Gigabyte XM300 Owner's manual

Gigabyte
Brand
Gigabyte
Model
XM300
Type
Owner's manual
Firmware Update Guide
1. Activate the “ XTREME Gaming Engine“ software, and choose your device
2. Go to “Others” page
3. You will see the current firmware version on this page. The “Check for update”
button will show while there is a new version of firmware, if you want to update
the firmware, please double click the button.
4. After pressed “CHECK FOR UPDATE”, you will see an information window.
5. If you are ready to update FW, please press “Next”.
FW Version
information
FW Update
button
6. Choose region you want to connect, then press “Next”
7. Choose the FW version to download, then press “Next”
8. After the downloading is finished, then press the “Finish” button.
9. The firmware will start to update automatically, and you will see the progress bar
and relative information from below window.
10. Software start to flash FW,
《Important》don’t remove your device at this time
11. After updated the firmware, “ XTREME Gaming Engine“ will restart, then the
update process has been completed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gigabyte XM300 Owner's manual

Gigabyte
Brand
Gigabyte
Model
XM300
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents