G-STORY GS116HR User manual

Type
User manual

This manual is also suitable for

USER’S MANUAL FOR LED MONITOR
VILSUN (H.K.) LIMITED
1
2
3
Installation 6
OSD Menu 9
Remote Control 11
Specification 12
12
Environmental Precautions
TABLE OF CONTENTS
Safety Precautions
Content of the Package
2
Do not modify or tamper with this product.
Do not pull roughly or bend the cable.
Keep away from dusty or humid areas.
Only use included AC adapter.
Do not get wet.
Avoid tou ching the External Input Terminal. Proloned exposure can cause burns.
Caution
Make sure the console is turned off and disconnected before mounting.
Only use designated AC adapter and cables.
Do not twist the cable.
Do not place on ustable surface.
Disconnect the AC adapter when maintaining the monitor.
Disconnect AC adapter when transporting.
Do not lift holding only the monitor.
Disconnect AC adapter when not in use for an extended period of time.
Avoid places of direct sunlight during storage.
Do not place anything on top of the monitor.
Do not abuse or misuse this product by applying unnecessary force.
Keep this product away from childten.
Do not abuse or misuse this product by applying unnecessary force.
Avoid prolonged use of the monitor.
Use of product at high volume for an extended period of time may result in hearing loss.
Before using this product please read the instructions carefully.
About the LCD screen.
Do not abuse or misuse this product by applying unnecessary force.
Avoid damaging the LCD screen.
Disconnect the AC adapter when maintaining the monitor, Clean only with a dry or
slightly damp cloth. Using cleaning solutions or attempting to clean connectors may
damage this product.
Disposal
Dispose in accordance with local and national disposal regulations (if any).
SAFETY PRECAUTIONS
3
Before you open the packing of the LCD Monitor,pls prepare a stable and clean desk
that is near to the power plug on the wall for your monitor and computor.
GS116HR GS116SR GS116PR
OK
F1 F 2
ME N U
EXIT
SOURCE
SC A L E
MU T E
P
-
UP
MU T E
+
DO W N
Buckle 2 pcs
Adapter 1pc
HDMI cable
1pc
Manual 1pc
Warranty card
1pc
Thank you card
1pc
The remote
control
1pc
GS116XR
Monitor 1 set
*ALL the picture and component in this manual is for reference only,please see the final product for detail
information. We preserve the right to update the product without notice.
CONTENT OF THE PACKAGE
4
INCLUDED
Fuction Instruction of components
1
2
3
4
5
6
7
8
1
2 3 4 5 6 7 8
OK
SOURCE
2 3 4 5 6 7 8
OK
SOURCE
2 3 4 5 6 7 8
OK
SOURCE
GS116HR
GS116SR
GS116PR
GS116XR
2 3 4 5 6 7 8
OK
SOURCE
Front
LED light
Key
Light for PS4 monitor,display on the monitor via IR lens
HDMI port: Turn down after choose arrow key
MENU Key
Call out the menu options of the monitor or exit the menu
options.
/SOURCE Key
HDMI port: SOURCE fuction key(Siginal source) when no
display on the screen;Arrow keys when display
MENU or other options
Key
Arrow key to left and voice down
/OK Key
Arrow key to right and turn volume up.
Confirm the menu option.
LED light
Working status of Monitor:
Red: Standby
Green: Working
Key
Power switch
*ALL the picture and component in this manual is for reference only,please see the final product for detail
information. We preserve the right to update the product without notice.
9
9
9
9
9IR
Remote control receive
5
INCLUDED
Install & Connecting Instruction
9
10
11
12
10 11 12
9
GS116HR
GS116SR
GS116PR
9
9
10 11 12
10
11
12
GS116XR
9
10 11 12
Back
Stereo sperker HDMI input port
3.5mm Stereo earphone output port:Stereo earphone
sockets,able to use 2 earphones
Power input port
Input 5~12V direct power supply
*ALL the picture and component in this manual is for reference only,please see the final product for detail
information. We preserve the right to update the product without notice.
