1exd-drill-detail
A
B
(Flush) SCE-72XM***
5.50 SCE-84XM***
8.50 SCE-90XM***
14.17 SCE-72XM****
19.67 SCE-84XM****
22.67 SCE-90XM****
2.25
4.88
1.94
.88
.88
.81
.75
.75
See other pages for
mounng details
SCE-EXD** external
disconnect enclosure
Front View
Top View
Detail A Detail B
Right Side View
(EXD Removed)
Main enclosure and SCE-EXD enclosure
disconnect mounng holes will be
aligned horizontally when SCE-EXD
enclosure is properly located vercally
Drill (2) clearance holes for 10-32
hardware 2plcs if SCE-EXD enclosure
is ush with the top of the main
enclosure or oset from the top.
Drill (2) clearance holes for 10-32
hardware 2plcs if SCE-EXD enclosure is
oset from the top the enclosure. The
bracket and fasteners are not required if
the SCE-EXD enclosure is ush with the
top the main enclosure.
Installation Manual Cutout-Detail
Page 2 SCE-EXD12
Cutout Pattern
Page 3 SCE-EXD18
Cutout Pattern