2. SCE
  3. SCE-72XD6618

SCE SCE-72XD6618 Installation Information

  • Hello! I'm your chat assistant, and I've reviewed the provided installation manual for Saginaw Control's SCE-EXD series enclosures. This document contains details for cutouts, drilling instructions, and mounting information for flush and offset installations. I am ready to assist you with any questions you have regarding the installation or specifications outlined in the manual.
  • What are the drilling requirements for mounting the SCE-EXD enclosure?
    Are brackets and fasteners always required?
    How are the main and SCE-EXD enclosure mounting holes aligned?
1exd-drill-detail
A
B
(Flush) SCE-72XM***
5.50 SCE-84XM***
8.50 SCE-90XM***
14.17 SCE-72XM****
19.67 SCE-84XM****
22.67 SCE-90XM****
2.25
4.88
1.94
.88
.88
.81
.75
.75
See other pages for
mounng details
SCE-EXD** external
disconnect enclosure
Front View
Top View
Detail A Detail B
Right Side View
(EXD Removed)
Main enclosure and SCE-EXD enclosure
disconnect mounng holes will be
aligned horizontally when SCE-EXD
enclosure is properly located vercally
Drill (2) clearance holes for 10-32
hardware 2plcs if SCE-EXD enclosure
is ush with the top of the main
enclosure or oset from the top.
Drill (2) clearance holes for 10-32
hardware 2plcs if SCE-EXD enclosure is
oset from the top the enclosure. The
bracket and fasteners are not required if
the SCE-EXD enclosure is ush with the
top the main enclosure.
Installation Manual Cutout-Detail
Page 2 SCE-EXD12
Cutout Pattern
Page 3 SCE-EXD18
Cutout Pattern
2exd-drill-detail
SCE-EXD12
12.00
6.00 3.00
3.00
1.61
1.08
14.19
27.73
2.25
.75
.75
18.06
4.50
2.28
3.25 3.255.50
1.75
9.19
7.44
7.44
10.44
Ø0.25 x9
Mounng holes
Ø0.25
Through hole
3.00
3exd-drill-detail
SCE-EXD18
x11
Ø0.25
Through hole
/