6
INSTALLATION
Install & Connecting Instruction
1.2 Installation for GS116XR
Place the monitor(with protective foam) on Xbox one S console steadily as showed in picture 1
1. Put the monitor above the Play Station4
The monitor shall be put on the PS4 steadly and aligned
2. Fix the monitor
Uplift the screen of the monitor,refer to Picture 1
Take out the buckles from the accessory and fasten the monitor
Plicture 1
Plicture 1
Picture 2
Take out the buckles from the accessory and fasten the monitor
Fashen the buckle on the monitor first,refer to the first picture of Picture 2
Put the buckles into the card slot along the direction of Picture 2 arrow,refer to the second picture of
7
INSTALLATION
2.2 Installation for GS116XR
Fix the monitor on the top of Xbox one S console with buckles provided as below picture 1.
Note: Please make sure the monitor is well
placed on the top of the console as showed
in picture 1 and picture 2.
The procedures in picture 2 are as below
Put the buckle on the card slot of the monitor downward
as per arrow 1 then tighten the monitor and console with
the buckle.
Push the buckle inward to the front side of the
Xbox One S console as per arrow 2
3.Connecting
HDMI out
Plug the AC terminal of
the adaptor in the power
socket of the electric
supply
Plug the AC terminal of
the adaptor in the power
socket of the electric
supply
HDMI OUT port
Connect the HDMI port of the monitor to the HDMI therminal of Game consoles with HDMI cable of accessory
Plug the DC terminal of the adaptor from the accessory in the DC IN port (12V) of the monitor
Plug the AC terminal of the adaptor in the power socket of the electric supply
Plicture 1
Picture 2
8
INSTALLATION
Install & Connecting Instruction
4.Power on
Power switch
LED light
Power switch
LED light
Lift the screen of the Monitor
Press the power key
LED light will turn green after flashing for 3 times,Automatic display screen or blue screen standby signal
channel
Remark: In the last step of connecting,please choose HDMI port 1 if HDMI cable is connented to port 1,
otherwise, please choose port 2
Turn on the power of the PlayStation4
9
The main menu
Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
Press“MENU”key to show the main menu,how to choose
sound menu by press“LEFT/RIGHT”key
BRIGHTNESS Adjust the brightness of the display.
CONTRAST Adjust the contrast of the display.
ECOSelect the picture mode among Standard, RTS, FPS,
TEXT, MOVIE,GAME.
DCROpen or close the dynamic contrast ratio function.
SHARPNESS Adjust the sharpness level of the picture.
BLACK LEVEL : Adjust dark field effect of the picture
BRIGHTNESS
BRIGHTNESS
CONTRAST
ECO
DCR
SHARPNESS
50
50
STANDARD
OFF
2
50
BLACK LEVEL
SET
H.POSITION Adjust the screen horizontal position.
V.POSITION Adjust the screen vertical position.
CLOCK Removes any vertical interface.
PHASE Removes any horizontal interface.
ASPECT Select the picture aspect among auto, wide and 4:3.
IMAGE
H.POSITION
V.POSITION
CLOCK
PHASE
ASPECT
50
50
WIDE
50
50
COLOR TEMP. Select an optimum color temperature (USER,
WARM, COOL and SRGB) .
RED : Fine Tuning Red Color Temperature.
GREEN : Fine Tuning Green Color Temperature.
BLUE : Fine Tuning Blue Color Temperature.
COLOR TEMP.
COLOR TEMP.
RED
GREEN
BLUE
50
50
50
USER
Press“MENU”key to show the main menu,how to choose
sound menu by press“LEFT/RIGHT”key
Note:
1. According to different input signals, the available functions maybe not the same.
2. Some items are disabled in gray when they are unavailable in a certain mode. Those items are enabled
when corresponding modes are activated.
PICTURE POSITION
COLOR
OSD MENU
10
OSD SET
LANGUAGE Select your desired language from the OSD menu.
OSD H.POS. Adjust the OSD menu horizontal position.
OSD V.POS. Adjust the OSD menu vertical position .
OSD TIMER Adjust the OSD display time.
TRANSPARENCY Adjust the transparency of the OSD menu.
OSD SETTING
LANGUAGE
OSD H.POS.
OSD V.POS.
OSD TIMER
TRANSPARENCY 0
50
50
10
Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
RESET
IMAGE AUTO ADJUST Press to adjust the position of the picture
automatically.
COLOR AUTO ADJUST Press to adjust the color of the picture
automatically.
RESET Press to restore factory settings.
AUTO POWERDOWN : Open or close the auto powerdown.
Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
RESET
IMAGE AUTO ADJUST
COLOR AUTO ADJUST
RESET
AUTO POWERDOWN OFF
HDR MODE AUTO
HDR MODE : Select the HDR function working mode.
