2. ROOMS TO GO
  3. 18118314

ROOMS TO GO 18118314 Assembly Instructions

  • I've reviewed the provided assembly instruction for the Accent Chair. The document outlines the necessary parts and steps for assembling the chair, including diagrams for each step. It also lists the required hardware, such as bolts, washers and the Allen wrench needed for assembly. I'm ready to answer any questions you have about putting it together.
  • What tools are needed for assembly?
    What are the main parts of the chair?
    What kind of washers included?
Parts# Parts Name Drawing Qty
P1 Seat 1
P2 Wood front legs 2
P3 Wood back legs 2
H1 Bolts(size:55*8mm) 8
H2 Flat Washers 8
H3 Allen wrench 1
H4
Spring washers 8
Step 1. Turn the chair upside down and lay on protective carpet
Open the black fabric of the bottom,and take out the legs underneath the seat.
Step 2: Insert the front legs(P2) and back legs (P3)into the Seat （P1) bottom，Lock legs by
Step 3:Close the black fabric of the bottom,Turn the chair over
ASSEMBLY INSTRUCTION— Accent Chair
using Flat washers (H2) and spring washer(H4) and bolts (H1). Then tighten the bolts with
allen wrench (H3).
P3
P2
H4
H1
H2
H3
H3
H2
H1
H4
x8
x8
x1
P1
P1
/