2. OMIX
  3. Front Cargo Seat Cover in

OMIX Front Cargo Seat Cover in Installation guide

  • Hello, I'm your chat assistant. I've reviewed the installation instructions for the Quadratec Cargo Seat Cover, which includes steps for both the Black and Tan models. This document covers the process of attaching the covers, securing straps, and ensuring safety with airbags. I am ready to help you with any questions based on this instruction.
  • How many pieces of cargo seat cover are included?
    How many cargo cover storage bags are included?
    What should be done with the headrest during the installation?
COV-A Front Cargo Seat Cover (Black)
COV-B Front Cargo Seat Cover (Tan)
Universal Front Cargo Seat Cover Installation Instruction
PG.1
1. Attach rear cover to
front cover buy
looping the top two
strap through buckles
as shown. Do Not
tighten at this time.
2. If equipped, head rest
should be raised or
removed.
3. Slip cover over
top of seat. Pull down
into position. Straps
should be placed
above and below
lever if equipped.
6. If seat is equipped with
side air bags make sure
straps are clear of
deployment zone.
Content: (1) 2 pcs Cargo Seat Cover
(7) Cargo Cover Storage Bags
4. Slide front hold down
strap between upper
and lower seat
sections. Reclining
the seat will ease
strap installation.
7. Attach top Velcro
strap and front
hold down strap to
back cover.
5. Adjust side straps to
center cover over front
and back of seat.
8. Secure all upper
seat straps at this
time making sure
cover is centered.
9. Pull sides around
seat base and attach
retainer hooks to
suitable points
under seat base.
10. Test all seat
functions. Hooks
and straps should
not effect seat
movement.
11. Inspect and make
any final adjustments
needed.
12. Attach Cargo bags
as desired.
Rev. 1 (11/11/09)
/