SIGNAL SOURCE Select your desired input source among auto,
HDMI 1 and HDMI 2.
VOLUME Adjust the volume of the monitor.
FREE SYNC: Open or close the free Sync function.
MISC.
SIGNAL SOURCE
LOW BLUE LIGHT
VOLUME
FREESYNC
OD
0
OFF
50
HDMI 1
OFF
1920 x 1080 60HZ
LOW BLUESelect the blue light of the picture among week,
medium, strong and strongest.
OD: Open or close the over drive of the monitor among.
OTHERS Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
Note:
1. According to different input signals, the available functions maybe not the same.
2. Some items are disabled in gray when they are unavailable in a certain mode. Those items are enabled
when corresponding modes are activated.
OSD MENU
11
REMOTE CONTROL
OK
F2
MENU
EXIT
SOURCE
SCALE
MUTE
-
P
DOWN
UP
+
Standby mode tum on/off
Call out sources interface for fast source
switch
To select the screen display aspect ration
Moving up the menu options
Move down the menu options
Use to confirm menu selection,as ENTER
Turn volume of f/on
Display the main menu on screen
Exit the function keys
Picture mode function key
“Game plus”Function keyboard shortcuts
Sound mode function key
F1
P
F2
The volume + / menu option moves to the
right key
The volume - / menu options left key
SOURCE
MENU
MUTE
SCALE
EXIT
F1
12
SPECIFICATION
GS116HR GS116SR GS116PR
1.9kg 1.8kg 1.9kg
279x278x31mm 278x279x28.2mm 306x295x28.5mm 215x300x26mm
GS116XR
Screen Size
Product Size
Product Weight
Resolution
Color
Brightness
Response time
Input port
Sound output
Viedo support
Power supply
Power Consumption
Tempreture : 5°C~40°C
Humidity : 20RH~85RH(Non-Condensing)
Operating
Tempreture : -20°C~60°C
Humidity : 10RH~85RH(Non-Condensing)
Store
11.6” 11.6” 11.6” 11.6”
1.5kg
1920x3(RGB)x1080
16.7M
350cd/m²
8msTYP
HDMI x 2
Maximun 15W
External adapter DC 12V/2A(optional accessory)
480P720P1080I1080P
Stereo speaker x 2 Stereo earphone x 2
ENVIRONMENTAL PRECAUTIONS
HDR / OD / FREESYNC / LOW BLUE
Support functions
USB power DC 5V/3A + switch cable (optional accessory)
Note:1. This patchcord is apply to 5V/3A power adapter and mobile power
supply.
2. If the screen keeps flashing when charging by mobile power supply,
it means that its battery is low and you need to shut it down to charge
it.
1
2
3
4
5
7
10
12
リモコン
13
13
環境についての注意事項
製品の規格
2
3
4
あなたの分解液晶ディスプレーの包装前に、あなたの液晶モニターは、ゲームの本体の準備
に强固に、平衡を、きれいに近づく電気コンセントのデスクトップ。
GS116HR GS116SR GS116PR
OK
F1 F 2
ME N U
EXIT
SOURCE
SC A L E
MU T E
P
-
UP
MU T E
+
DO W N
GS116XR
リモコン
保证书
感謝カード
5
1
2 3 4 5 6 7 8
OK
SOURCE
2 3 4 5 6 7 8
OK
SOURCE
2 3 4 5 6 7 8
OK
SOURCE
GS116HR
GS116SR
GS116PR
GS116XR
2 3 4 5 6 7 8
OK
SOURCE
ポジティブ
機能記述の各部分
* この手帳の中の挿絵と部品はご参考まで、実物に準じてください。
当社は製品を更新する権利がある。事前に告知ないで,ごめんなさい。
メニューの選択肢を表現する。あるいは、
メニューの選択肢を退出する。
メニューの選択肢を確認
する。
9
9
9
9
9
IR
リモコン受光点
6
機能記述の各部分
リア
10 11 12
9
GS116HR
GS116SR
GS116PR
9
9
10 11 12
10
11
12
GS116XR
9
10 11 12
* この手帳の中の挿絵と部品はご参考まで、実物に準じてください。
当社は製品を更新する権利がある。事前に告知ないで,ごめんなさい。
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

G-STORY GS116HR User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages