MONESSEN LCUF32 Architect Guide

  • Hello! I've reviewed the specification document for the Monessen Lo-Rider LCUF32 firebox. This document includes important details such as the dimensions, framing requirements, and clearances to combustibles for this model. I'm here to help you understand these specifications and am ready to answer any questions you may have.
  • What are the actual front width dimensions of the firebox?
    What is the size of viewing area?
    What is the minimum clearance to combustibles at the back of the firebox?
    What is the minimum clearance to combustibles from the firebox's sides?
Specifications
Additional information can be found online at www.monessenhearth.com
Please consult the manufacturer’s
installation manual for all details and
requirements before making a final
design layout decision.
Lo-Rider 32
Vent Free Gas Firebox
Lo-Rider LCUF32
MODEL FRONT WIDTH BACK WIDTH HEIGHT DEPTH VIEWING AREA
LCUF32 Actual Framing Actual Framing Actual Framing Actual Framing 32" x 30"
38" 38-1/2" 25-1/2" 38-1/2" 34" 34-1/4" 23" 22-3/4"
23"
(584 mm)
3-1/2" 15-7/8"
(403 mm)
3"
(76 mm)
30"
(762 mm)
1"
(25 mm)
34"
(864 mm)
3-1/2"
(89 mm)
38" (965 mm)
32" (813 mm)
Outside
Air
Gas Access
(89 mm)
Wall Switch
Strain Relief
Outside Air
Gas Access
Electrical Access
15-7/8"
(403 mm)
9-1/8 in
(232 mm)
3-1/8"
(79 mm)
25-1/2" (648 mm)
FRONT VIEW TOP VIEW
LEFT SIDE VIEW RIGHT SIDE VIEW
Specifications
MON/LCUF32_0321
(877) 863-4350 | monessenhearth.com
Lo-Rider LCUF32
CLEARANCES TO COMBUSTIBLES
Minimum Side Wall
Unit Gray area is
combustible
material
White area is
non-combustible
material only
1"
2"
3"
4"
5"
6"
7"
8"
9"
1"
2"
3"
4"
5"
6"
9”
6”
9”
MINIMUM HEARTH DIMENSIONS
MANTEL LEG CLEARANCES
0" to back
0" to side
0"
Drywall
Combustible flooring may be installed next to the front of the appliance.
(No carpet or vinyl within 14")
6"
(152 mm) min.
9"
(229 mm) min.
(from firebox opening)
Drywall
Perpendicular
Wall
36"
(914 mm)
Combustible Object
42" to ceiling
(1067 mm)
0"
0"
9
Monessen • ACUF32/36/42 Installation Manual • 4136-901 • Rev A • 01/21
FRAMING DIMENSIONS
28-7/8"
15"
20-3/8"
28-1/2" 22-5/8"
B
A
C
D
D
F
E
A B C D E F
38-1/2"
(978mm)
34-1/4"
(870mm)
22-3/4"
(578mm)
50-1/2"
(1283mm)
71-3/8"
(1813mm)
35-3/4"
(908mm)
PRODUCT LISTING CODES
US ANSI Z223.1 / NFPA54
ANSI Z21.11
CSA Design Certified
Additional information can be found online at www.monessenhearth.com
Product information provided is not
complete and is subject to change
without notice. Product installation
must adhere strictly to instructions
accompanying product to avoid risk
of fire and potential injury.
MANTEL CLEARANCES
1"
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
12"
13"
14"
15"
16"
17"
18"
1"
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
12"
13"
14"
15"
16"
17"
18"
Gray area is
combustible
material
White area is
non-combustible
material
Measured from top of appliance opening
6"
minimum
18" maximum
17"
17"
3" minimum
/