenger Area .................................................................. 28

Electronic Clock .................................................................. 30

Microphone Amplifier ........................................................... 33

DVD .................................................................................... 34

LCD ..................................................................................... 62

Reverse Monitor .................................................................. 63

Air Conditioning ................................................................... 65

Heating System ................................................................... 75

Defroster ............................................................................. 78

Electrical Part ...................................................................... 80

Safety Equipment ................................................................ 83

Driver Area Radiator (optional) ............................................ 89

Catalog

Webasto Water Heater (optional) ........................................ 90

Refrigerator (optional) ......................................................... 96

Toilet (optional) .................................................................... 99

Vehicle Identification

Nameplate

The coach body nameplate is riveted on the seal panel behind the

front passenger door.

1

Specification

Body

Parking on slope % ≥ 20

Passenger door - Out swing

Roof hatch 2

Window -

Double glazing front

windshield, the rest is

tempered glass

Electrical apparatus - 24V negative grounded

A/C system

Type -

Roof mounted condenser

and evaporator

Cooling power kw 30

Refrigerant - R134A

Inner

equipment

Water fountain - Optional

Refrigerator - Optional

Toilet - Optional

Electrical clock -



DVD system（Color LCD

）

-



2

Specification

Inner

equipment

Front xenon headlamps - Optional

Daylight lamp+ LED

night

lamp

-



Sealed luggage rack

- Optional

Imported skid proof floor

leatheroid

-



Composite floor

-



Guardrail -



CAN -



3

Body Structure

1 Front fog lamp 7 Passenger door pump

2

Headlamps

8

Front passenger door

3

Decoration panel

9

Front wheel

4

Windscreen wiper

10

Luggage compartment

5

Windscreen

11

Rear wheel

6 Rear view mirror 12 Middle passenger door

4

Driver’s Area

1

Driver’s seat

9

Steering wheel

2

Vehicle data recorder

10

Instrument cluster

3

Microphone amplifier

11

Headlamp knob

4

DVD

12

Emergency stop switch

5 Rocker switch(Centre console) 13 Clutch fluid filling port

6 Reverse monitor 14 Rocker switch(L-panel)

7 Vent 15 A/C control panel

8 Retarder control handle 16 Microphone

5

Passenger Door

1 Mechanical Lock

The mechanical lock is installed on the outside of front door panel.

Unlock the door

 Rotate the lock cover by 180° to expose the key hole;

 Insert the key and turn clockwise by 90°;

 Turn the handle (with the key) clockwise by 90° and then release

it. The handle will automatically turns back by 90° and the lock

pin extends out;

 Turn the key counterclockwise by 90° and then withdraw the

key;

 Rotate the lock cover to cover the key hole.

Lock the door

 Rotate the lock cover by 180° to expose the key hole;

 Insert the key and turn clockwise by 90°;

 Turn the handle (with the key) counterclockwise by 90° and then

release it. The handle will automatically turns back by 90° and

the lock pin extends out;

 Turn the key counterclockwise by 90° and then withdraw the

key;

6

Passenger Door

 Rotate the lock cover to cover the key hole.

Caution:

Once the door is secured by the key, the electro-pneumatic

controls of the door are disabled.

2. Remote Control

 Press the button“ ” to unlock the door. Press the button” ” to

lock the door.

 Replace the battery in the remote control when the indicator

light becomes dim or the control distance is reduced drastically;

 Each remote control is coded to ensure its uniqueness. Each

new coach is delivered equipped with two remote controls. If

they are lost, contact your Scania dealer.

 If the coach is equipped with only the front passenger door, the

remote control will only contains the upper row buttons.

Front passenger door

Middle passenger door

7

Passenger Door

Note:

1) The remote control will only function when the handbrake is

applied or the air pressure in the system is within the normal

range.

2) The spare remote control should be kept in a safe location;

3) Do not throw or mishandle the remote controller.

3 Rocker Switch on Dashboard

 The battery master switch if turned on (by pressing the lower

edge) will connect to bulk of the electrical system to the battery.

 The driver can control the doors with the rocker switches on the

instrument cluster.

 The driver can control the doors with the rocker switches on the

instrument cluster. “1” switch control the front door and “2”

switch control the middle door.

 Press the upper or lower part of a rocker switch to open or shut

the door respectively.

8

Passenger Door

Warning:

1) Ensure that there is no obstacle before operating the passenger

door.

2) If the passenger door is obstructed by any person or objects

during closing, it will re-open automatically.

4. Emergency Switch

Outer emergency switch

Proceed as follows to emergency open the door:

1. Turn the rotary control clockwise

2. Open the door

9

Passenger Door

Inner emergency switch

Proceed as follows to emergency open the door:

1. Turn the rotary control clockwise

2. Open the door

Note: The mechanical lock in the door must be unlocked to

be able to open the door. Otherwise, the rotary control can’t be

turned.

10

Rocker Switch

Number Icon Name Remark

1

Emergency Stop Switch

Actuate only when the

vehicle has been brought

to a stop.

2

Headlamp Knob

“0” position, marker

lamps, and headlamps

3

Hazard Warning Signal

Used only during

emergency with the

vehicle in stationary

position

11

Rocker Switch

4

Battery Master Switch

The battery master

switch if turned on (by

pressing the lower edge)

will connect to bulk of the

electrical system to the

battery.

5

Instrument Cluster

Controls Button

1.Time setting

2.Reset

3.Decrease

4.Increase

6

Front Fog Lamp Switch

*

7

Rear Fog Lamp Switch

*

8

Passenger Door Switch

*

9

LCD Switch

*

10

Windshield Defroster

Switch

This is a 2 levels control

for using heated air to

defrost the front

windscreen.

12

Rocker Switch

11

Windshield Electrical

Defroster Switch

*

12

Aisle Light Switch

*

13

Ceiling Light Switch

*

14

Driver’s Light Switch

*

15

Reading Light Switch

*

16

Night Illumination Light

Switch

*

17

Toilet Master Switch

*

13

Rocker Switch

18

Defroster Fresh Air

Ventilation Switch

*

19

Luggage Compartment

Lamp Switch

*

20

Horn Shift Switch

Switch between air and

electric horn.

21

Water Pump Switch

Turn on or off the heating

system water pump.

22

Rear View Mirror

Defrost Switch

*

23

Radiator Fan Switch

Switch-1: l

eft side

radiator fans

Switch-

2:right side

radiator fans

14

Rocker Switch

24

High Beam Switch

*

25

Fuel Heating Switch

*

26

Check

the External

Lighting Switch

Check if

the external

lightings work well.

27

Cruise Control Switch

Control the vehicle cruise

at predetermined speed.

28

White

Smoke Limiter

Switch

*

29

Traction Control Switch

Allow the wheels to rotate

at different speed

15

Rocker Switch

30

ECAS Kneeling Switch

Control the vehicle

kneeling and restore

vehicle to normal height.

31

ECAS

Total Raising /

Total Lowering Switch

Control the vehicle

raising and lowering.

32

ECAS Predetermined

Height / Normal Height

Switch

Control the

vehicle to

predetermined height

and restore vehicle to

normal height.

16

Driver’s Seat

Operation:

(1)Horizontal adjustment

Pull lever and move seat forward/backward.

Release the lever to lock the seat.

(2)Slope adjustment

Pull lever and adjust the slope by loading/unloading the front seat

cushion area.

(3)Seat cushion adjustment

Pull lever and move the seat cushion forward/backward.

17

Page is loading ...

Scania Higer A80 User manual

Related papers

Other documents